Question:

My computer does not have Internet access, but I would like to activate the license with the Product Key. What can I do?


Information:

The easiest way to activate and return Allplan licenses is to do this online. In other words, the computer has Internet access. However, you can also activate Allplan on a computer without Internet access (offline licensing). Offline licensing is particularly useful if some Allplan computers in your office do not have Internet access and do not use a license server either.

If the computer without Internet access and the computer with Internet access are neither close to each other (for example, the computer in the office hasInternet access, but the computer at home does not haveInternet access) nor connected with each other (for example, using LAN), offline activation is not very suitable, as you have to access both the computer with Internet access and the computer without Internet access.

Requirements for activating a license offline:

• You have a valid Product Key.
• You have installed Allplan on the computer without Internet access (for example, as a viewer).
• You have another computer with Internet access.

Important: Activating a license offline involves two steps. In addition, you need to upload a receipt file so that you can return the license offline later.

There are the following basic steps:

• Creating and uploading the license request file
• Downloading and importing the license update file
• Creating and uploading the receipt file

The online computer uses the following web page:
http://lc.codemeter.com/59885/depot_151/index.phphttp://lc.codemeter.com/59885/depot/index.php


Note:

As both the license file and the receipt file are saved with the name of the container number by default, it may happen that you mix up these two files. Therefore we strongly recommend that you use meaningful names for the files. For example, the name could include the name of the computer and the Product Key or the words “license” and “receipt”.
This is particularly important if you want to activate several computers offline.


Answer:

A: Activating licenses offline

To activate licenses, use CodeMeter Control Center.

Start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. An an alternative, go to the Windows search box and type Codemeter.

You can find the container numbers in the ‘License’ area.
If you have a stand-alone license, the name of this container is Allplan GmbH and its number is 327XXXXXXX.

Select this container and click Activatelicense on the right. Select
Create license request. Create a *.WibuCmRaC file for your container.

Take this file to a computer that is online.
Go to the following web page:
http://lc.codemeter.com/59885/depot/index.php

Enter your Product Keyin the “Ticket” line and click Next. You can now see your license.
Click Activate license.

You can see your license and all available updates, which should be selected. Click Offline License Transferat the bottom on the right.

You can now upload the *.WibuCmRaC file (Browse....) by clicking Upload license request now. This creates your license, which you can download by clicking Download license update file now. Install this license on your computer.

To do this, go to CodeMeter Control Center and click File-> Importlicense.


You can see the activated license in the Services application -> Utilities -> License settingsand you can now use this license for Allplan.


Finally, upload the receipt file.
To do this, open CodeMeter Control Centeragain and select the new Allplan GmbH license with the number 128-XXXXXXX.

Then click License update -> Next -> Create receipt.
Create the receipt file for this container.
Upload this receipt file using the web page.

Take this file to the computer that is online. Click Nexton the web page.
If you have already closed the web page, use the link given above and enter your Product Key once again. Then select Continue with license transfer.
Select the receipt file and click Upload receipt now.
Click OKto confirm. This completes license activation.




B: Returning licenses offline

You can return licenses in the same way:
Start CodeMeter Control Center and select the container with the license (Allplan GmbH with the number 128-XXXXXXX). Then click License update -> Next -> Create license request.
Here, too, create a *.WibuCmRaC file for your container.

Take this file to a computer that is online.
Here, too, go to the following web page:
http://lc.codemeter.com/59885/depot/index.php

Enter your Product Keyin the “Ticket” line and click Next. You can now see your license.
Click Move license.
Click Offline License Transferat the bottom on the right.
You can now upload the *.WibuCmRaC file (Browse....) by clicking Upload request now.
Then click Download license update file now. Download the file and import it. To do this, go to CodeMeter Control Centerand click File -> Importlicense.

Then create a receipt by clicking License update -> Next -> Create receipt.
Upload this receipt file using the web page.
To do this, click Nexton the web page.
If you have already closed the web page, use the link given above and enter your Product Key once again. Then select Continue with license transfer.
Select the receipt file and click Upload receipt now.
Click OKto confirm. This completes license activation.

The license is now available again and can be used on another computer.

Question:

By starting Allplan or using a tool, we got an error message of Missing text, How to fix it?



Answer:

In the example below, we see 3100939 (means file 31 and line 939). The language file are stored in the ETC folder available by Service/Service/File Explorer/ETC

This can happen after an update using an hotfix or by using a new full version.

Depending on some right issue, it can happen that text file are not up to date after installing the hotfix. That leads to this error message. This doesn't block the use but can be annoying to have this message displayed all time.

To fix this, there is different possibilities:

1°) You can deinstall and reinstall the software with admin right to be sure all file will install properly

2°) You can use the tool Modify installation and repair the setup

3°) You can download the latest full version. First rename the folders ETC and install over the exiting one, this will replace the ETC folder by a new one.

4°) you can bring this a recent file from another workstation to your and by restarting Allplan, this should fix this message. (but you maybe miss other file or content)



Note :

If you use a multi-country installation, please check the ETC for each country (sometimes you will find ETC.Fra, ETC.Bel...) 

If you use a WIP version, this can be normal because the base devellopement is done in English-German and other language are added on a second step closed to the release.

If you have this message on a standard release installation with admin right, than please inform the support to analyze it more in detail.

Question:

How is a silent installation of Allplan from version 2024 carried out?

Answer:

Allplan has been installed using the Windows Installer since version 2022.
The Windows Installer has a number of advantages such as repairability and providing installation on a network. Allplan can also be installed unattended (“quiet”) using the Windows Installer.

Please note that no individual support can be provided for this procedure.
If you are unsure, ideally have your IT service provider or administrator carry out these instructions.

The following steps are necessary:

1. Edit the settings file
The settings file attached to this FAQ must be edited in advance in order to select the desired program components.
Here is a description of the structure of the settings.txt file:

· Installation options:
Set the desired installation option:

New installation:
No data is transferred from the most current previous version.
Value to be entered:
Upgrade=Upgrade.UpgradeNew
 
New installation with data copy:
Allplan is installed parallel to the previous version and the data (with the exception of the projects) is copied. Projects can be transferred to Allplan itself after the installation has been completed.
Value to be entered:
Upgrade=Upgrade.UpgradeKeep
 
Upgrade:
The latest available Allplan version will be converted into the current version.
Upgrade=Upgrade.Upgrade
 
· Paths:
Enter the desired program folder under "InstallPath" and the desired central file storage folder for Allplan under "CentralPath",
When storing data in a network, be sure to use the CentralPath in UNC notation.

Example:
InstallPath=C:\Program Files\Nemetschek\Allplan_2024
CentralPath=\\SERVER\CAD_Daten\Allplan\Allplan_2024

Important:
In the case of an upgrade, be sure to specify the path of the previous version for "CentralPath".


· Countries and languages:
Select the countries and languages to install from the list of suggestions in the file.
Set the main country with "DefaultCountry" and the main language of the installation with "DefaultLanguage".
Add additional countries and/or languages if desired.
Wichtig: For a functional installation, the main country and language must be specified.

Example:
# Country list: AUS AUT BEL BRA BUL CAN CHN DEU ENG FRA GRC HOL HRV ITA JPN KOR POL PRT RUM RUS SLK SPA SVN SWI TCH TRK UNG USA VNM YUG
# Language list: BUL CHN DEU ENG FRA GRC HOL HRV ITA JPN POL PRT RUM RUS SER SLK SPA SVN TCH TRK UNG VIE
DefaultCountry=DEU
DefaultLanguage=DEU
Country.ITA
Language.ITA
Language.ENG

· Advanced features:
Select the features or data you want to install from the list of suggestions in the file.

Example:
# Feature list: ProgramFiles AutoCon Desktop HelpFiles TextureFiles
Feature.ProgramFiles
Feature.AutoCon
Feature.Desktop
Feature.HelpFiles
Feature.TextureFiles
Feature.Demos

· Manufacturer-specific user data:
From the suggestion list in the file, select the user data (product catalogs for reinforcement or formwork catalogs) that should be installed.

Example:
# Vendor list: Ancon Ancotech Armaturis Lindab BarSplice Coupler DaytonSuperior Bartec Rolltec Erico Filigran Halfendeha Halfenhbs Hrc Line Register Peikko Philipp Reidbar Sah Schoeck Splice
Vendor.Ancon
Vendor.Ancotech
Vendor.Armaturis
Vendor.Lindab
Vendor.BarSplice
Vendor.Coupler
Vendor.DaytonSuperior
Vendor.Bartec
Vendor.Rolltec
Vendor.Erico
Vendor.Filigran
Vendor.Halfendeha
Vendor.Halfenhbs
Vendor.Hrc
Vendor.Leitungskataster
Vendor.Peikko
Vendor.Philipp
Vendor.Reidbar
Vendor.Sah
Vendor.Schoeck
Vendor.Splice

# Formwork: Meva1
Formwork.Meva1

2. Storage of the installation and the settings file on a share (optional)
In order to be able to roll out the Allplan installation efficiently on all computers, it is recommended to store both the Allplan setup and the settings file on a share in the network to which all relevant computers have access. See also the note on the full setup at the end of the FAQ.

3. Choice of installation option
You can choose between the following installation options:

· Quiet Installation: Installation takes place without user input being necessary.
· Passive installation: Installation takes place with reduced user input.

4. Installation
The installation is started in the unpacked 'Allplan' folder using the file 'Allplan_Installer.exe' using the following command line entries:

· For quiet installation:
Allplan_installer.exe /Settings <path to the settings file> /quiet

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /quiet

· For passive installation:
Allplan_Installer.exe /Settings <path to the settings file> /passive

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /passive
 
5. Modify the installation
It is also possible to modify the installation.
To do this, edit the settings file for the desired additional or components to be removed. Call the setup with the following parameters:

· For quiet installation:
Allplan_Installer.exe /Settings <path to the settings file> /quiet /modify

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /quiet /modify

· For passive installation:
Allplan_Installer.exe /Settings <path to the settings file> /passive /modify

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /passive /modify
 
6. Repair of the installation
It is also possible to repair the installation.
Call the setup with the following parameters:

· For quiet installation:
Allplan_Installer.exe /Settings <path to the settings file> /quiet /repair

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /quiet /repair

· For passive installation:
Allplan_Installer.exe /Settings <path to the settings file> /passive /modify

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /passive /repair
 
7. Uninstall
Uninstallation can also be done via passive or quiet installation.
 
Rufen Sie das Setup mit folgenden Parametern auf:
 
· For quiet installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /quiet /uninstall
 
Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /quiet /uninstall
 
· For passive installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /passive /uninstall
 
Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /passive /uninstall


HInt:
Of course, in the silent setup, the name of "Allplan_Installer.exe" must be adapted to the name that matches the version (e.g. Allplan_2023_0_4_Installer.exe).


Note on downloading the full setup from version 2023:
From version 2023 onwards, Allplan is installed using a minimal installer, which only downloads those components that are actually required for the installation.
If, for example, the complete installation package with all optional components is required to roll out the setup, it can be downloaded using the layout mode, which is described in the following FAQ.

https://connect.allplan.com/de/faqid/sc-000007942.html

 
Note on licensing:
Since there is no longer a license query in Allplan Setup from version 2022, this information cannot be provided. If a license server is in use, it can be set up on a computer and then distributed using the following procedure.

https://connect.allplan.com/de/faqid/sc-000007100.html

Question:

How can I switch Allplan from German to English?



Answer:

Allplan 2018 is the first version to include English in the license by default.
This means that by installing Allplan 2018, you automatically install the English version too.
As a result, you can switch languages using the Services application.

Important! This switch only applies to the program itself.
The content of the defaults (standards and country-specific content) does not change and is still in German.

Before starting Allplan, you can select the language using the Services application.
To do this, select Configuration -> Language. ‘Current setting’ shows the language currently selected.
Select the required language in the area at the bottom, that is, English.
A German default license only includes German and English.





Allplan now starts in English.



Note:

If English is not included in the Services application, you can install this language (or other languages you purchased) at any time.

All you need to do is download the current installation package of the version you use. You can find this package at www.connect.allplan.com

During installation, select Update installationand Use active license.

Select Customfor the Setup type.

When it comes to selecting Features, select the required language(s) in the ‘Language packages’ area.
This area lists the languages included in your license.
Do not change the other settings and click ‘Next’ to confirm the following dialog boxes.




After installation, start the Services application-> Configuration -> Language. Select the required language.

Question:

During installation I get an error message saying that SetupSchedTaks.exe does not work anymore.

When I try to start Allplan or the Services application, the following message appears:
The program cannot start; api-ms-win-crt-runtime-l1-1-0.dll is missing.



Answer:

This problem is caused by missing DLl files, which are required by Allplan. These DLL files usually come with the operating system. You will only see these messages if the operating system is not up-to-date. These messages are not caused by Allplan.
Instead, this problem is caused by the KB2999226 or KB2918614 (Universal CRT) Windows updates, which contain parts of Visual C++ Redistributable for Visual Studio 2015. Sometimes you cannot install these updates or they are defective.

If you have not yet installed these updates, install them now. In addition, install all available updates.

If you have already installed these two updates, try to install them again.
If the operating system is configured to automatically install Windows updates, some clients report errors during installation of the KB2918614 or KB29992226 package. These errors are caused by Windows, which blocks installation of files of the Visual Redistributable 2015 package. In this case, you must uninstall or delete the updates. After this, try to install the updates again.


If you cannot install the updates, do the following:
1. Deactivate automatic updates
2. Start -> Control Panel -> Windows Update -> change the settings -> never check for updates
3. Restart the computer
4. Download and install missing updates
5. Activate automatic Windows updates again


If you still cannot install the updates, run Windows diagnostics to check your system for update problems.

You can also install the updates manually. Use the following links:

KB2918614:
https://www.microsoft.com/de-DE/download/details.aspx?id=43759

KB2999226:
https://www.microsoft.com/de-de/download/details.aspx?id=49093


Try this if you still cannot install the updates:
https://www.smartftp.com/support/kb/the-program-cant-start-because-api-ms-win-crt-runtime-l1-1-0dll-is-missing-f2702.html



Note:

Regarding this error message, we cannot fix anything on the part of Allplan. These DLL files, which are required by Allplan, are an integral part of the Windows operating system.

Question:

Can I "automate" the installation of Allplan?


Answer:

You can install Allplan 2017 in silent mode. This installation mode is fully automatic; you do not need to enter anything. Silent installation is particularly useful if you want to install Allplan 2017 with the same settings on a large number of workstations on a network.

Requirements for installing in silent mode:

Pay attention to the different licensing types!

Licensing for stand-alone workstations:
Make sure you have not yet activated a license on the computer where you want to record silent installation. Use the Viewer option for recording.

After having installed all computers in silent mode, you must use the Product Key to activate the license locally on each computer.
To activate the license after installation:

• Open the 'License settings' dialog box: Services application -> Utilities -> License settings
• Click License activationon the left.
• Enter your Product Key.
• Click Activate license.
  

Using a license server:

• The clients take the licenses from a license server.
• The license server is installed.
• The license of the license server is activated.

For more information on the license server, go to http://connect.allplan.com/de/support/loesungen.html?tx_nemsolution_pi1%5BdokID%5D=20161115093205.htmlhttps://connect.allplan.com/en/faqid/20150618084450.html
Use the Use active licenseoption for recording.

Setup writes the license settings to the %AppData%\Nemetschek\Lic3.ini file.You must distribute this file to all computers.


Some more tips:

• Before you start installing, unzip the Allplan installation package (for example, using the 7_Zip program). Make sure this package is in a folder that can be accessed by all clients you want to install.
• Start the command prompt for running the setup program always as a local administrator. To do this, open the shortcut menu and select "Run as administrator". Make sure you always start the command prompt from the correct folder.
• Setup will automatically install any Microsoft components required by Allplan such as Microsoft .NET-Framework or Microsoft Report Viewer without prompting you to confirm.

Preparing to install in silent mode

To record and run silent installation, you need the installation files of Allplan 2017.
Installing in silent mode involves three steps:

Creating the log file for installing in silent mode

Start by installing Allplan 2017 with the /r option on a typical workstation. During installation, Setup automatically writes all entries to a log file named setup.iss. You can then use this file to install the program on the other workstations.

Installing in silent mode

Next, install Allplan 2017 with the /s option on all other workstations. Installation is based on the setup.iss log file you created in the first step.

Checking the installation

Finally, you should check the setup.log file, which was created automatically during setup, to see whether everything was installed correctly.

Note: When installing in silent mode, Setup usually uses the same setup.iss file to install the program on all workstations. However, you can edit some settings of the setup.iss file if you want to adjust paths. You can find more information in the help; see Adjusting the setup.iss filehttp://help.allplan.com/Allplan/2017-0/1031/Allplan/index.htm#331.htm


To install Allplan in silent mode, do the following:

Install .NET 4.6
Silent setup requires you to install .NET 4.6 in advance. The reason for this is that you have to reboot the computer after installation of .NET 4.6. This reboot would interrupt silent installation.


After you have downloaded the installation files, you must unzip these files before you can use them to install in silent mode.

• Unzip the zip file downloaded. This results in an .exe file (for example, Allplan 2017-0-5-cad.exe).
• Then unzip this .exe file using an appropriate program (for example, 7_Zip) and save the resulting file to any folder. You can now use the command prompt to start Setup.exe for recording.

1. Sample installation:
Start by creating a record file. To do this, run setup with the settings you need. You only need to do this once.

Use the command prompt to start this installation with the "/r" option (for record):

To run the setup program, open the command prompt as a local administrator and type the following:
setup.exe /r

Setup starts and runs as usual.

Stand-alone license:
When you are prompted to choose the license configuration, select the Use vieweroption.
License server:
When you are prompted to choose the license configuration, select the Use active licenseoption.


Setup logs the entire installation process, writing everything to the setup.iss file.

If you want, you can change the name and folder of this file:

setup.exe /r /f1<folder>:\Setup.iss
For example,
setup.exe /r /f1c:\Setup.iss
This saves the file directly to C:\.

Be careful:
There must not be any blanks between "f1" and the folder!

Copy the setup.iss file to a folder that can be accessed by all clients you want to install. It is a good idea to copy this file to the folder with the Allplan installation files.

License server:
Copy the %AppData%\Nemetschek\Lic3.inifile to the %AppData%\Nemetschek folder of every client.
If you install Allplan on a client for the first time, you must create the Nemetschek folder in %AppData% first (for example, C:\Users\Username\Appdata\Roaming\Nemetschek).


2. Silent installation:
Make sure you can access the setup.iss file.

License server:
Make sure the Lic3.ini file is in the %AppData%\Nemetschek\ folder.


Setup logs the entire installation process again, writing everything to the setup.log file. You can find this file in the same folder as the setup.iss file. With the /f2 option, you can specify a different folder and file name for the setup.log file.

To start installing Allplan in silent mode on a client, open command prompt as a local administrator and type the following:

setup.exe /s /f1<folder>:\Setup.iss /f2<folder>:\Setup.log

For example,
setup.exe /s /f1c:\Setup.iss /f2c:\Setup.log
This saves the file directly to C:\.

Check the setup.log file to see whether everything has been installed correctly. The [ResponseResult] section should return the 'ResultCode=0' value.



Note:

If you have several licenses or license servers, select the required license for each client using the Services application - Utilities - License settings.

Refer to the online help for detailed information on installing in silent mode.
http://help.allplan.com/Allplan/2017-0/1031/Allplan/index.htm#321.htm
To open the help system, press the F1 key during setup. Go to the "Contents" tab, select "Installing" and then "Installing in silent mode".

You can also find information in the help for the license settings:
Services application -> Utilities -> License settings
To open the help system, press the F1 key. Go to the "Contents" tab, select "Licensing Allplan using a license server" and then "Installing in silent mode".


Please note that we cannot provide support for this installation method.

Question:

What can I do if Allplan does not start?


Answer:


Work through the following steps:

Step 1 - run as administrator
Start Allplan with the ‘Run as administrator’ option.
To do this, right-click the Allplan icon and click ‘Run as administrator’.
If Allplan does not start, go to step 2.

Step 2 - cleanup
Allplan is not running. Start the Services application and do the following:
Services application -> Service -> Hotline Tools -> cleanup -> OK
If Allplan does not start, go to step 3.

Step 3 - cleanstd
Allplan is not running. Start the Services application and do the following:
Services application -> Service -> Hotline Tools -> cleanstd: reset CAD defaults -> OK -> OK -> Yes -> OK
If Allplan does not start, restore the settings:
Services application -> Service -> Hotline Tools -> laststd: restore the last settings -> OK -> OK -> Yes -> OK
Go to step 4.

Step 4 - cleanreg
Allplan is not running. Start the Services application and do the following:
Services application -> Service -> Hotline Tools -> cleanreg: reset CAD registry settings -> OK -> OK -> Yes -> OK
If Allplan does not start, restore the registry settings:
Services application -> Service -> Hotline Tools -> lastreg:restore most recent CAD registry settings -> OK -> OK -> Yes -> OK
Go to step 5.

Step 5 (Allplan 2016 and later)
Restart the Wibu service:
Start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen and enter Codemeter.

CodeMeter Control Center -> Process -> Start CodeMeter Service
If the service is running, stop it and restart it.

If Allplan does not start, go to step 6.

Step 6 (Allplan 2016 and later)
Go to the Wibu website and install CodeMeter User Runtime Version for Windows (64-bit version).
You can find the installation program at https://www.wibu.com/de/anwendersoftware.htmlor on the Nemetschek FTP server ftp://nemhotline:ha37jvg8f@ftp.nemetschek.deat download/General/Wibu/CodemeterRuntime.exe

Start the ‘CodeMeterRuntime.exe’ file.
To do this, right-click this file and select
‘Run as administrator’.
Confirm all messages displayed and the defaults by clicking ‘Next’.
CodeMeter Control Center will be installed afterwards.
If Allplan does not start, go to step 7.

Step 7 - contact Technical Support
Send the following information by email to support.de@allplan.com:

1. An exact description of the last step before the error or crash occurred.
2. The error message itself (as a screenshot). To find out how to take a screenshot, look at
   https://connect.allplan.com/en/faqid/0001cb36.html
3. A support request (Hotinfo) with question 01. To find out how to create a support request, look at
   https://connect.allplan.com/en/faqid/20140528094911.html
4. The 'Allplan.out' log file. To find out how to create a support request, look at
   https://connect.allplan.com/en/faqid/0001a27a.html
5. Allplan 2016 and later -> a screenshot of the Wibu Control Center. To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen and enter Codemeter.
   

We will contact you.

Question:

Allplan crashes when you open the Wall dialog - what can you do?



Answer:

Since Allplan version 2020, you can also use OpenGL in Allplan if you use an onboard graphics card. Provided this card supports the OpenGL version listed in the system requirements:

System requirements Allplan 2020

In connection with outdated grafic card drivers and current Windows updates, the described crashes may occur in individual cases.

In this case, please update the drivers of your graphics card(s) first by downloading the appropriate driver from the manufacturer's homepage and then installing it:

https://www.amd.com/de/supporthttps://www.intel.de/content/www/de/de/support/articles/000005517/graphics-drivers.htmlAMD grafics driver
Intel grafics driver
https://www.nvidia.de/Download/index.aspx?lang=deNVIDIA grafics driver

Important: please do not use the Update Driver button in the Device Manager.

If the problem is not solved after the driver update, please contact your Allplan support.

Question:

Where can I find out about system requirements and the system test tool for Allplan 2014 or Allplan BCM 2014?



Answer:

Follow the link to get detailed information on the following topics:

- System test
- System requirements
- Graphics cards
- Large-format printers

https://www.allplan.com/info/sys2014

https://www.allplan.com/services/cad-software-support/downloads.html

https://www.allplan.com/services/cad-software-support/grafikkarten.html

https://www.allplan.com/services/cad-software-support/grossformatdrucker.html

Question:

During installation of license server the message appears 'installation failed'. What could be the reason for it?



Answer:

Check the following points:

• The license server must be installed in a 64 bit windows system. License server is not working on 32 bit system.
  
• Make sure the license server setup is saved local on the machine and is not executed over network
  
• Stop the real time check of your virus scanner or stop the virus scanner complete during installation. Optionally stop the firewall as well - attention in most cases you have to reboot the server in order to take over the settings.
  
• Run the *.exe file over context menu -> run as administrator.
  
• If the license server installation still fails. The reason could be NET framework. License server uses NET framework 4.6 and in newer version 4.7. If there are components missing the setup will automatically try to install them. This happens in the background. It will be connected to webpage of Microsoft http://go.microsoft.com/fwlink/?LinkId=397708 and the missing files will be downloaded and installed. If a proxy server is blocking this page the download cannot happen and the license server installation fails. In these cases you will have to configure the proxy server settings to allow the Microsoft URL. Microsoft URL has to be trustworthy. Start installation of license server again.
  

Addition for license server 2017 on older sever like 2008 R2 server:

If the license server installation still fails and the setup stays at 50%, then the reason is usually .NET framework.
Try to install the .NET version in advance from Microsoft Download.

Installation of. NET framework 4.6 requires at least Windows Server 2008 R2 with SP 1.
For information, also see the following link: https://www.microsoft.com/de-de/download/details.aspx?id=49982

If the installation of the new version keeps failing, try to install a slightly older license server.
It will works the same way with ALLPLAN 2017 but still is operating with .NET 4.5.2.
Use the following link:
ftp://nemhotline: ha37jvg8f @ftp.nemetschek.de/download/Allgemein/Archiv/WiBu/Lizenzserver
Download the License server until 2017-0.

Note:

After successfully installation of license server you will have to connect via internet again in order to activate the license. If using proxy allow the access of the following URLs as well.

https://lc.codemeter.com/59885/gateways/getLicenses.php

https://lc.codemeter.com/59885/gateways/getTicketInformation.php

Question:

An error occurs during installation of hotfix 2015-1-11 or later. What can I do?



Answer:

To install this and future Allplan 2015 hotfixes using auto-update, you must update the installation service. Requirement: Allplan 2015-1-10 is installed.

1. You can find a batch file attached to this FAQ. Save and extract this file and execute it on every Allplan workstation (right-click this file -> select "Run as administrator" on the shortcut menu...). The batch file looks for the "InstallAULService.exe" file in the local PRG folder of the Allplan installation and runs it as the administrator. This updates the installation service.
Be careful: this requires administrator privileges.

If your e-mail program blocks this file, you can also download it from our FTP server.
Enter the following address in WindowsExplorer (do not use Internet Explorer!):

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/2015/Hotfix/2015-1/UpdAUL.bat


2. Auto-update should now work as usual.



Note:


As an alternative, you can also install the full version of Allplan 1/12/2015. This also updates the installation service.
You can download the full version fromhttps://connect.allplan.com/deor from our FTP server:

To access our FTP server, you require a current Windows operating system. Do the following:
Enter the following address in Windows Explorer (do not use Internet Explorer!):

ftp://hotadmin@ftp.entw.nemetschek.de/download/Allplan/2015/CD/DoWn-allplan2015-1-11-cad.zipftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/2015/CD/DoWn-allplan2015-1-12-cad.zip

Download the corresponding ZIP file and extract it. Right-click the exe file and start it using "Run as administrator".
Install the update.

Question:

How can manufacturer catalogue data be installed or updated retrospectively?



Answer:

To install or update manufacturer catalogue data, such as the reinforcement connections from ERICO-Lenton, at a later date, please proceed as follows:

Firstly, you need the latest installation package for your version
You can find this either on Allplan Connect (www.connect.allplan.com), or from our webdrive at

https://webdrive.allplan.com/s/4LrjrymoxESzC6p

The installation packages can be found under
Allplan/"Version"/Installation package

(Click on the three dots to the right of the file size and select Download)

Note: Do not download all files (that's about 450GB!), but only the installation package for the version you need.

Copy the zip file to your local computer.


1. please open your STD directory of the central file storage via the Allmenu of the Allplan version to be updated.




2. please close all running Allplan applications and the Allmenu in the company again

3. rename the Prod subdirectory in the STD directory you have just opened to Prod_old

4. now unpack the ZIP file of the version you have just downloaded in an empty directory and then start AllplanSetup.exe by double-clicking the left mouse button




5. please select "Update" when asked for the installation option



6. when asked for the licence to be used, simply select "Use active licence"
7. under "Setup type", now select the Customised variant​​​​​​​



8. you can then first decide again on the languages to be installed

9. in the following window, you can select the manufacturers from which you would like to install the current catalogue data for the products. Please make your selection here.​​​​​​​



10. then you will be asked for the country packages, which is usually easy to confirm.

11) Finally, you will see a small overview window in which you can start the update installation.

After successful installation, the current catalogue data should now be available when using the functions for the reinforcement connections and can be used without any further messages.​​​​​​​


Hint:
Ideally, have these instructions carried out by your IT service provider/administrator.

Information:

This document provides further information on installing Allplan 2017.

Backing up and archiving data:

We strongly recommend that you back up and archive all your data before you upgrade to Allplan 2017.


How to install:


You can find detailed instructions on how to install Allplan 2017 in the following places:

- After you have downloaded Allplan 2017, you can find the install.chm file in the Helpfiles\English folder.
- You can find the install.chm file on the Allplan 2017 DVD in the following folder: <DVD>:\programs\x64\Allplan\Helpfiles\English.

Please read these instructions before you install Allplan 2017.

• System requirements for Allplan 2017
  
  https://connect.allplan.com/en/faqid/20160420112118.html
  
• How to handle licenses when upgrading to Allplan 2017
  
  Allplan 2016 introduced a new protection system. Licensing is now based on CodeMeter by Wibu Systems AG. You can no longer use Softlock, NemSLock server or hardlock with Allplan 2016 and Allplan 2017.
  
  https://connect.allplan.com/en/faqid/20160510151917.html
  
  
  

Some notes on installing Allplan 2017

If you want to switch from Allplan 2014/2015/2016 to Allplan 2017, you can choose between three installation options. We recommend using the second option: first-time installation and copy data from Allplan 2014/2015/2016.

1. First-time installation

This option installs Allplan 2017 to a new folder without affecting any other Allplan installation (2016 or earlier). Setup does transfer neither data nor settings to the new installation.

If you want to transfer data later, you have the following options:

You can uninstall Allplan 2017 and then upgrade from Allplan 2014/2015/2016.
You can integrate the data manually (requires administrative knowledge).

2. First-time installation and copy data from Allplan 2014/2015/2016

This option installs Allplan 2017 to a new folder without affecting any other Allplan installation (2016 or earlier). You can configure the program to automatically copy the office standard (\std), projects (\prj) and user data (\usr) from Allplan 2014/2015/2016 to the new installations folder.
This duplicates the data: you can use all projects, defaults and resources both in Allplan 2016 and in Allplan 2014/2015/2016. This way, you can test the new version without losing your 'old' Allplan version.
Bear in mind, though, that you should not mix data from different versions, as merging data later involves considerable time and effort.

2a. Continue with first-time installation and copy data from version

This option is available when you have already installed <Product_Version> and copied the data to a different computer that accesses the same data server. As a result, the data have already been transferred.

3. Upgrade and transfer data from Allplan 2014/2015/2016

This option installs Allplan 2017 to an existing folder, converting Allplan 2014/2015/2016 to Allplan 2017 and transferring all important settings. Afterwards, you can no longer work with Allplan 2014/2015/2016.
This does nor affect earlier Allplan versions (Allplan 2013 or earlier).



Installing on a network:

• If you work in a network environment (one common central file storage folder), you must upgrade all workstations to Allplan 2017. Therefore, make sure you can upgrade all workstations (deadline for Serviceplus agreement: July 1, 2016) beforeyou start installing.
• During the upgrade, Allplan 2014/2015/2016 must not be running on any workstation.
• When installing with Workgroup Manager, make sure all workstations are checked in before you start upgrading.

Converting data:

• Data from earlier Allplan versions must be converted. Allplan 2017 automatically converts the data of a project you open. Click here for instructions on how to convert all projects in a single step:
  
  https://connect.allplan.com/en/faqid/20090408124904.html
  
  

IBD 2017

IBD 2017 is expected to be released with the Allplan 2017-0-1 Hotfix at the end of July 2016.
https://connect.allplan.com/en/faqid/20160707142752.html

Information:

This document provides further information on installing Allplan 2019.

Backing up and archiving data:

We strongly recommend that you back up and archive all your data before you upgrade to Allplan 2019.


How to install


You can find detailed instructions on how to install Allplan 2019 in the following places:

- After you have downloaded and unzipped Allplan 2019, you can find the ‘install.chm’ file in the following folder: C:\Users\Public\Documents\Allplan 2019\HelpFiles\English.

- Use the following link:
https://webdrive.allplan.com/s/4LrjrymoxESzC6p and open the General\Installation help\2019 folder.


Please read these instructions before you install Allplan 2019.

System requirements for Allplan 2019

https://connect.allplan.com/en/faqid/20180608093815.html

How to handle licenses when upgrading to Allplan 2019

https://connect.allplan.com/en/faqid/20180608092654.html



Some notes on installing Allplan 2019

If you want to switch from Allplan 2016/2017/2018 to Allplan 2019, you can choose between three installation options. We recommend using the second option: first-time installation and copy data from Allplan 2016/2017/2018.

1. First-time installation

This option installs Allplan 2019 to a new folder without affecting any other Allplan installation (2018 or earlier). Setup does not transfer any data or settings to the new installation.

If you want to transfer data later, you have the following options:

You can uninstall Allplan 2019 and then upgrade from Allplan 2016/2017/2018.
You can integrate the data manually (requires administrative knowledge).

2. First-time installation and copy data from version

This option installs Allplan 2019 to a new folder without affecting any other Allplan installation (2018 or earlier). You can configure Setup to automatically copy the office standard (\std), projects (\prj) and user data (\usr) from Allplan 2016/2017/2018 to the new installations folder.
This duplicates the data: You can use all projects, defaults and resources both in Allplan 2018 and in Allplan 2016/2017/2016. This way, you can test the new version without losing your 'old' Allplan version.
Bear in mind, though, that you should not mix data from different versions. Merging data later involves considerable time and effort.

2a. Continue with first-time installation and copy data from version

This option is available when you have already used the second installation option to install <Product_Version> to a computer that accesses the same data server. As a result, the data are already available.

3. Upgrade and transfer data from Allplan 2016/2017/2018

This option installs Allplan 2019 to an existing folder, converting Allplan 2016/2017/2018 to Allplan 2019 and transferring all important settings. Afterwards, you can no longer work with Allplan 2016/2017/2018.
This does nor affect earlier Allplan versions (Allplan 2015 or earlier).


Installing on a network:

• If you work in a network environment (one common central file storage folder), you must upgrade all workstations to Allplan 2019. Beforeyou start installing, make sure that all workstations can be upgraded. For technical reasons, it is not possible to mix installations of different major releases. Any related problems area not covered by service contracts.

• During the upgrade, Allplan 2016/2017/2018 must not be running on any workstation.

• When installing with Workgroup Manager, make sure all workstations are checked in before you start upgrading.

Converting the data:

Data from earlier Allplan versions need to be converted to version 2019. Allplan 2019 automatically converts the data of a project you open. Click here for instructions on how to convert all projects in a single operation:

https://connect.allplan.com/en/faqid/20090408124904.html


IBD 2019

Click here for instructions on how to get your activation codes for Allplan IBD:

https://connect.allplan.com/en/faqid/20110912113530.html

Information:

This document provides additional information on installing Allplan 2021.

Data backup/archiving:

We strongly recommend that you perform a complete data backup and archive this data before you upgrade to Allplan 2021!


Installation Instructions:


Detailed installation instructions can be found in the following places:

- If you have downloaded and unpacked Allplan 2021, you will find the file install.chm in the folder C:\Users\Public\Documents\Allplan 2021\HelpFiles\English


Please read these before installing Allplan 2021.

System requirements Allplan 2021

https://connect.allplan.com/de/faqid/20200930085615.html

Licenses when upgrading to Allplan 2021

https://connect.allplan.com/en/faqid/20200821110044.html


Extract from the installation instructions (see above)

If you want to switch from Allplan 2018/2019/2020 to Allplan 2021, you have three basic installation options.

1. New installation

Allplan 2021 is installed in a new folder. Any existing installations of Allplan (2020 or older) are not affected. No data and settings are transferred to the new installation.

The following options are available for transferring data later:

Uninstall Allplan 2021 and then upgrade Allplan 2018/2019/2020.
Integrating the data by hand (administrator knowledge required).

2. New installation with data copy from version

Allplan 2021 is installed in a new folder. Any existing installations of Allplan (2020 or older) are not affected. The office standard (\std), projects (\prj) and user data (\usr) can be automatically copied from an existing version 2018/2019/2020 to the new installation folder.
In this way, you can create a duplicate dataset if necessary: all projects, standards and resources can be used in both Allplan 2021 and 2018/2019/2020. This allows you to test the transition to the new version in real life, while the existing Allplan installation remains fully functional.
Note, however, that this method of working should avoid parallel processing of data in both installations, as the subsequent merging is time-consuming.

2a. Continuation of new installation with data copy from version

This option is available if a new installation with data copy has already been performed on another computer accessing the same data server and therefore the data has already been transferred.

3. Upgrade with data transfer from version 2018/2019/2020

Allplan 2021 is installed in an existing folder. The existing installation of Allplan 2018/2019/2020 is converted to Allplan 2021 and all important settings are transferred (see also Limitations for Data Transfer). Allplan 2018/2019/2020 is then no longer available.
Any existing installations older than Allplan 2018 are not affected.


Network Installations:

For network installations (shared 'central file storage folder'), only one main release version can be used - all workstations must be brought to Allplan 2021. Before starting the installation, make sure that all workstations have upgrade authorization. A mixed installation of different main versions is not technically approved. Complications that may arise are not covered by the maintenance contracts.

During the upgrade, no workstation may be running any version 2020, 2019 or 2018.

In case of an installation with Workgroupmanager all workstations must be checked in during the upgrade.




Data Conversion:

Data from older Allplan versions must be converted to version 2021. This happens automatically for projects opened in Allplan 2021. For instructions on how to convert all projects at once, click here:

https://connect.allplan.com/de/faqid/20090408124904.html

Question:
I purchased a new license and received a Product Key for Allplan. However, I work with an earlier Allplan version. How can I install and license Allplan 2015 or an earlier version despite the new license?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use Softlock (NemSLock) or hardlocks with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

For licensing earlier versions, you require the Client ID and CD Key. You can find this information in the delivery note or invoice. Instead of a temporary license, use the appropriate trial license to install Allplan 2015 or an earlier version. Then generate a registration request to license and activate the modules you purchased.

Note:
If you use a license server for which you purchased an additional license, please read the separate document or contact support.de@allplan.com. We will show you how to add the new license to the license server.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Allplan Connect:
https://connect.allplan.com/de/support/downloads.html


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Request a license registered for your computer
The trial license is valid for 30 days. It is not personalized.
Consequently, you have to enter your personal data manually when generating the registration request.
You can find the required Client ID and CD Key in the delivery note or invoice.

To generate a registration request, do the following:

Open the License Manager (Service application -> Utilities- > License -> License Manager).
Select the license entry for your seat and click 'Request license'. Please follow the instructions displayed on screen.

Note: Editing customer details requires administrator privileges. The system will issue an appropriate message. Close NemSLock License Manager and start the Services application again. To do this, click the Services desktop icon with the right mouse button and select 'Run as administrator' on the shortcut menu.


Enter the necessary details:
The Client IDhas eight zeros (00000000) and the CD Keyhas eight capital F's (FFFFFFFF).

For the Client ID, enter your customer number. You can find your customer number in the letteror delivery notethat came with Allplan.
For the CD Key, enter your CD Key, which you can also find in the letter or delivery note. Make sure you use small letters and capital letters accordingly.

Note:You can find the Client ID and CD Key at top left in the delivery note. The CD Keyusually consists of the numbers 0 to 9 and the capital letters A to F.


Fill out all the fields. Make sure you enter your email address correctly, because registered licenses and replies to status queries of license will be sent to the address you specify here.
Click Next >

For the seat, change the number 94 to the license you purchased, for example, 02, 03 or 04.
Specify how to send the registration file and click Next >.

Start email program ...
The program creates and saves the register.txt file before it opens your default email program. The program automatically attaches the registration file to the email and enters register (please no spam) @ (please no spam) nemetschek.defor the address.

Save the registration file ...
The program creates and saves the register.txt file before it opens the folder with the registration file in Windows Explorer. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.

In addition, you can see the data that were written to the registration file.

1. Click Finish.
   
2. Click Close to exit NemSLock License Manager.
   

You will receive a reply by email within a few minutes. This email provides information on the registration process and usually includes the registered license file.

Note: The registered license file is generated by an automated system. Consequently, any additional comments in incoming emails are not read.


3. Installing the license file
Shortly after we received the registration request, we will send you the final license file to the email address you specified in the registration request.
Install this license file as follows:

• Save the license file to any folder on the hard disk.
  If the license comes as a zip file, extract it.
• Next, install the license by double-clicking the license file ("customer#_seat.nslock").
  Confirm the dialog box.
• As an alternative, you can also use License Manager to install the license file (Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager).
  Click "Install - Install license" and then "Browse..." to select the license.
  Click "Finish" to complete the installation process.
• Your registered license is displayed in the License Manager. Clear the check box for the trial license (for example, seat 94 or 98). Make sure your registered license is the only license that is selected.

Question:

I purchased a new license and received a Product Key for Allplan. However, I use earlier Allplan versions with NemSLock server in my office. How can I install Allplan 2015 or an earlier version despite the new license? How can I activate the license on NemSLock server?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use NemSLock server with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Downloading from Allplan Connect:
https://connect.allplan.com/de/support/downloads.html

FTP server:
Copy this link and paste it into the address bar of Windows Explorer. Then press ENTER.
ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de
This opens the folder on our FTP server.

Go to /download/Allplan/2015/CD (choose the path in accordance with the version you need) and select the appropriate file. Then click Edit -> Copy (Ctrl+C).
Switch to a folder on your computer and select Edit -> Paste (Ctrl+V).
Extract the ZIP file. Right-click the EXE file and select "Run as administrator".
Deactivate the virus scanner during installation.


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Use NemSLock server to request a registered license for the new seat

If you have not used a license server until now, install the license server using the trial license for NemSLock Server.

Installing NemSLock Server

• Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

• The trial license is also on the FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/Allplan 2015 Nemslock Server Trial.nslsrv

• Select the trial license file for NemSLock Server. This license is valid for 30 days, but it includes only seat. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below).
• Select the full installation.
• If the service does not start automatically after Setup, select Control Panel -> Administrative Tools -> Services and start the Nemslock Server 2006 service.

Registering licenses

• Open NemSLock 2006 Server Consoleby clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
• Switch to Moduleson the left.
• Select one of your seats.
• Click the Registration request (register.txt)button.
• Click Edit.
• Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OKto confirm.
• Click Create registration request. Windows Explorer opens and shows the register.txt file.
  If you have closed Windows Explorer, you can find the file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is
  C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License.
• Use an editor to open the new register.txt file.

You can find the entry for your seat in line @23@seat:. Change it and enter your new seat number instead. For example, if you purchased seat 08, change the entry to @23@seat: 08. Save the file.

• You can now use all the options provided by Windows Explorer to copy the registration file to a computer with Internet connection. You can do this on the network or you can use a USB stick. You can then email the file to us.
• Send the email with the registration request to register@nemetschek.de.
• You will promptly receive your registered license for the new seat.

Installing licenses
Exit Allplan on all workstations.

• Open NemSLock 2006 Server Console.
• Click Stop serveron the left.
• Switch to Moduleson the left.
• Click Browse and select the registered license file.
• Click Install license file.
• After this, you can start the server again by clicking Start server.

Note:

If you purchased several new licenses, you have to generate and send a separate registration request for each seat. Just repeat the steps described above. You will then receive a registered license file for each seat. You must install each file.

Question:

How to install and run NemSLock Server?



Answer:

Before installing, check whether the package you received includes the following items:

• Temporary licenses for NemSLock Server, e.g. 1234567a_001_psd.nslsrv
• Temporary licenses for clients, e.g. 1234567a_001_psd_client.nslock

How to install NemSLock Server

• Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

• Select one of the temporary license files for NemSLock Server. These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
• When you opt for the “Custom” setup type, you can choose between the following program features:
  Console
  You can use this program to administer NemSLock Server. You can also install the console on more workstations so that you can administer the server from a number of different locations. However, you can only connect one console to the server at any one time.
  Server
  The actual license server.
  Logviewer
  This tool analyzes the log files of NemSLock Server.
  

By default, Setup installs all these features.
If you have several temporary licenses for NemSLock Server, use the server console to install the remaining licenses after the installation. The procedure is described in the section "How to install licenses".


How to register licenses

• Open NemSLock 2006 Server Console by clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
• Click "Modules" on the left.
• Select the seat you want to register. If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.
• Click the "Registration request (register.txt)" button.
• Click "Edit".
• You must fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
• Click "Create registration request". Windows Explorer opens and shows the register.txt file. If this window is closed, you can find this file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is:
  C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License
• Now you can use all the options provided by Windows Explorer to copy the registration file to a computer with Internet access on the network. Alternatively, you can also use an USB stick. You can then email this file to us.
• Send the email with the registration request to register@nemetschek.de

How to install licenses

• Open NemSLock 2006 Server Console.
• Click "Stop server" on the left.
• Click "Modules" on the left.
• Click "Browse" to navigate to the registered license file.
• Click "Install license file".
• After this, you can start the server again by clicking "Start server".

How to set up users (optional)

• predefined user ALLis created automatically. If there is no other user, each user is given the privileges of the user ALL. By default, this user can use all licenses but cannot check out any licenses. By double-clicking the user, you can change the user's privileges.
• predefined user ALLallows all users to use licenses. In order to do this, the users must be able to access the server. You do not need to create individual user profiles until you want to assign specific rights to individual users or limit access to selected users. predefined user ALL. If you want to work only with individual users, you should deactivate the predefined user ALL by revoking the user's right to use licenses.
• predefined user ALL has administrator privileges unless another user is created and appointed as the administrator. As soon as you have appointed an administrator, ALL no longer has administrator privileges.
• You can enter users in the “Users.mcf” file. predefined user ALL has administrator privileges again. In addition, each user can once again administer the license server using the console.
• The administrator user is not a special user. If there are several administrator users, only one administrator user can start the console for this license server at any one time.
• If you are setting up users without giving administrator privileges to anyone, the program will ask you whether you want to appoint yourself as the administrator.

You can also specify a domain (user authentication for Windows server). However, this is not mandatory. If you do not specify a domain, the program uses the Windows user name for each user.

The program writes the user accounts and the associated access rights as ASCII text to the users.mcf file.

You can find this file in the \Programs folder of the NemSLock Server installation. You cannot rename, delete or move this file. If the program can no longer connect to this file, you must exit NemSLock Server, restart it and enter all users again from scratch. predefined user ALLis retained.

Note:
Experienced administrators can use the PowerShell script NemGenUsers.ps1. This file is in the \Programs folder of the NemSLock Server installation or you can find it as an FAQ in Allplan Connect:

connect.allplan.com/en/faqid/20120907161911.html



How to install and configure clients

• Use one of the nslock license files you received to install the clients. Do not use the trial license or the license server license. It is irrelevant which of the client licenses you use, as the actual license will come from the license server later.
• You do not need to register the clients.
• When switching from Hardlock to NemSLock (server), you need to update the client using a nslock license file.

After having installed the client, you need to switch to the license server:

• Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
• If the license server window is not visible, select "Configure NemSLock Server" at the bottom. Lock this window. All you need to do is click the drawing pin icon.
• Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
• Now the user can select one of the seats provided.
• After having successfully connected to the license server, clear the check boxes for the trial licenses in the area at the top.
• Click "Close" to complete the configuration. Now you can start Allplan.

Notes:

• If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
• 2014-1 and later: If the latest version of License Manager is installed (file version 1. 0. 26. 153 or later, see License Manager- Options- System), you can also select several licenses. If one of the selected licenses is currently being used by someone else, the program will automatically select the next available license.
• Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
• The license server and the licenses are downward compatible; they can be used in conjunction with older Allplan versions.
  

Question:

How can I install and configure the hardlock license server?



Note:

You can find a PDF file with detailed instructions in the ..\Manual\<language> subfolder of the setup folder (see below). Below is a brief description of the most important steps.



Answer:

At the server

• The hardlock license server runs on the following operating systems: Windows 2000 Server, Windows 2000, Windows XP Professional or Windows 2003 Server. Although additional operating systems are possible, they are not approved officially. The 64-bit versions of the operating systems stated above require a special hardlock driver, which you need to install. To do this, follow this link:
  ftp://ftp.ealaddin.com/pub/aladdin.de/hardlock/hldrv32.zip
• You can find the license server setup on our FTP server:
  ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2005/Lizenzserver_2005.0c.zip
• Click 'setup.exe' to start installing the license server. You can choose any folder for the installation folder. Please connect the dongle to the server before you start installing.
• When the installation is complete, open the License Manager of the license server. The License Manager should not issue any error messages, and all the licenses should be displayed on the "Licenses" tab.

At the client

• You usually use the license of the license server to install the client. If the client has already been installed, you can also install this license later. To do this, open the Services application, click Utilities -> License -> Install HARDLOCK license.
• Next, you need to configure the License Manager of the client for the license server. To do this, open the Services application again, click Utilities -> License -> License Settings, and switch to "License server via RPC" in the "Licenses" area on the "General" tab. Finally, type in the computer name of the license server in the "Computer with license server service" box at bottom right and click "Apply". If you do not see an error message, the client is now connected with the license server. That's all!

Question:

I purchased the license server. How can I install and configure the license server?



Answer:

Allplan is using since version 2016 a new protection system. Licensing is based on CodeMeter by Wibu Systems AG since then. You can no longer use NemSLock Server with Allplan 2016 and higher.

Allplan requires a Product Key. Using this key, you can activate your license online. The Product Key is a unique, 26-digit character string. You can use it to activate a license for Allplan.
You can find your Product Key in Allplan Connect. Go to http://connect.allplan.com/license
Note: The license is downwards compatible til version Allplan 2016-1-4 even if a higher version is displayed.

To install the license server, download the software for the license server from Allplan Connect


The Wibu license server is part of the CodeMeter driver, which is installed along with Allplan. If you have already installed Allplan on the license server, you do not have to install additional software. But you can also install the license server separately; you do not have to install Allplan.
In any case, install and activate the license server before you install Allplan on the clients.

You can activate a license in online mode only if you have ...

• Internet access
• a Product Key
• a license server license; you cannot use other licenses with the license server.

Installing the license server

• You must install the license server on a 64-bit Windows system.
• Start License Server Setup on the computer you want to use as the license server.
• Click Install.
• Start the license server by starting the License Settings program. Go to the License activation area, enter your Product Key and click Activate license.
• If you have more licenses for the license server, enter the respective Product Keys and activate the licenses.
• Afterwards, start CodeMeter Control Center.

To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen: enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.

Or
Enter Localhost:22350in the address bar of your browser.

• Select Configuration -> Server -> Access server in the Network server area and click Activate.
• Click Apply.

Configuring the license server (optional)

You can use the CodeMeter WebAdmin application to administer the license server.
To start and stop the license server service, you can use CodeMeter Control Center.

• CodeMeter Control Center -> Action -> Start or Stop CodeMeter Service

Access control
By default, all users on the LAN, who have installed the CodeMeter driver, can use a license from the license server.

• Basic access control: you can enter a list of client computer names or IP addresses that are allowed to access the license server.
• Advanced access control: you can specify global access rules (for all licenses) to control access to the licenses.

License tracking
To activate license tracking, you have to set the HKEY_LOCAL_MACHINE\SOFTWARE\WIBU-SYSTEMS\CodeMeter\Server\CurrentVersion\LogLicenseTracking registry entry to 1 and restart CodeMeter Service.

After having activated this key, you can use CodeMeter WebAdmin to create a report showing details about the licenses used over a specific period of time. To do this, open CodeMeter WebAdmin and go to the 'Server' - 'License Tracking' page. Select the period of time and the license for which you want to generate a report. Then click 'Create report'. If you click a single bar, you will get detailed analyses per day or per hour.

CodeMeter WebAdmin saves the reports to C:\ProgramData\CodeMeter\Logs.



Installing and configuring clients

Note for Version 2016: Install at least Allplan 2016-1-4 on the clients.

The license server license will be detected automatically on the network.
Install Allplan on the clients. When you are prompted to select the license file, click Use active license. Follow the installation instructions.

• You do not need to activatethe clients.

Allplan automatically finds the license server on the local network. If you have not selected a license, Allplan automatically selects the first available license.

After having installed Allplan on the clients, you can use the 'License Settings' dialog boxto configure license selection.
Services application -> Utilities -> License settings

Areas:

• License activation: this area is not relevant to clients taking their license from the license server.
• License selection: use this section if you get the license from a license server or if you have several licenses and you want to select the preferred license.
• Start as a viewer: click this button if you want to start Allplan as a viewer.

License selection

You can see the names of the available licenses with their seat numbers.
The 'Available' column indicates how many licenses are still available. Click the dropdown arrow to see a list of users currently working with a license.

Priority:
Select the check box in front of a license to select this license as a favorite. You can mark as many licenses as you want. Allplan will then prefer these licenses. Click to select one ore more licenses Allplan is not to use. If you do not select any license or if you have selected several favorites, Allplan will automatically use the first free license it finds.

Find license server automatically:
When you select this option, Allplan automatically detects a license server on the LAN. In some cases, such as VPN connections, Allplan may not be able to detect a server automatically. In this case, you can enter the server manually (see Additional server name).
Note: Only the Windows administrator can change this option.

Additional server name:
If 'Find license server automatically' is not active or Allplan has not automatically found a license server, you can manually enter the name or the IP address of the server. If 'Find license server automatically' is active, you can enter an additional server. After having entered the server name, click 'Update' to see the licenses of the license server. Use semicolons to separate several server names.


Note:

You can find detailed information on the license server in the License Settings help (F1 key).

Allplan communicates with the license server via TCP/IP. By default, communication is via Port 22350 unless you change the port in CodeMeter WebAdmin.

If a firewall is active on your computer, you must enable port 22350 for TCP and UDP. If the firewall filters in an application-specific manner, you have to enable the CodeMeter.exe license server service. You can find this service in the %Program Files (x86)%\CodeMeter\Runtime\bin Windows folder. Define the CodeMeter.exe service as an exception in the firewall. Some anti-virus programs also include firewall functions. If you are not sure, contact the manufacturer of the anti-virus program.

Question:

How can I install a hotfix?


Answer:

Allplan automatically downloads hotfixes and installs them the next time you start Allplan.
To define settings in Allplan, open the ? menu and select Update Allplan.

Click the Find now button to find updates and install them the next time you start Allplan.


Notes:

1. Downloading hotfixes manually

You can also download hotfixes manually.
Open our homepage
(http://www.connect.allplan.com) and select
Downloads.

The current hotfix and previous hotfixes are available for download.
Before you can download data, you must log in to Allplan Connect


2. Installing hotfixes downloaded manually

You can install the hotfixes downloaded by double-clicking the file. Make sure both Allplan and the Services application are closed.
Hotfixes are installed one after the other in the correct order. In other words, you must download and install Hotfix 2014-1-1 before you can install Hotfix 2014-1-2.


3. Working with Workgroup Manager

If you work with Workgroup Manager and another user has already downloaded the hotfix, you can see the following message:

There are currently no updates available.

In tis case, the hotfix is in the Downloadfolder on the server. In Allplan select ?-> Update Allplan. Choose one of the following options to install the hotfix the next time you start Allplan:

• Install updates automatically-> the next time you start Allplan, the program will install the hotfix without asking you again.

• Download updates, install manually (recommended)-> the next time you start Allplan, a dialog box opens and you can decide whether you want to install the hotfix.

The default setting is
'Download updates, install manually (recommended)'.

Question:

Which graphics cards are recommended for Allplan?



Answer:


Follow this link to see a list of the AMD/ATI & NVidia graphics cards manufacturers that are CERTIFIED FOR ALLPLAN.
We have tested the OpenGL functionality and the animation performance of various Allplan modules with specially prepared data with each of the cards available.
https://www.allplan.com/services/cad-software-support/grafikkarten.html

The tested drivers can be found on the homepage of the individual manufacturer. The driver versions that were used in the tests are included in the tables so that you can compare the data. However, we strongly recommend that you always installthe current driver of the manufacturer.

It is a good idea to check your system using the system tool you can find on our homepage:
https://www.allplan.com/services/cad-software-support/downloads.html



Additional information:

Allplan 2011 was revised completely for accelerated graphical representation.
To guarantee full performance support for Allplan 2011 and later, please check that your graphics cards meet the hardware requirements for DirectX 10 & OpenGL 2.0 (chip-based). In addition, you need to install the current drivers. Allplan will automatically switch to the conventional drawing method when it starts and finds old graphics cards that do not meet the requirements stated above.

For more information on graphics card specifications, go to

http://en.wikipedia.org/wiki/Comparison_of_AMD_graphics_processing_units
http://en.wikipedia.org/wiki/Comparison_of_NVIDIA_graphics_processing_units#Quadro)



Note:

We kindly ask you to understand that products of other manufacturers that are not mentioned have not been tested and therefore cannot be recommended.

Question:

What license issues do I need to consider when upgrading from Allplan 2016/2017/2018 to Allplan 2019?


Answer:

Installation options during Setups

First-time installation with copying data (default): this option copies and converts the data of the previous version to the new version. You can choose to transfer projects, too. This option does not change the previous version.
Upgrade: this option also transfers the data to the new version. However, you can no longer use the previous version after upgrading.
First-time installation: this option installs Allplan 2019 in parallel to the version you are running. However, your data will neither be transferred nor converted. You can find more information in the help. Just press F1 during Setup.


Depending on the licensing system you use, you need to consider different points.

1. Upgrade Allplan 2019 – stand-alone workstation
The license for Allplan 2019 updates automatically. Start Setup and follow the instructions displayed. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.
Note: The licenses only update automatically when you upgrade. To install Allplan 2019 on a new computer, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Transferring license to a new computer.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license

2. Upgrading Allplan 2019 with a license server
Start by updating your license(s) at the license server. After this, upgrade the clients. To do this, start the License Settings program on the server. Click License Activation on the left, and then click the license you want to update. Click Update License.

After updating your license(s) you can upgrade Allplan at the clients. Start Allplan Setup and follow the instructions displayed. The license server license will be detected automatically on the network. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.

Add-on: If your license server displays a detailed version number (build ID) directly in the lower left corner of the program License Settings, it is usually compatible with the new version and does not need to be updated. You only need to update the license(s).
If you still want to update your license server, download the software for the license server from the Allplan Connect service portal. Detailed instructions can be found at connect.allplan.com/license under the menu item Information on installation and Licensing' and the instructions 'Updating license server and licenses'.

Note: You can update the licenses only at a license server you have already installed. If you want to switch to Allplan 2019 and move the license server to a new server, please read on
connect.allplan.com/license within the menu item Information on Installation and Licensing the
instructions Moving license server to a new server.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license


Downloading licenses from Allplan Connect
You can also obtain your activation codes for Allplan 2019 IBD in the Allplan Connect service portal.
To do this, click Profile > License Management.

You can only use this function as an administrator.


License for Allplan Allfa 2018
You will get your license by mail from customercare@allplan.com. So that we can create the license for you, please send us your IP address or the Host ID of the Allfa database server (Oracle).

Question:

What license issues do I need to consider when upgrading from Allplan 2015/2016/2017 to Allplan 2018?



Answer:

Depending on the licensing system you use, you need to consider different points.


1. Upgrading stand-alone workstations

1a. Stand-alone workstation - upgrading from Allplan 2016 or 2017
The license for Allplan 2018 updates automatically. Start Setup and follow the instructions displayed. When you are prompted to select the license file, click ‘Use active license’.
Follow the instructions and install Allplan.

Note: Licenses only update automatically when you upgrade. If you want to install Allplan 2018 on a new computer, read the following instructions: https://connect.allplan.com/en/faqid/20150618131629.html

You can find your Product Key in Allplan Connect as usual. Go to http://connect.allplan.com/license

1b. Stand-alone workstation - upgrading from Allplan 2015
Allplan 2016 introduced a new protection system. Licensing is now based on CodeMeter by Wibu Systems AG. You require a Product Key for Allplan. Start Setup and follow the instructions displayed. When you are prompted to select the license file, click 'License activation'. Enter your Product Key (26-digit code) and click 'Activate license'. By activating the license, you connect the license with the computer. Follow the instructions and install Allplan.
You can find detailed information at
https://connect.allplan.com/en/faqid/20150618130717.html




2. Upgrading license server workstations

2a. License server workstations - upgrading from Allplan 2016 or 2017
Start by updating your license(s) at the license server. After this, upgrade the clients.

Check the version of the license server. If you use the license server 2016-1-4 or later, you can find the version number (Build-ID) at bottom left in the License Settingsprogram. The version number should be at least 1.614.x.x. If you cannot find the Build-ID, you work with an older license server. In this case, update the license server first. Download the software for the license server from Allplan Connect.

You can find detailed information at
https://connect.allplan.com/en/faqid/20160527114300.html

After having updated the licenses, you can upgrade Allplan at the clients. Start Setup and follow the instructions displayed. The license server license will be detected automatically on the network. When you are prompted to select the license file, click 'Use active license'. Follow the instructions and install Allplan.

Note: You can only use an existing license server to update licenses. If you want to use a new license server with Allplan 2018, read the following instructions:
https://connect.allplan.com/en/faqid/20150618134224.html

You can find your Product Key for Allplan 2018 in Allplan Connect as usual. Go to http://connect.allplan.com/license


2b. License server workstations - upgrading from Allplan 2015
Start by installing the license server. After this, upgrade the clients.
You can find detailed information at
https://connect.allplan.com/en/faqid/20150618084450.html

Downloading licenses from Allplan Connect

You can find your license for Allplan 2014 BCM and the activation code for Allplan 2018 IBDin Allplan Connect. As an extra servicewe provide the old licenses for hardlock stand-alone workstations, the temporary licenses for NemSLock and the Product Keys for the new software protection system. Click
Profile > License administration.
Only administrators can use this function.


License for Allplan Allfa 2017
You will get your license by mail from customercare@allplan.com. So that we can create the license for you, please send us your IP address or the Host ID of the Allfa database server (Oracle)

Question:

What license issues do I need to consider when upgrading from Allplan 2017/2018/2019 to Allplan 2020?


Answer:

Installation options during Setups

First-time installation with copying data (default): this option copies and converts the data of the previous version to the new version. You can choose to transfer projects, too. This option does not change the previous version.
Upgrade: this option also transfers the data to the new version. However, you can no longer use the previous version after upgrading.
First-time installation: this option installs Allplan 2020 parallel to the version you are running. However, your data will neither be transferred nor converted. You can find more information in the help. Just press F1 during Setup.


Depending on the licensing system you use, you need to consider different points.

1. Upgrade Allplan 2020 – stand-alone workstation

The license for Allplan 2020 updates automatically. Start Setup and follow the instructions displayed. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.

Note: The licenses only update automatically when you upgrade. To install Allplan 2020 on a new computer, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Transferring license to a new computer.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license

2. Upgrading Allplan 2020 with a license server

Start by updating your license(s) at the license server. After this, upgrade the clients. To do this, start the License Settings program on the server. Click License Activation on the left, and then click the license you want to update. Click Update License.

After updating your license(s) you can upgrade Allplan at the clients. Start Allplan Setup and follow the instructions displayed. The license server license will be detected automatically on the network. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.

NOTE: If your license server displays a detailed version number (build ID) directly in the lower left corner of the program License Settings, it is usually compatible with the new version and does not need to be updated. You only need to update the license(s).
If you still want to update your license server, download the software for the license server from the Allplan Connect service portal. Detailed instructions can be found at connect.allplan.com/license under the menu item Information on installation and Licensing' and the instructions 'Updating license server and licenses'.

Note: You can update the licenses only at a license server you have already installed. If you want to switch to Allplan 2020 and move the license server to a new server, please read on
connect.allplan.com/license within the menu item Information on Installation and Licensing the
instructions Moving license server to a new server.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license


Downloading licenses from Allplan Connect
You can also obtain your activation codes for Allplan 2020 IBD in the Allplan Connect service portal.
To do this, click Profile > License Management.

You can only use this function as an administrator.


License for Allplan Allfa 2019
You will get your license by mail from customercare@allplan.com. So that we can create the license for you, please send us your IP address or the Host ID of the Allfa database server (Oracle).