How can I work from home with Allplan without a direct LAN connection to a common file storage folder?
1. Working from home with direct access to the central data
If you want to work together on projects, you can use Allplan Share, Allplan’s cloud solution, to work with Allplan without a LAN connection to the central file storage folder. This is only possible if Allplan is installed as a standalone version on a computer without access to a central file storage folder; otherwise, Allplan does not start. If the computer is part of a workgroup installation, the computer must be checked out and used outside the LAN (like a standalone workstation). Data access is via cloud services.
This is only possible if you use Allplan Share for cloud storage.
Working with Allplan Share is just as simple as working at a standalone workstation. You and several other users can access and edit a project at the same time.
To get more information on Allplan Share, use the following link or contact your sales partner:
You can also find further information on Allplan Connect; use the following link:
VPN is not useful for common project storage.
Allplan exchanges many files with the data server. VPN uses advanced encryption, which considerably slows down data transfer.
A connection via VPN is not approved for Allplan because data might get damaged even if the connection is interrupted only briefly. In addition, working over the internet is extremely slow if the internet connection is not fast enough (at least 100 Mbit).
Allplan does not support a VPN connection with IPv6; Allplan detects only IPv4.
Make sure that the VPN connection does not switch to sleep mode.
Please note that we cannot provide support for this constellation.
2. Working from home without access to the central file storage (working locally):
2.1 Allplan with workgroup manager:
If workgroup manager is included in your license, you can check out a computer or laptop with projects from the workgroup environment. You can then work from home without access to the server. The projects on the computer or laptop that is checked out are locked for the CAD users on the network. These users see the comment you entered when you checked out the computer.
You can find instructions at
When you use a license server, you can get the license via a VPN connection or borrow the license beforehand:
2.2 Allplan without workgroup manager:
Using the office computer
If you have neither workgroup manager nor network access, you must uninstall Allplan and install it again by specifying the local paths. To work with a project, you must back it up and then import it to the local installation.
Using a new (private) computer
If you want to use a new computer to work from home, you must return the license at the office computer and then use this license to install Allplan on the new computer.
We recommend that you do not mix data from the office computer and the private computer. Merging data later involves considerable time and effort.
Use the following link to find out how to transfer projects:
Allplan does not start. When you open license selection in the license settings, you can see the following message: "Cannot find a license for running Allplan." Sometimes you might also see one of the following error messages: "This license is no longer available", "CmActLicense runtime system is not installed!" or "NemAll_DataResource20.dll: Start Error 102". Allplan no longer starts after these messages. How to solve this problem?
Check the following points:
On the client:
Open the license settings: Services application -> Utilities -> License settings
1. Has the license been blocked on the client?
Check the 'License selection' area to find out whether your license has been blocked. This is indicated by the symbol. If the license is blocked, Allplan cannot use it.
Click this symbol to unblock the license again. If you want, you can select the check box in front of the license to select it as a favorite. Allplan will then prefer this license.
If you do not select any license or if you have selected several favorites, Allplan will automatically use the first free license it finds.
2. Has the server been found?
Select the 'Find license server automatically' option. You should now see the license provided by the server.
Note: In some cases, such as VPN connections, Allplan may not be able to detect a server automatically. In this case, you can enter the server manually.
3. Is the local Windows service, which is used by licensing, running correctly?
If communication with the local Wibu service is blocked, Allplan cannot find the license anymore. This is often caused by the virus scanner.
So you need to exclude the "Codemeter" folder from virus scans. You can find this folder in the following path: C:\Program files (X86)\Codemeter or C:\Programme (x86)\Codemeter
Then restart the service:
Start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen and enter Codemeter.
CodeMeter Control Center -> Process -> Start CodeMeter Service
If the service is running, stop it and restart it.
On the license server:
4. Is the 'Start network server' option active?
Start CodeMeter Control Center on the server.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen, enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.
Enter Localhost:22350in the address bar of your browser.
- Select Settings -> Server -> Access serverin the Network serverarea and click Activate.
Update the license settings on the client. To do this, click Updateor open the dialog box with the license settings again. You should now see the license on the client.
5. Restart the license server service on the server
To start and stop the license server service, you can use CodeMeter Control Center.
- CodeMeter Control Center -> Action -> Stop CodeMeter Service
- CodeMeter Control Center -> Action -> Start CodeMeter Service
Update the license settings on the client. To do this, open the dialog box with the license settings again. You should now see the license on the client.
6. Is the virus scanner blocking the Windows service, which is used by licensing, at the server?
If communication with the Wibu service is blocked, Allplan cannot find the license anymore. This is often caused by the virus scanner.
So you need to exclude the "Codemeter" folder from virus scans.
You can find this folder in the following path: C:\Program files (X86)\Codemeter or C:\Programme (x86)\Codemeter
In addition, exclude the C:\Program Files\Allplan GmbHfolder.
Then restart the license server service:
If the service is running, stop it and restart it.
7. Check the firewall
Allplan communicates with the license server via TCP/IP. By default, communication is via port 22350 unless you change the port in CodeMeter WebAdmin. So you need to configure the firewall accordingly.
If a firewall is active on your computer, you must enable port 22350 for TCP and UDP. If the firewall filters in an application-specific manner, you have to enable the CodeMeter.exe license server service. You can find this service in the %Program Files (x86)%\CodeMeter\Runtime\bin Windows folder. Define the CodeMeter.exe service as an exception in the firewall. Some anti-virus programs also include firewall functions. If you are not sure, contact the manufacturer of the anti-virus program.
How can I check out a computer and continue to work as a normal CAD user with my usual settings and permissions?
Install the "Microsoft Loopback Adapter" driver.
This driver is necessary so that network services are running on the computer all the time.
Go to Allplan Connect for a detailed description: https://connect.allplan.com/en/faqid/000162ae.html
Sign in as the Allplan administrator to the computer.
Step 1: add the computer to workgroup manager
You must add the computer to the workgroup so that you can store data (data server) on this computer. Do the following:
Create data folders:
Create a folder - for example, “Nemdata” - on the computer and share it (full control).
Create the “Allplan” subfolder in this folder. Create two subfolders - “usr” and “prj” - in the Allplan folder.
In this example: “...\Nemdata\Allplan\prj” and “...\Nemdata\Allplan\usr”
To share a folder for the Allplan file storage
- Start File Explorer on the computer that you want to use for file storage and switch to the folder that you want to share (in this example, the “Nemdata” folder).
- Right-click the folder that you want to share and select Give access to -> Specific peopleon the shortcut menu.
- Select Everyoneand click Share.
- Start the Services application as the workgroup administrator.
- Click and select Manage computers and projects.
- Click the Add any computer to Allplan workgroupicon and select the computer that you want to add.
- Select the “Allplan” subfolder under the share and click “OK” to confirm. This computer is now listed under workgroup server.
Note:If you have problems adding the computer to workgroup manager, read the following instructions:
Step 2: define project owner
A user can only move a project if the user is the owner of this project.
The ownership of a project can only be changed by an Allplan administrator (or the owner of the project).
Allplan -> File -> ProjectPilot ->
Go to the “Projects” node, right-click the required project and click Propertieson the shortcut menu.
Define the owner.
Step 3: move projects
Sign in as the user who wants to check out the computer.
Select the Services application -> Workgroup Manager -> Manage computers and projects.
Click the main server and select the project that you want to move.
Drag the projects one after the other to the computer to be checked out.
Important note: You can take projects with you in several ways.
1. You move the project to the computer.
Move project: Drag the project to the destination computer, or open the shortcut menu of the project and click “Cut”. After this, open the shortcut menu of the destination computer and click “Paste”.
After you have checked in the computer, move the project back to the server so that it is available to all and included in backups again.
2. You copy projects. Click a project, select and hold the Ctrl key and drag the project to the destination computer. Or: Open the shortcut menu of the project and click “Copy”. After this, open the shortcut menu of the destination computer and click “Paste”.
You can continue in two ways: Lock the original project on the server to protect it from changes. Consequently, nobody in the office can work on this project, but it is still on the server. When you check in the computer again, you unlock the project on the server, delete the project and copy your copy back to the server if you have changed the project.
Alternatively, both projects remain active. Consequently, both the project copied and the original on the server can be worked on. In this case, however, you must adjust the data manually when you are back in the office by copying the changed drawing files of the projects by using ProjectPilot.
Step 4: check out the computer
Select the Services application -> Workgroup Manager -> Manage computers and projects.
Click your computer and then click Check outin the lower-right area.
Confirm the message that tells you that there are still user folders on the computer to be checked out.
Enter a comment and click OK. Users in the office see this comment when they try to access a project that is on the computer that is checked out.
Specify the parts of the office standard you want to copy to the computer and click OK to confirm.
The first time you check out the computer, you must copy the office standard once so that the entire STD folder is on this computer. This is no longer necessary when you check out the computer afterward because the contents of the STD folder do not change very often.
You can now remove the computer from the network and work on your projects when you are out of the office. To make sure that the projects are not changed in the office in the meantime, the projects that are on the computer checked out are locked for the CAD users on the network. These users see the comment you entered when you checked out the computer.
- You can only check out a computer to which you are signed in. You cannot check out another computer over the network.
- Projects on this computer must be neither locked nor in use.
- For installations with license server: You must also borrow a license from the license server for the computer you want to check out.
Description of the Nemetschek Softlock license server:
Description of WiBu license server:
Allplan 2016: https://connect.allplan.com/en/faqid/20150618134322.html
Allplan 2017 and later: https://connect.allplan.com/en/faqid/20160523165423.html
How can I set up Allplan Share? What are the requirements?
1)System requirementsfor Allplan Share
Allplan Version 2018 or higher
Network infrastructure required
A 20-Mbit/s Internet connection for downloading and uploading data
At least a 50-Mbit/s Internet connection for downloading and uploading data
You have two options to buy the Allplan Share option.
1. You can visit the Allplan Shop at ‘shop.allplan.com’.
Allplan Options -> Allplan Share
a. Specify how many licenses you want to buy and add the Allplan Share option to the cart.
b. Follow the instructions displayed and buy the Allplan Share option.
After you have bought the Allplan Share option, the licenses will be assigned to your Bimplus team. You can manage these licenses using ‘My Account’ - ‘Subscriptions and Users’.
2. You can contact the Allplan sales partner in your area.
3) Assigning licenses
Regardless of how you buy the Allplan Share option, you can manage the Allplan Share licenses in the Allplan Shop. Go to the ‘Subscriptions and Users’ area. As an alternative, you can also manage the licenses on the Bimplus portal. Here, go to the ‘Team members’ area.
Allplan Shop - ‘Subscriptions and Users’
1. Log in to the Allplan Shop and open ‘My Account’.
2. Click ‘Subscriptions and Users’ to see your licenses.
3. Select the Allplan Share option on the tab.
4. You can assign one or more Allplan Share licenses to team members. To do this, select the user in the list and assign the license by selecting the check box. You can remove the license at any time by clearing the check box.
If the list does not include the user to whom you want to assign a license, click ‘Invite new Bimplus team member’, enter the email address of the new team member and select a role.
As soon as the new team member has accepted the invitation, you can find this person in the list.
4) Using Allplan Share
To use the Allplan Share option, you require Allplan 2018. The Workgroup Manager option is not necessary.
Starting a project
You have three options to start an Allplan Share project:
1. You can create a new project and save it on Bimplus by setting the location to BIMPLUS. To create a Bimplus project with Allplan Share content, you require ‘Bimplus team owner’ or ‘Bimplus team admin’ privileges.
2. You can copy an existing Allplan project to Bimplus by selecting ‘Copy to’. You can then share this project with other project partners. This does not affect the source project.
3. You can move an existing Allplan project to Bimplus by selecting ‘Move to’. This moves the source project to Bimplus. As a result, this project is no longer available on the local computer or local network.
5) Managing users and assigning users to the project
Allplan Share is a cloud-based solution. Therefore, Allplan Share uses the Bimplus user management for project collaboration. As a result, Allplan Share is independent of local user management systems like Workgroup Manager.
After you have copied or moved an existing Allplan project to Bimplus, you must reassign the users to this project. Otherwise, they cannot access this project.
To define the project members, use the Bimplus project administration. In addition, you must invite new project members to the Bimplus project.
If these Bimplus project members are to use the Allplan Share option too, you must assign an Allplan Share license to each member in advance (as described in ‘3) Assigning licenses’).
How can Allplan be operated under a QHD / UHD / 4K resolution?
Starting with Allplan 2018, a query will appear in the Allplan Start under a QHD / UHD / 4K resolution (from 2560 x 1600), in which you can decide whether the operating system scaling should also be used in Allplan. This choice can be changed at any time in the Allplan Options-> Desktop Enviroment- > Display-> Scaling of the user interface.
If this option is switched on, Allplan uses the scaling level, which is set globally in the display settings of the operating system. Side effects of this scaling can be slight blurring in the symbols, drawing elements, and dropped graphics in Allplan.
Please note that this functionality is only available from Windows 8.1 and higher.
How can I make several projects available to users when Workgroup Manager is installed?
You can make several projects available to a user or define a user as the project owner of several projects.
Do the following:
First, log in as the Allplan administrator.
If necessary, set up an Allplan user for the new Windows user: Services application -> Workgroup Manager -> Configuration -> Add a user
(Allplan 2014 and later:Services application -> Workgroup Manager ->Administer users)
Start Allplan and then ProjectPilot by clicking
File -> ProjectPilot
Open the Projects folder in the area on the left.
You can see all the projects in the Contents of "Projects" area on the right.
a. Making several projects available to users:
In the area on the right, select the projects to which you want to add users or from which you want to remove users (CTRL or SHIFT key or use a selection rectangle).
Click one of the selected projects with the mouse button. On the shortcut menu, click
Add / remove authorized users...
The Add / Remove Authorized Usersdialog box opens.
Select the users you want to add to or remove from the selected projects.
The user list displayed only helps you select users. It does not list all the authorized users currently assigned to projects.
Click Addor Remove.
This adds or removes the selected users to or from the selected projects. Whether users you have already added to a project are added again is irrelevant. The same applies if you remove users you have never added to a project.
b. Defining a project owner for several projects
In the area on the right, select the projects for which you want to define the owner (CTRL or SHIFT key).
Click one of the selected projects with the mouse button. On the shortcut menu, click
Change project owner...
The Define Owner dialog box opens.
Select the user you want to define as the owner of the selected projects.
Note: The user list displayed helps you select users. You can define only one user as the owner.
c. Defining a project owner for a project or making a project available to several users(also applies to earlier versions):
In ProjectPilot in the area on the right, click the relevant project with the right mouse button. On the shortcut menu, click Properties.
The Properties for <project name>dialog box opens. Switch to the Security tab and define the owner and the authorized users.
You can add or remove project users or define the project owner only if the projects in question are in the current Allplan format.
You would like to know which colleague has borrowed a license from the license server and for what period of time it was borrowed?
Please make sure that at least Codemeter version 6.60b is installed on the license server.
To do so, start the CodeMeter Control Center on the server
Either in the Windows Start menu via CodeMeter -> CodeMeter Control Center. Or enter Codemeter in the search bar of the start page and press ENTER. Under Help-> About you can see the installed Codemeter version. If a version lower than 6.60b appears here, install the latest version of the Control Center released by Allplan. Instructions on how to do this can be found at the following link https://connect.allplan.com/de/faqid/20160113131406.html
The administration of the license server is done via the CodeMeter WebAdmin application on the server itself.
Start the CodeMeter Control Center at the license server on the server
Either in the Windows Start menu via CodeMeter -> CodeMeter Control Center. Or in the search bar of the start page enter Codemeter
and press ENTER, then click WebAdmin in the dialog box at the bottom right.
Type Localhost:22350 in the address bar of your browser.
In WebAdmin go to Container -> All Containers -> here select your Allplan Cm6 in which your license/s have been stored -> select the desired license by clicking on the Product Code 999 in front of it. -> Now scroll down to the end, to the License Transfer History area.
Here you can see exactly when the license was borrowed, for how long and by which user.
If you want to see which users are currently in the network pulling licenses from the license server, you can also see this. To do this, go to License Monitor-> Sessions in WebAdmin.
Borrowed licenses are currently only displayed with the container number under License Monitor-> Sessions, only under License Transfer History the user is also visible.
Since under License Transfer History it is a complete history, all license loans are listed, even those that have already been terminated, i.e. the license has been returned to the license server in the meantime.
Can I "automate" the installation of Allplan?
You can install Allplan 2017 in silent mode. This installation mode is fully automatic; you do not need to enter anything. Silent installation is particularly useful if you want to install Allplan 2017 with the same settings on a large number of workstations on a network.
Requirements for installing in silent mode:
Pay attention to the different licensing types!
Licensing for stand-alone workstations:
Make sure you have not yet activated a license on the computer where you want to record silent installation. Use the Viewer option for recording.
After having installed all computers in silent mode, you must use the Product Key to activate the license locally on each computer.
To activate the license after installation:
- Open the 'License settings' dialog box: Services application -> Utilities -> License settings
- Click License activationon the left.
- Enter your Product Key.
- Click Activate license.
Using a license server:
- The clients take the licenses from a license server.
- The license server is installed.
- The license of the license server is activated.
For more information on the license server, go to https://connect.allplan.com/en/faqid/20150618084450.html
Use the Use active licenseoption for recording.
Setup writes the license settings to the %AppData%\Nemetschek\Lic3.ini file.You must distribute this file to all computers.
Some more tips:
- Before you start installing, unzip the Allplan installation package (for example, using the 7_Zip program). Make sure this package is in a folder that can be accessed by all clients you want to install.
- Start the command prompt for running the setup program always as a local administrator. To do this, open the shortcut menu and select "Run as administrator". Make sure you always start the command prompt from the correct folder.
- Setup will automatically install any Microsoft components required by Allplan such as Microsoft .NET-Framework or Microsoft Report Viewer without prompting you to confirm.
Preparing to install in silent mode
To record and run silent installation, you need the installation files of Allplan 2017.
Installing in silent mode involves three steps:
Creating the log file for installing in silent mode
Start by installing Allplan 2017 with the /r option on a typical workstation. During installation, Setup automatically writes all entries to a log file named setup.iss. You can then use this file to install the program on the other workstations.
Installing in silent mode
Next, install Allplan 2017 with the /s option on all other workstations. Installation is based on the setup.iss log file you created in the first step.
Checking the installation
Finally, you should check the setup.log file, which was created automatically during setup, to see whether everything was installed correctly.
Note: When installing in silent mode, Setup usually uses the same setup.iss file to install the program on all workstations. However, you can edit some settings of the setup.iss file if you want to adjust paths. You can find more information in the help; see Adjusting the setup.iss filehttp://help.allplan.com/Allplan/2017-0/1031/Allplan/index.htm#331.htm
To install Allplan in silent mode, do the following:
Install .NET 4.6
Silent setup requires you to install .NET 4.6 in advance. The reason for this is that you have to reboot the computer after installation of .NET 4.6. This reboot would interrupt silent installation.
After you have downloaded the installation files, you must unzip these files before you can use them to install in silent mode.
- Unzip the zip file downloaded. This results in an .exe file (for example, Allplan 2017-0-5-cad.exe).
- Then unzip this .exe file using an appropriate program (for example, 7_Zip) and save the resulting file to any folder. You can now use the command prompt to start Setup.exe for recording.
1. Sample installation:
Start by creating a record file. To do this, run setup with the settings you need. You only need to do this once.
Use the command prompt to start this installation with the "/r" option (for record):
To run the setup program, open the command prompt as a local administrator and type the following:
Setup starts and runs as usual.
When you are prompted to choose the license configuration, select the Use vieweroption.
When you are prompted to choose the license configuration, select the Use active licenseoption.
Setup logs the entire installation process, writing everything to the setup.iss file.
If you want, you can change the name and folder of this file:
setup.exe /r /f1<folder>:\Setup.iss
setup.exe /r /f1c:\Setup.iss
This saves the file directly to C:\.
There must not be any blanks between "f1" and the folder!
Copy the setup.iss file to a folder that can be accessed by all clients you want to install. It is a good idea to copy this file to the folder with the Allplan installation files.
Copy the %AppData%\Nemetschek\Lic3.inifile to the %AppData%\Nemetschek folder of every client.
If you install Allplan on a client for the first time, you must create the Nemetschek folder in %AppData% first (for example, C:\Users\Username\Appdata\Roaming\Nemetschek).
2. Silent installation:
Make sure you can access the setup.iss file.
Make sure the Lic3.ini file is in the %AppData%\Nemetschek\ folder.
Setup logs the entire installation process again, writing everything to the setup.log file. You can find this file in the same folder as the setup.iss file. With the /f2 option, you can specify a different folder and file name for the setup.log file.
To start installing Allplan in silent mode on a client, open command prompt as a local administrator and type the following:
setup.exe /s /f1<folder>:\Setup.iss /f2<folder>:\Setup.log
setup.exe /s /f1c:\Setup.iss /f2c:\Setup.log
This saves the file directly to C:\.
Check the setup.log file to see whether everything has been installed correctly. The [ResponseResult] section should return the 'ResultCode=0' value.
If you have several licenses or license servers, select the required license for each client using the Services application - Utilities - License settings.
Refer to the online help for detailed information on installing in silent mode.
To open the help system, press the F1 key during setup. Go to the "Contents" tab, select "Installing" and then "Installing in silent mode".
You can also find information in the help for the license settings:
Services application -> Utilities -> License settings
To open the help system, press the F1 key. Go to the "Contents" tab, select "Licensing Allplan using a license server" and then "Installing in silent mode".
Please note that we cannot provide support for this installation method.
How can I give individual users the right to see and select specific seats on the license server? And how can I deny users this right?
Sometimes, it may be necessary that a specific user does not see the seat with, for example, the terrain option so that this user cannot use this seat inadvertently.
Using WebAdmin, you can give users rights for specific seats on the license server.
Please note the following points:
1. Before you start, check that at least CodeMeter Version 6.50 is installed on the license server.
Start CodeMeter Control Centeron the server.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen. Enter Codemeter and press ENTER. Select Help -> About to see which version of CodeMeter is installed. If the version displayed is older than version 6.50, you must install the latest version of CodeMeter Control Center. Go to the following website
and download the CodeMeter User Runtime for Windowsprogram.
2. Open WebAdmin. Start CodeMeter Control Centeron the server again.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen, enter Codemeter and press ENTER. A dialog box opens. Click WebAdminat bottom right.
Enter Localhost:22350in the address bar of your browser.
3. Go to "Configuration -> Server -> License Access Permissions".
Select Mode: Advanced.
4. Go to "Advanced Mode Configuration -> Specific access rules -> Add Firm Code"and select "6000100 - Allplan GmbH". Click Add. "Specific access rules"now inlcude "6000100 - Allplan GmbH".
5. Click "Add Product Code"to select the seat for which you want to define access rights. However, this is only possible if the "Distinction based on Product Item Text" check box is selected.
The "Note" section below in this FAQ lists the abbreviations given at the end of each seat. These abbreviations represent the license contents.
Select the required seat and click "Add" again. Repeat these steps to assign more seats.
6. After having defined the product code, you can now assign an access rule.
By default, all users are allowedto access this seat.
Select the product code you just defined and click "Add new access rule".
Click "User" and enter the required user.
When you click in the field next to "User", you can see all available users with their domain names.
Select the user or enter the user manually. For example, enter DOMAINNAME\SSample and select the right you want to assign to this user by clicking "Allow" or "Deny".
If the default setting is "Allow", you can thus deny users access to the license. If the default setting is "Deny", you can thus allow users to access the license again.
You can add more rules. When you have configured all rules, click "Apply" to apply the changes.
7. You need to restart CodeMeter Service so that the changes take effect.
To do this, select CodeMeter Control Center -> Process -> Stop CodeMeterServiceand then click Restart CodeMeter Service.Before you restart the service, make sure all users have closed Allplan.
Client access can be defined by one of the following parameters: computer name, IPv4 subnet, user name or group name.
Enter the required parameter in the corresponding field. If you use an active directory, the program auto-completes entries in the "User" and "Group" fields.
Here comes a practical example:
Think about which setting is most useful to you. For example, you have two seats: seat 01 with 7 architecture licenses and seat 02 with 1 architecture license and 1 terrain license. Only two specific users should be able to use seat 02. If you want to deny all other users access to seat 02, you need to add seat 02 to specific access rules and define a rule for this seat 02. First, set the default setting to "Deny". Then, add these two users and select or "Allow" for these users. As a result, all other users can only see seat 01 and these two users can see seats 01 and 02.
However, if you want that these two users can only see seat 02, you need to add both seats to specific access rules and define a second rule for seat 01. Add these two users to this second role and select Deny for these two users. The default setting, which applies to all the other users, is still Allow. As a result, all other users can see seat 01 and these two users can only see seat 02.
The following abbreviations are used:
K Key Plan
M Bridge Modeler
L Cadastral plans for conduits
S Language option
A Architecture option
E Engineering option
Here are some examples:
"Allplan Architecture 2017”
Architecture + Terrain
"Allplan Architecture 2017 T"
Architecture + Bridge Modeler
"Allplan Architecture 2017 M"
Architecture + Terrain + Bridge Modeler
"Allplan Architecture 2017 TM"
How can I copy bar reinforcement including views and sections created with the tools in the "Associative Views" module if, for example, I want to use slab reinforcement for another floor?
I want to place the copied reinforcement and the views in new, separate drawing files and then adjust the reinforcement, keeping the layout of the copied sections. Only the changes in the copied reinforcement should automatically be added to the sections.
First, open ProjectPilot (File -> ProjectPilot) and copy the drawing files with the reinforcement and the drawing file with the associative views and sections to new drawing files. ProjectPilot asks you whether you want to copy the linked drawing files as well. Click No.
If there are views or sections containing only data you do not want to move (for example, only model data), select Create -> Engineering Views, Details -> Associative Views -> Add to Viewand add the data you want to move (for example, reinforcement) to these views or sections. You can remove the data later.
The copied drawing files still reference the original drawing files. The next step is to delete those references.
To do this, open the drawing files you just copied. Select Change -> Engineering Views, Details -> Associative Views -> Manage Reference Drawing Filesand remove the references to the source drawing files.
When you have removed all links to drawing files you do not want to move, select the new drawing files with the views and the reinforcement.
Select all data by pressing <CTRL>+A and move the data as you need.
You can move the data in the X, Y and Z directions in plan or define any spatial displacement in isometric view.
You can then add the associated model data to the views and adjust the reinforcement.
Once deleted, you cannot restore any references to drawing files. Therefore, make sure you delete the right references. Allplan deletes empty views or sections automatically.