Question:

What license issues do I need to consider when upgrading from Allplan 2018/2019/2020 to Allplan 2021?


Answer:

Installation options during Setups

First-time installation with copying data (default): this option copies and converts the data of the previous version to the new version. You can choose to transfer projects, too. This option does not change the previous version.
Upgrade: this option also transfers the data to the new version. However, you can no longer use the previous version after upgrading.
First-time installation: this option installs Allplan 2021 parallel to the version you are running. However, your data will neither be transferred nor converted. You can find more information in the help. Just press F1 during Setup.


Depending on the licensing system you use, you need to consider different points.

1. Upgrade Allplan 2021 – stand-alone workstation

The license for Allplan 2020 updates automatically. Start Setup and follow the instructions displayed. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.

Note: The licenses only update automatically when you upgrade. To install Allplan 2020 on a new computer, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Transferring license to a new computer.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license

2. Upgrading Allplan 2021 with a license server

Start by updating your license(s) at the license server. After this, upgrade the clients. To do this, start the License Settings program on the server. Click License Activation on the left, and then click the license you want to update. Click Update License.

After updating your license(s) you can upgrade Allplan at the clients. Start Allplan Setup and follow the instructions displayed. The license server license will be detected automatically on the network. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.

NOTE: Check the version of your installed license server on the server. Starting with the license server version 2016-1-4, the detailed version status (Build-ID) is displayed directly in the lower left corner of the License Settings program.

The latest version 1.1196.xxx.xxx should be displayed here. If an older Build ID is displayed, then you still have an older license server in use. In any case, please update your license server. Download the software for the license server from the Allplan Connect service portal. Detailed instructions can be found at connect.allplan.com/license under the menu item Information on installation and Licensing' and the instructions 'Updating license server and licenses'.

Note: You can update the licenses only at a license server you have already installed. If you want to switch to Allplan 2021 and move the license server to a new server, please read on
connect.allplan.com/license within the menu item Information on Installation and Licensing the
instructions Moving license server to a new server.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license


Downloading licenses from Allplan Connect
You can also obtain your activation codes for Allplan 2021 IBD in the Allplan Connect service portal.
To do this, click Profile > License Management.

You can only use this function as an administrator.


License for Allplan Allfa 2019
You will get your license by mail from customercare@allplan.com. So that we can create the license for you, please send us your IP address or the Host ID of the Allfa database server (Oracle).

Task:

You have installed Allplan on several local workstations. Now you want to change the installation so that you can access a common network drive.



Note:

Before you switch to a network installation, it is essential that you back up all the data of all the workstations.
We strongly recommend that you take advantage of the expertise of Nemetschek’s technical support staff. We are happy to help you!



Solution:

The following description shows how to change several workstations where Allplan is installed locally and the project data is also stored locally on each computer to workstations with a common network drive without Workgroup Manager.

1st - getting ready
Choose one of the workstations where you will install all the projects and the office standard (hereinafter referred to as the main workstation).
First, move all the projects to the main workstation.

1.a: copying resources into projects
To make sure that the projects in your office have a uniform appearance, change the path settings for the projects' resources to 'Project'.
Make the following setting for each project:
Allplan -> File menu -> ProjectPilot - Admin -> select the individual projects one after the other -> right mouse button -> Properties -> Settings tab
Set the path settings for 'Pen and line definitions', 'Fonts', 'Patterns, hatching styles, area styles', 'Bar and mesh cross-section catalogs', 'Layer structures, line styles, drawing types' and 'Attributes proposed' from 'Office' to 'Project', if necessary.
The corresponding elements are copied from the office standard directly to the project. This ensures that the project settings stay the same even when you copy the project to the new server with the new office standard.

1.b: same folder name as project name
Open the 'General' tab and select the 'Same folder name as project name' setting if you want to proceed as described in 2b.

1.c: pen color ("Color stands for pen")
The pen color for the "Color stands for pen" setting is a user-specific setting that is not saved in the project but in the user folder (...\Usr).

2.a: backing up projects of the individual workstations and importing them to the main workstation (recommended method):
Back up the individual projects. To do this, open the Services application and select Data Backup -> Create -> Entire folders -> Projects.
You can back up several projects in a single operation.
Before you start, specify the backup folder on the network or on the local hard disk: Services application -> Configuration -> Backup path ->Browse for Folder.

The next step is to import the saved projects to the main workstation.To do this, open theServices application -> Data Backup -> Import -> Projects Before you import the individual projects, you can create new Allplan projects at the main computer. As an alternative, you can also create a new project during the import.

2.b: backing up projects of the individual workstations and importing them to the main workstation (special approach):
This approach should only be used with good reason for exceptional cases as it requires in-depth knowledge of Windows.
With this method, Windows Explorer is used to import the projects to the main workstation.
If some project names exist twice, you need to rename these projects before you back them up.

You can then rename the existing 'project.dat' file in the Prj folder of the main workstation.
Next, select the Services application -> Service -> Hotline Tools -> reorg -> Restore project management file.
The system creates a new project administration file (project.dat), which should list all projects with names.

Now the main workstation contains the latest version of all the projects of the office.

3rd - merging project defaults
Open ProjectPilot at the individual workstations and copy the elements you want to transfer (symbols, smart symbols, lists, schedules, and so on) to the external path. Of course, you can set the external path to a common network folder that can be accessed by all workstations.
Next, open ProjectPilot at the main workstation and copy the contents of the external path to the office standard.

4th - data backup

• Back up the projects, office standard and user settings at the main workstation:
  You can also copy the ..\prj (projects), ..\std (office standard) and ..\usr (user folder) paths to a backup folder (Nemsic, for example) on the hard disk.
• In addition, you need to back up the ..\usr\local folder at every stand-alone computer.
• Export the user interface setting of each user to a file: Allplan -> Tools - > Customize .... -> Export...

5th - uninstalling
Remove Allplan from all workstations.

6th - reinstalling
Before you install the same version again, create and share a folder (Nemdata, for example) on the future data server. Create a subfolder - Allplan - in this folder.

The next step is to reinstall the same version on all the workstations.

Specify the following installation paths:
Program folder:
local (C:\Programs\Nemetschek\Allplan, for example)
Central file storage folder:
Browse -> Network...
Find the sharedNemdata folder and select the Allplan folder.

After this, start installing.

7th - testing the start and restoring the backup
After the installation (check whether Allplan starts), copy the ..\prj and ..\std folders you backed up from the main workstation to the new ...\Nemdata\Allplan server folder.

Next, use Windows Explorer to copy the contents of the former user folder (…\usr\local) of the stand-alone workstation to the new user folder of the computer you just installed.

8th - updating the project administration file
Go to the project.datfile in the ...\Nemdata\Allplan\Prjfolder and rename itproject.alt.After this, do the following:
Services application -> Service -> Hotline Tools -> reorg -> Restore project management file.

9th - summary
Now all the workstations access a common network drive with the same project pool and office standard.
With this type of installation, only one user can access a project at any one time. If several users are to work on a project at the same time, you need to install Workgroup Manager.

Question:

What license issues do I need to consider when upgrading from Allplan 2015/2016/2017 to Allplan 2018?



Answer:

Depending on the licensing system you use, you need to consider different points.


1. Upgrading stand-alone workstations

1a. Stand-alone workstation - upgrading from Allplan 2016 or 2017
The license for Allplan 2018 updates automatically. Start Setup and follow the instructions displayed. When you are prompted to select the license file, click ‘Use active license’.
Follow the instructions and install Allplan.

Note: Licenses only update automatically when you upgrade. If you want to install Allplan 2018 on a new computer, read the following instructions: https://connect.allplan.com/en/faqid/20150618131629.html

You can find your Product Key in Allplan Connect as usual. Go to http://connect.allplan.com/license

1b. Stand-alone workstation - upgrading from Allplan 2015
Allplan 2016 introduced a new protection system. Licensing is now based on CodeMeter by Wibu Systems AG. You require a Product Key for Allplan. Start Setup and follow the instructions displayed. When you are prompted to select the license file, click 'License activation'. Enter your Product Key (26-digit code) and click 'Activate license'. By activating the license, you connect the license with the computer. Follow the instructions and install Allplan.
You can find detailed information at
https://connect.allplan.com/en/faqid/20150618130717.html




2. Upgrading license server workstations

2a. License server workstations - upgrading from Allplan 2016 or 2017
Start by updating your license(s) at the license server. After this, upgrade the clients.

Check the version of the license server. If you use the license server 2016-1-4 or later, you can find the version number (Build-ID) at bottom left in the License Settingsprogram. The version number should be at least 1.614.x.x. If you cannot find the Build-ID, you work with an older license server. In this case, update the license server first. Download the software for the license server from Allplan Connect.

You can find detailed information at
https://connect.allplan.com/en/faqid/20160527114300.html

After having updated the licenses, you can upgrade Allplan at the clients. Start Setup and follow the instructions displayed. The license server license will be detected automatically on the network. When you are prompted to select the license file, click 'Use active license'. Follow the instructions and install Allplan.

Note: You can only use an existing license server to update licenses. If you want to use a new license server with Allplan 2018, read the following instructions:
https://connect.allplan.com/en/faqid/20150618134224.html

You can find your Product Key for Allplan 2018 in Allplan Connect as usual. Go to http://connect.allplan.com/license


2b. License server workstations - upgrading from Allplan 2015
Start by installing the license server. After this, upgrade the clients.
You can find detailed information at
https://connect.allplan.com/en/faqid/20150618084450.html

Downloading licenses from Allplan Connect

You can find your license for Allplan 2014 BCM and the activation code for Allplan 2018 IBDin Allplan Connect. As an extra servicewe provide the old licenses for hardlock stand-alone workstations, the temporary licenses for NemSLock and the Product Keys for the new software protection system. Click
Profile > License administration.
Only administrators can use this function.


License for Allplan Allfa 2017
You will get your license by mail from customercare@allplan.com. So that we can create the license for you, please send us your IP address or the Host ID of the Allfa database server (Oracle)

Question:

My computer does not have Internet access, but I would like to activate the license with the Product Key. What can I do?


Information:

The easiest way to activate and return Allplan licenses is to do this online. In other words, the computer has Internet access. However, you can also activate Allplan on a computer without Internet access (offline licensing). Offline licensing is particularly useful if some Allplan computers in your office do not have Internet access and do not use a license server either.

If the computer without Internet access and the computer with Internet access are neither close to each other (for example, the computer in the office hasInternet access, but the computer at home does not haveInternet access) nor connected with each other (for example, using LAN), offline activation is not very suitable, as you have to access both the computer with Internet access and the computer without Internet access.

Requirements for activating a license offline:

• You have a valid Product Key.
• You have installed Allplan on the computer without Internet access (for example, as a viewer).
• You have another computer with Internet access.

Important: Activating a license offline involves two steps. In addition, you need to upload a receipt file so that you can return the license offline later.

There are the following basic steps:

• Creating and uploading the license request file
• Downloading and importing the license update file
• Creating and uploading the receipt file

The online computer uses the following web page:
http://lc.codemeter.com/59885/depot_151/index.phphttp://lc.codemeter.com/59885/depot/index.php


Note:

As both the license file and the receipt file are saved with the name of the container number by default, it may happen that you mix up these two files. Therefore we strongly recommend that you use meaningful names for the files. For example, the name could include the name of the computer and the Product Key or the words “license” and “receipt”.
This is particularly important if you want to activate several computers offline.


Answer:

A: Activating licenses offline

To activate licenses, use CodeMeter Control Center.

Start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. An an alternative, go to the Windows search box and type Codemeter.

You can find the container numbers in the ‘License’ area.
If you have a stand-alone license, the name of this container is Allplan GmbH and its number is 327XXXXXXX.

Select this container and click Activatelicense on the right. Select
Create license request. Create a *.WibuCmRaC file for your container.

Take this file to a computer that is online.
Go to the following web page:
http://lc.codemeter.com/59885/depot/index.php

Enter your Product Keyin the “Ticket” line and click Next. You can now see your license.
Click Activate license.

You can see your license and all available updates, which should be selected. Click Offline License Transferat the bottom on the right.

You can now upload the *.WibuCmRaC file (Browse....) by clicking Upload license request now. This creates your license, which you can download by clicking Download license update file now. Install this license on your computer.

To do this, go to CodeMeter Control Center and click File-> Importlicense.


You can see the activated license in the Services application -> Utilities -> License settingsand you can now use this license for Allplan.


Finally, upload the receipt file.
To do this, open CodeMeter Control Centeragain and select the new Allplan GmbH license with the number 128-XXXXXXX.

Then click License update -> Next -> Create receipt.
Create the receipt file for this container.
Upload this receipt file using the web page.

Take this file to the computer that is online. Click Nexton the web page.
If you have already closed the web page, use the link given above and enter your Product Key once again. Then select Continue with license transfer.
Select the receipt file and click Upload receipt now.
Click OKto confirm. This completes license activation.




B: Returning licenses offline

You can return licenses in the same way:
Start CodeMeter Control Center and select the container with the license (Allplan GmbH with the number 128-XXXXXXX). Then click License update -> Next -> Create license request.
Here, too, create a *.WibuCmRaC file for your container.

Take this file to a computer that is online.
Here, too, go to the following web page:
http://lc.codemeter.com/59885/depot/index.php

Enter your Product Keyin the “Ticket” line and click Next. You can now see your license.
Click Move license.
Click Offline License Transferat the bottom on the right.
You can now upload the *.WibuCmRaC file (Browse....) by clicking Upload request now.
Then click Download license update file now. Download the file and import it. To do this, go to CodeMeter Control Centerand click File -> Importlicense.

Then create a receipt by clicking License update -> Next -> Create receipt.
Upload this receipt file using the web page.
To do this, click Nexton the web page.
If you have already closed the web page, use the link given above and enter your Product Key once again. Then select Continue with license transfer.
Select the receipt file and click Upload receipt now.
Click OKto confirm. This completes license activation.

The license is now available again and can be used on another computer.

Question:

Although the server is not connected with the Internet, I would like to activate the license with the Product Key for the license server. What can I do?

Information:

The easiest way to activate and return Allplan licenses is to do this online. In other words, the server has Internet access. However, you can also activate your license on a computer without Internet access (offline licensing).

Requirements for activating a license offline:

• You have a valid Product Key.
• The license server is installed on the server. At least license server 2016-1-5 is installed.
  You can find detailed information on the version (Build-ID) at bottom on the left in the License Settings program.
• You have another computer with Internet access.

Important: Activating a license offline involves two steps. In addition, you need to upload a receipt file so that you can return the license offline later.

There are the following basic steps:

• Creating and uploading the license request file
• Downloading and importing the license update file
• Creating and uploading the receipt file

If you have several license server licenses, you need to do this for each license.

The online computer uses the following web page:
http://lc.codemeter.com/59885/depot/index.php



Note:

As both the license file and the receipt file are saved with the name of the container number by default, it may happen that you mix up these two files. Thus, we strongly recommend that you use meaningful names for the files. For example, include the word “license” in the name of the license file and “receipt” in the name of the receipt file.
This is particularly important if you want to activate several licenses offline.


Answer:

Activating licenses offline

To activate licenses, use CodeMeter Control Center.
Start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. An an alternative, go to the Windows search box and type Codemeter.

Select the empty Allplan CM6container (long number starting with 130; gray symbol).
If the container is not available, save the file attached to the C:\Program Files\Allplan GmbH\License Settings folder. Then open this file using the shortcut menu. This imports the empty container to CodeMeter Control Center.

Select the new, empty Allplan CM6 container and click Activate licenseon the right. Select Create license request. Create a *.WibuCmRaC file for this container.


Take this file to a computer that is online. Go to the following web page:
http://lc.codemeter.com/59885/depot/index.php

Enter your Product Keyin the “Ticket” line and click Next. You can now see your license. Click Activate license.

Next, select the Fimcode 6000100area on the right.

You can see your license with all available updates. Make sure everything is selected. Click Offline License Transferat the bottom on the right.

You can now upload the *.WibuCmRaC file (Browse....) by clicking Upload license request now. This creates your license, which you can download by clicking Download license update file now. Install this license on your server.

To do this, open CodeMeter Control Centerand click File -> Importlicense.


The activated license is now visible in the License settingsand can be used for the Allplan clients.


Finally, upload the receipt file.
To do this, open CodeMeter Control Centeragain and select the new Allplan CM6 container (with the number 130-XXXXXXX).

Then click License update -> Next -> Create receipt.
Create the receipt file for this container.
Upload this receipt file using the web page.

Take this file to the computer that is online. Click Nexton the web page.
If you have already closed the web page, use the link given above and enter your Product Key once again. Then select Continue with license transfer.
Select the receipt file and click Upload receipt now.
Click OKto confirm. This completes license activation.


Note:
After you have activated the license on the server, proceed as described in “Installing and configuring the license server”. You can find this guide here:
https://connect.allplan.com/en/faqid/20150618084450.html.


Returning licenses offline
You can return licenses in the same way:

• Creating and uploading the license request file
• Downloading and importing the license update file
• Creating and uploading the receipt file

Question:

How can I install and configure the hardlock license server?



Note:

You can find a PDF file with detailed instructions in the ..\Manual\<language> subfolder of the setup folder (see below). Below is a brief description of the most important steps.



Answer:

At the server

• The hardlock license server runs on the following operating systems: Windows 2000 Server, Windows 2000, Windows XP Professional or Windows 2003 Server. Although additional operating systems are possible, they are not approved officially. The 64-bit versions of the operating systems stated above require a special hardlock driver, which you need to install. To do this, follow this link:
  ftp://ftp.ealaddin.com/pub/aladdin.de/hardlock/hldrv32.zip
• You can find the license server setup on our FTP server:
  ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2005/Lizenzserver_2005.0c.zip
• Click 'setup.exe' to start installing the license server. You can choose any folder for the installation folder. Please connect the dongle to the server before you start installing.
• When the installation is complete, open the License Manager of the license server. The License Manager should not issue any error messages, and all the licenses should be displayed on the "Licenses" tab.

At the client

• You usually use the license of the license server to install the client. If the client has already been installed, you can also install this license later. To do this, open the Services application, click Utilities -> License -> Install HARDLOCK license.
• Next, you need to configure the License Manager of the client for the license server. To do this, open the Services application again, click Utilities -> License -> License Settings, and switch to "License server via RPC" in the "Licenses" area on the "General" tab. Finally, type in the computer name of the license server in the "Computer with license server service" box at bottom right and click "Apply". If you do not see an error message, the client is now connected with the license server. That's all!

Question:

How can the program "Codemeter Control Center" be installed manually.


Answer:

Exit Allplan.

A current and released version of "Codemeter Control Center" can be downloaded from the following link.

https://webdrive.allplan.com/s/4LrjrymoxESzC6p

The program is located in the folder.
/Allgemein/Wibu/

(Click on the three dots to the right of the file size and select download)


Start the file "CodemeterRuntime.exe" bypassing the user account control. To install, activate the file with the right mouse button and select "Run as administrator".
Confirm all messages in the setup, as well as the default settings with 'Next'.
Codemeter Control Center will then be installed.


Note:
If you are using an Allplan license server, the Codemeter Control Center program is not only available on every Allplan client, but also on the server running the Allplan license server.
Install Codemeter Runtime on your license server in the same way.
Please also note the following instructions for the license server.
https://connect.allplan.com/en/faqid/20200925120630.html

Note for Allplan 2018 Engineering customers:

Allplan Engineering Building Cubed and Allplan Engineering Civil Cubed

are offered under a new and simpler name going forward:

Allplan Engineering Cubed.

Customers will continue to have full access to all functionality of the specific engineering packages as usual.

Note:
The new uniform license will be available for existing licenses in May. If Allplan is not updating your license automatically you can do this manually also.

To update a license

License for a stand-alone workstation:

• Open the 'License settings' dialog box: Services application -> Utilities -> License settings
• Click License activationon the left. Then click the license you want to update.
• The 'Update license' button is no longer grayed out.
• Click Update license.

On the license server:

• Start the License Settingsprogram on the server.
• Click License activationon the left. Then click the license you want to update.
• The 'Update license' button is no longer grayed out.
• Click Update license.

Question:

You want to include a computer in the Allmenu via Workgroupmanager, but no network environment is displayed and no result appears when you enter the computer name in Search. How can the computer still be included?



Answer:

All computers included in the Workgroupmanager are stored in the data.cfg on the server in the central file storage request.
The Allmenu window shows the exact path of the "central file storage folder".

e.g. \\SERVER\data\Allplan
Go via Windows Explorer to the central file storage folder in the NET folder and open the file data.cfg (e.g. with the editor)

The content of the file looks like this
SERVER \data\Allplan

(So far no computer has been included and therefore there are no further entries in this example)

Here you can enter the new path of the computer to be recorded
Simply enter the computer name, spacebar, shared folder, subfolder as a new line.
Enter only your simple host name here, not the FQDN name (first name only, without periods and other additions)

Please make sure that all entries are flush with each other. Please do not remove the space bars in existing entries and also insert a space bar after the host name when entering, these are important.

So it looks like this

SERVER \data\Allplan
COMPUTERNAME \Nemdata\Allplan

Save the file.

As a result, the computers in the workgroup are displayed in the Allmenu/Services application under Workgroupmanager - > Administer projects and computers and can now be checked out.

Question:

How can I give individual users the right to see and select specific seats on the license server? And how can I deny users this right?
Sometimes, it may be necessary that a specific user does not see the seat with, for example, the terrain option so that this user cannot use this seat inadvertently.


Answer:

Using WebAdmin, you can give users rights for specific seats on the license server.
Please note the following points:

1. Before you start, check that at least CodeMeter Version 6.50 is installed on the license server.
Start CodeMeter Control Centeron the server.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen. Enter Codemeter and press ENTER. Select Help -> About to see which version of CodeMeter is installed. If the version displayed is older than version 6.50, you must install the latest version of CodeMeter Control Center. Go to the following website
and download the CodeMeter User Runtime for Windowsprogram.

https://www.wibu.com/de/anwendersoftware.html

2. Open WebAdmin. Start CodeMeter Control Centeron the server again.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen, enter Codemeter and press ENTER. A dialog box opens. Click WebAdminat bottom right.

Or
Enter Localhost:22350in the address bar of your browser.

3. Go to "Configuration -> Server -> License Access Permissions".
Select Mode: Advanced.

4. Go to "Advanced Mode Configuration -> Specific access rules -> Add Firm Code"and select "6000100 - Allplan GmbH". Click Add. "Specific access rules"now inlcude "6000100 - Allplan GmbH".





5. Click "Add Product Code"to select the seat for which you want to define access rights. However, this is only possible if the "Distinction based on Product Item Text" check box is selected.
The "Note" section below in this FAQ lists the abbreviations given at the end of each seat. These abbreviations represent the license contents.
Select the required seat and click "Add" again. Repeat these steps to assign more seats.





6. After having defined the product code, you can now assign an access rule.
By default, all users are allowedto access this seat.
Select the product code you just defined and click "Add new access rule".
Click "User" and enter the required user.
When you click in the field next to "User", you can see all available users with their domain names.
Select the user or enter the user manually. For example, enter DOMAINNAME\SSample and select the right you want to assign to this user by clicking "Allow" or "Deny".

If the default setting is "Allow", you can thus deny users access to the license. If the default setting is "Deny", you can thus allow users to access the license again.
You can add more rules. When you have configured all rules, click "Apply" to apply the changes.

7. You need to restart CodeMeter Service so that the changes take effect.
To do this, select CodeMeter Control Center -> Process -> Stop CodeMeterServiceand then click Restart CodeMeter Service.Before you restart the service, make sure all users have closed Allplan.


Information:

Client access can be defined by one of the following parameters: computer name, IPv4 subnet, user name or group name.
Enter the required parameter in the corresponding field. If you use an active directory, the program auto-completes entries in the "User" and "Group" fields.


Here comes a practical example:

Think about which setting is most useful to you. For example, you have two seats: seat 01 with 7 architecture licenses and seat 02 with 1 architecture license and 1 terrain license. Only two specific users should be able to use seat 02. If you want to deny all other users access to seat 02, you need to add seat 02 to specific access rules and define a rule for this seat 02. First, set the default setting to "Deny". Then, add these two users and select or "Allow" for these users. As a result, all other users can only see seat 01 and these two users can see seats 01 and 02.

However, if you want that these two users can only see seat 02, you need to add both seats to specific access rules and define a second rule for seat 01. Add these two users to this second role and select Deny for these two users. The default setting, which applies to all the other users, is still Allow. As a result, all other users can see seat 01 and these two users can only see seat 02.


Note:

The following abbreviations are used:

T Terrain
B Bamtec
W Workgroup
K Key Plan
M Bridge Modeler
L Cadastral plans for conduits
S Language option
V Visualization
A Architecture option
E Engineering option

Here are some examples:

Architecture:
"Allplan Architecture 2017”

Architecture + Terrain
"Allplan Architecture 2017 T"

Architecture + Bridge Modeler
"Allplan Architecture 2017 M"

Architecture + Terrain + Bridge Modeler
"Allplan Architecture 2017 TM"

Question:

How can I move NemSLock Server to a new server?



Answer:

Reinstalling NemSLock Server

• Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:
  ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

• Select one of the temporary license files for NemSLock server (for example, 1234567a_001_psd.nslsrv). These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
• When you opt for the “Custom” setup type, you can choose between the following program features:
  Console
  You can use this program to administer NemSLock Server. The console can be installed on several workstations. This way, you can administer the server from a number of different locations. However, you can only connect one console to the server at any one time.
  Server
  The actual license server.
  Logviewer
  This tool analyzes the log files of NemSLock Server.
  User List Generator
  You can use this tool to create the users for NemSLock Server from a text file or based on a server.
  By default, Setup installs all these features.
• If your license includes configurations for several seats, you need to install the additional temporary license files for NemSLock server after the installation (see below).

Transferring the user administration from the old server (if users are available)

• You can find the user administration in the program folder of the license server. Copy the "users.mcf" file to the program folder of the new license server.
• Stop the license server service on the new server before you copy the file. To do this, start the "stopService.bat" program, which is also in the program folder of the license server.
• After copying, start the license server service again. To do this, use the "startService.bat" program.

Returning the registered licenses

• Open NemSLock 2006 Server Console on the old server by clicking the icon on the desktop or Start -> (All) Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
• Click "Stop server".
• Click "Modules".
• Click "Transfer license permanently".
• Confirm the following dialog boxes. Click “Browse”.Windows Explorer starts and opens the folder with the hcws-format file. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.Send this file by email to register@nemetschek.de.
• We will send you an email, confirming that we have received the licenses.
• You always have to return all licenses.
• After you have done this, they are only valid for two more days.

Registering the license(s) on the new server

• Open NemSLock 2006 Server Console on the new license server.
• Click "Modules" on the left.
• Select the seat you want to register. If your license contains configurations for several seats, read the notes further down.
• Click "Registration request (register.txt)".
• Click "Edit".
• Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
• Click "Create registration request".Windows Explorer starts and opens the folder with the "register.txt" file. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.Send the registration request by email to register@nemetschek.de.

If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.

How to install licenses

• Open NemSLock 2006 Server Console.
• Click "Stop server" on the left.
• Click "Modules" on the left.
• Click ”Browse” to navigate to the registered license file.
• Click "Install license file".
• After this, you can start the server again by clicking "Start server".

Configuring the clients

• Now you need to change each client to the new license server.
• Click Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
• If the license server window is hidden, click "Configure NemSLock Server"at the bottom. It is a good idea to lock this window. All you need to do is click the drawing pin icon.
• Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
• Now the user can select one of the seats provided. Click "Close" to complete the configuration. Now you can start Allplan.
• After having successfully connected to the license server, clear the check boxes for the trial licenses in the area at the top.

Notes:

• If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
• 2014-1 and later: If the latest version of License Manager is installed (file version 1. 0. 26. 153 or later, see License Manager- Options- System), you can also select several licenses. If one of the selected licenses is currently being used by someone else, the program will automatically select the next available license.
• Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
• The license server and the licenses are downward compatible; they can be used in conjunction with older Allplan versions.

Question:

I can neither check in nor check out the computer.
When I try to check in the computer, the following error message appears: “The registry entries are not correct!” How can I correct this error?


Answer:

There is a hidden file on the server. This file causes the problem, which is probably related to user rights or user account control.

You have to change the settings directly on the server, that is so say, you have to use the folder options to show all hidden folders and files.

1. Open the central file storage folder on the server. There is a subordinate folder called
NET. This folder contains the computer_name.out file. Here, computer_name is the name of the computer that is checked out.
Delete this file.

2. Open the shared folder (for example, C:\Nemdata\Allplan) on the computer that is checked out.
Allplan 2015 and earlier: Delete the Net.ChkOutfolder.
Allplan 2016 and later: Delete the NETfolder.

Now the computer is checked in again. Consequently, you can move projects to this computer
or check it out once more.


Note:

If the computer or the projects are still red, you have to fix the projects.

To fix the projects:
Services application -> Workgroup Manager -> Administer projects and computers

Do the following:

Ctrl + right-click computer-> can be checked in
Ctrl + right-click project-> can be unlocked

Repeat this step to unlock every project on the computer.
When you have finished, close the dialog box and open it again to update it.
Now everything should be correct.

Question:

What license issues do I need to consider when upgrading from Allplan 2017/2018/2019 to Allplan 2020?


Answer:

Installation options during Setups

First-time installation with copying data (default): this option copies and converts the data of the previous version to the new version. You can choose to transfer projects, too. This option does not change the previous version.
Upgrade: this option also transfers the data to the new version. However, you can no longer use the previous version after upgrading.
First-time installation: this option installs Allplan 2020 parallel to the version you are running. However, your data will neither be transferred nor converted. You can find more information in the help. Just press F1 during Setup.


Depending on the licensing system you use, you need to consider different points.

1. Upgrade Allplan 2020 – stand-alone workstation

The license for Allplan 2020 updates automatically. Start Setup and follow the instructions displayed. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.

Note: The licenses only update automatically when you upgrade. To install Allplan 2020 on a new computer, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Transferring license to a new computer.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license

2. Upgrading Allplan 2020 with a license server

Start by updating your license(s) at the license server. After this, upgrade the clients. To do this, start the License Settings program on the server. Click License Activation on the left, and then click the license you want to update. Click Update License.

After updating your license(s) you can upgrade Allplan at the clients. Start Allplan Setup and follow the instructions displayed. The license server license will be detected automatically on the network. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.

NOTE: If your license server displays a detailed version number (build ID) directly in the lower left corner of the program License Settings, it is usually compatible with the new version and does not need to be updated. You only need to update the license(s).
If you still want to update your license server, download the software for the license server from the Allplan Connect service portal. Detailed instructions can be found at connect.allplan.com/license under the menu item Information on installation and Licensing' and the instructions 'Updating license server and licenses'.

Note: You can update the licenses only at a license server you have already installed. If you want to switch to Allplan 2020 and move the license server to a new server, please read on
connect.allplan.com/license within the menu item Information on Installation and Licensing the
instructions Moving license server to a new server.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license


Downloading licenses from Allplan Connect
You can also obtain your activation codes for Allplan 2020 IBD in the Allplan Connect service portal.
To do this, click Profile > License Management.

You can only use this function as an administrator.


License for Allplan Allfa 2019
You will get your license by mail from customercare@allplan.com. So that we can create the license for you, please send us your IP address or the Host ID of the Allfa database server (Oracle).

Question:

I want to run Allplan on a terminal server. Can I use any other terminal server than Citrix?



Answer:

Microsoft terminal server or Horizon is not approved for Allplan.
In addition, running Allplan on a terminal server requires an Allplan license server for managing the Allplan licenses.
If you have only used stand-alone licenses until now, you must purchase the additional ‘license server’ option. Should you have any questions, please contact your sales partner.


VM Ware (Horizon) or RDP is not approved for Allplan. This means that you do not get any support for this constellation.
You may not have any problems with the current Allplan version. However, future developments will not take RDP or VM Ware into account. Consequently, this functionality may be limited or not available at all in future Allplan versions.

Citrix is the only terminal server that is approved for Allplan.
You can find information at
https://connect.allplan.com/de/support/sysinfohttps://www.allplan.com/de/system/systemvoraussetzungen/

Question:

What might cause Allplan not to function correctly in a Microsoft remote desktop environment?
And what can I do to solve these problems?



Answer:

Running graphic-intensive software in a Microsoft remote desktop environment might be restricted because GPU rendering is turned off for Microsoft remote desktop by default. You can solve problems by configuring the Windows local group policy on the host so that GPU rendering is turned on during a remote desktop session.

Important notes:

• It is the IT service provider or office administrator who is responsible for configuring the Windows local group policy. This is not part of the support services provided by Allplan’s technical support.
• In this context, Allplan’s technical support does not assume any responsibility for possible problems you might have with your computer.
  
  

To configure the local group policy, do the following:
Start the local group policy editor in Windows: Start -> Run -> gpedit.msc

Local group policy editor starts.

Select the path in the area on the left: Local computer policy -> Computer configuration -> Administrative templates -> Windows components -> Remote desktop services -> Remote desktop sessions host -> Remote session environment -> RemoteFX for Windows Server 2008 R2.

Turn on the following settings in the area on the right:

1) “Configure RemoteFX“

2) “Optimize visual experience when using RemoteFX”

3) “Optimize visual experience for remote desktop service sessions”

Do not change the other predefined parameters in the dialog boxes.

Select the path in the area on the left: Local computer policy -> Computer configuration -> Administrative templates -> Windows components -> Remote desktop services -> Remote desktop sessions host -> Remote session environment.

(This is the folder superior to the one selected beforehand.)

Turn on the following settings in the area on the right:

1) “Use hardware graphics adapters for all remote desktop services sessions”

2) “Configure compression for RemoteFX data”

Do not change the other predefined parameters in the dialog boxes.

Restart the host to apply the new local group policy settings. Afterward, you can use the GPU of the host.

Question:

How can I switch the license server from hardlock to NemSLock?



Answer:

• If you have not yet requested the switch, please send a short email to "nemslock@nemetschek.de". Describe your request briefly and include your customer number and the seat number(s) you want to switch. Bear in mind that switching may take up to two working days.
• Before you install, check whether you have all the necessary files:
• At least one temporary license for NemSLock Server, for example: 1234567a_001_psd.nslsrv
• At least one temporary license for the client, for example: 1234567a_001_psd_client.nslock
• You can download the Setup program from our FTP server:
  ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2012/Allplan2012-nemslock12.zip
  

How to install NemSLock Server

• Start the Setup program for NemSLock Server.
• Select one of the temporary license files for NemSLock Server. These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
• If you received several license files, use the Server Console to install these additional licenses as described in the section entitled "How to install licenses".
  

How to register licenses

• Open NemSLock 2006 Server Console by clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
• Click "Licenses" on the left.
• Select the seat you want to register. If your license contains several configurations, please see the notes further down.
• Click "Registration request (register.txt)".
• Click "Edit".
• You must fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
• Click “Send”. The standard email program installed on your computer opens, and the registration file is attached to the email.
  Send this email with the registration request to the following address: register@nemetschek.de.

Notes:

• If the email program does not start or you computer does not have Internet access, you can also send the register.txt file manually to Allplan. Click “Browse”. Windows Explorer starts and opens the folder with the registration file. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.
• If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.
• The registered licenses you receive by email are valid for 14 days, starting from the day of registration. Please return the dongle within this period of 14 days. As soon as we have received the dongle, we will send you the unlimited licenses.

How to install licenses

• Open NemSLock 2006 Server Console.
• Click “Stop server” on the left.
• Click "Modules" on the left.
• Click ”Browse” to navigate to the registered license file.
• Click “Install license file”.
• You can then start the server again by clicking “Start server”.

How to set up users
You do not need to enter a user for the license server version on the Allplan 2009 (Build 50) DVD or later. In this case, every user can do everything: retrieve licenses, check out licenses and manage data using the console. If you want to limit these options or if you are working with an older version of NemSLock Server, you need to set up users.

There are two options: Both options are described in detail in "Installing and configuring NemSLock Server". This section shows how to use the Server Console to set up users directly.

• Open NemSLock 2006 Server Console.
• Click “Users” on the left.
• Create a new user by clicking the “New user” button. In addition to the Windows user name, you need to enter a description of the user. You can also assign administrator privileges for the license server to the user and grant him/her the right to temporarily export licenses from the license server. Furthermore, you can limit the seats the user can select. To do this, click "Seats". Otherwise, the user can select any license.

Be careful:

• As long as you have not appointed an administrator, each user can manage the license server using the console, including users who are not entered in the console.
• The Windows user "administrator" is not a special user; in other words, when one or more users have been appointed administrators, this user can no longer start the console for this license server.
• Only registered users can retrieve licenses from the license server using a client.
• You can enter users in the “Users.mcf” file. If the license server service is terminated, the file deleted and the service started again, each user can again use the console to manage the license server.

How to install and configure clients

• Use one of the nslock license files you received to install the clients. Do not use the trial license or the license server license. It is irrelevant which of the client licenses you use, as the actual license will come from the license server later.
• You do not need to register the clients.
• When switching from Hardlock to NemSLock (server), you need to update the client using a nslock license file.

After having installed the client, you need to switch to the license server:

• Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
• If the license server window is hidden, click "Server" at the bottom. It is a good idea to lock this window. All you need to do is click the drawing pin icon.
• Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
• Now the user can select one of the seats provided. Click "Close" to complete the configuration. Now you can start Allplan.

Notes:

• If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
• Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
  

How to return the dongle
Return the dongle as agreed. As soon as we have received the dongle, we will send you the unlimited server licenses by email. Use the Server Console to install these licenses on the license server as described in "How to install licenses".

Question:

How to update the license server and the licenses?



Answer:

Allplan 2016: Before you do anything, make sure Allplan 2016-1-4 or later is running on all clients.
Allplan 2017 and higher: Check the version of the license server as described below and update the licenses.

1. Updating the license server
Check the version of your installed license server on the server. Starting with the license server version 2016-1-4, the detailed version status (Build-ID) is displayed directly in the lower left corner of the License Settings program.
The latest version 1.11xx.xxx.xxx should be displayed here. If an older Build ID is displayed, then you still have an older license server in use. In any case, please update your license server. Download the software for the license server from Allplan Connect - license server version 2021 or from the following link.

https://webdrive.allplan.com/index.php/s/4LrjrymoxESzC6p

The package is in the folder

/Allplan/Lizenzserver/2021/

Start the new License Server Setup on the server or computer you use as the license server. Right-click the *.exe file and select 'Run as administrator' on the shortcut menu.

• Click Install.
• Click Exit.
  

If you have not yet installed the license server or if you have not switched to Allplan 2016 or higer until now, you can find detailed step-by-step instructions at
https://connect.allplan.com/en/faqid/20150618084450.html


2. Updating the licenses
Update the licenses at the license server as follows:

• Start the License Settingsprogram on the server.
• Click License activationon the left. Then click the license you want to update so that this license is highlighted in blue.
• As you can see, the 'Update license' function is now available.
• Click Update license.
• If your license includes configurations for several seats, you must update each license separately.
  
  

Note: When updating the license it can be that you will receive a higher version of the license as the version of Allplan you are using. The license is downward comatible and can be used until Allplan 2016.

Question:

Allplan does not start. When you open license selection in the license settings, you can see the following message: "Cannot find a license for running Allplan." Sometimes you might also see one of the following error messages: "This license is no longer available", "CmActLicense runtime system is not installed!" or "NemAll_DataResource20.dll: Start Error 102". Allplan no longer starts after these messages. How to solve this problem?

Answer:

Check the following points:

On the client:

Open the license settings: Services application -> Utilities -> License settings

1. Has the license been blocked on the client?
Check the 'License selection' area to find out whether your license has been blocked. This is indicated by the symbol. If the license is blocked, Allplan cannot use it.
Click this symbol to unblock the license again. If you want, you can select the check box in front of the license to select it as a favorite. Allplan will then prefer this license.
If you do not select any license or if you have selected several favorites, Allplan will automatically use the first free license it finds.


2. Has the server been found?

Select the 'Find license server automatically' option. You should now see the license provided by the server.

Note: In some cases, such as VPN connections, Allplan may not be able to detect a server automatically. In this case, you can enter the server manually.


3. Is the local Windows service, which is used by licensing, running correctly?

If communication with the local Wibu service is blocked, Allplan cannot find the license anymore. This is often caused by the virus scanner.
So you need to exclude the "Codemeter" folder from virus scans. You can find this folder in the following path: C:\Program files (X86)\Codemeter or C:\Programme (x86)\Codemeter

Then restart the service:

Start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen and enter Codemeter.

CodeMeter Control Center -> Process -> Start CodeMeter Service
If the service is running, stop it and restart it.


On the license server:

4. Is the 'Start network server' option active?

Start CodeMeter Control Center on the server.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen, enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.

Or
Enter Localhost:22350in the address bar of your browser.

• Select Settings -> Server -> Access serverin the Network serverarea and click Activate.
  

Update the license settings on the client. To do this, click Updateor open the dialog box with the license settings again. You should now see the license on the client.


5. Restart the license server service on the server

To start and stop the license server service, you can use CodeMeter Control Center.

• CodeMeter Control Center -> Action -> Stop CodeMeter Service
• CodeMeter Control Center -> Action -> Start CodeMeter Service

Update the license settings on the client. To do this, open the dialog box with the license settings again. You should now see the license on the client.


6. Is the virus scanner blocking the Windows service, which is used by licensing, at the server?

If communication with the Wibu service is blocked, Allplan cannot find the license anymore. This is often caused by the virus scanner.
So you need to exclude the "Codemeter" folder from virus scans.
You can find this folder in the following path: C:\Program files (X86)\Codemeter or C:\Programme (x86)\Codemeter
In addition, exclude the C:\Program Files\Allplan GmbHfolder.

Then restart the license server service:
If the service is running, stop it and restart it.


7. Check the firewall

Allplan communicates with the license server via TCP/IP. By default, communication is via port 22350 unless you change the port in CodeMeter WebAdmin. So you need to configure the firewall accordingly.

If a firewall is active on your computer, you must enable port 22350 for TCP and UDP. If the firewall filters in an application-specific manner, you have to enable the CodeMeter.exe license server service. You can find this service in the %Program Files (x86)%\CodeMeter\Runtime\bin Windows folder. Define the CodeMeter.exe service as an exception in the firewall. Some anti-virus programs also include firewall functions. If you are not sure, contact the manufacturer of the anti-virus program.

Question:

How can I switch the license server from hardlock to NemSLock?



Answer:

• If you have not yet requested the switch, please send a short email to "nemslock@nemetschek.de". Describe your request briefly and include your customer number and the seat number(s) you want to switch. Bear in mind that switching may take up to two working days.
• Before you install, check whether you have all the necessary files:
• At least one temporary license for NemSLock Server, for example: 1234567a_001_psd.nslsrv
• At least one temporary license for the client, for example: 1234567a_001_psd_client.nslock
• You can find the current setup on our FTP server:
  ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

How to install NemSLock Server

• Start the Setup program for NemSLock Server.
• Select one of the temporary license files for NemSLock Server. These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
• If you received several license files, use the Server Console to install these additional licenses as described in the section entitled "How to install licenses".

How to register licenses

• Open NemSLock 2006 Server Console by clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
• Click "Modules" on the left.
• Select the seat you want to register. If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.
• Click the "Registration request (register.txt)" button.
• Click "Edit".
• Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
• Click "Create registration request". Windows Explorer opens and shows the register.txt file. If this window is closed, you can find this file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is:
  C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License
• Now you can use all the options provided by Windows Explorer to copy the registration file to a computer with Internet access on the network. Alternatively, you can also use an USB stick. You can then email this file to us.
• Send the email with the registration request to register@nemetschek.de

How to install licenses

• Open NemSLock 2006 Server Console.
• Click "Stop server" on the left.
• Click "Modules" on the left.
• Click "Browse" to navigate to the registered license file.
• Click "Install license file".
• After this, you can start the server again by clicking "Start server".

How to set up users (optional)

• predefined user ALLis created automatically. If there is no other user, each user is given the privileges of the user ALL. By default, this user can use all licenses but cannot check out any licenses. By double-clicking the user, you can change the user's privileges.
• predefined user ALLallows all users to use licenses. In order to do this, the users must be able to access the server. You do not need to create individual user profiles until you want to assign specific rights to individual users or limit access to selected users. predefined user ALL. If you want to work only with individual users, you should deactivate the predefined user ALL by revoking the user's right to use licenses.
• predefined user ALL has administrator privileges unless another user is created and appointed as the administrator. As soon as you have appointed an administrator, ALL no longer has administrator privileges.
• You can enter users in the “Users.mcf” file. predefined user ALL has administrator privileges again. In addition, each user can once again administer the license server using the console.
• The administrator user is not a special user. If there are several administrator users, only one administrator user can start the console for this license server at any one time.
• If you are setting up users without giving administrator privileges to anyone, the program will ask you whether you want to appoint yourself as the administrator.

You can also specify a domain (user authentication for Windows server). However, this is not mandatory. If you do not specify a domain, the program uses the Windows user name for each user.

The program writes the user accounts and the associated access rights as ASCII text to the users.mcf file.

You can find this file in the \Programs folder of the NemSLock Server installation. You cannot rename, delete or move this file. If the program can no longer connect to this file, you must exit NemSLock Server, restart it and enter all users again from scratch. predefined user ALLis retained.

Note:
Experienced administrators can use the PowerShell script NemGenUsers.ps1. This file is in the \Programs folder of the NemSLock Server installation or you can find it as an FAQ in Allplan Connect:

connect.allplan.com/en/faqid/20120907161911.html


How to install and configure clients

• Use one of the nslock license files you received to install the clients. Do not use the trial license or the license server license. It is irrelevant which of the client licenses you use, as the actual license will come from the license server later.
• You do not need to register the clients.
• When switching from Hardlock to NemSLock (server), you need to update the client using a nslock license file.

After having installed the client, you need to switch to the license server:

• Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
• If the license server window is hidden, click "Server" at the bottom. It is a good idea to lock this window. All you need to do is click the drawing pin icon.
• Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
• Now the user can select one of the seats provided. Click "Close" to complete the configuration. Now you can start Allplan.
• After having successfully connected to the license server, clear the check boxes for the trial licenses in the area at the top.

Notes:

• If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
• Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
• The license server and the licenses are downward compatible; they can be used in conjunction with older Allplan versions.
  

How to return the dongle
Return the dongle as agreed. As soon as we have received the dongle, we will send you the unlimited server licenses by email. Use the Server Console to install these licenses on the license server as described in "How to install licenses".

Question:

How can I use NemSLock license server to check out a license for a computer that is not on the network?



Answer:

Running a Nemetschek Allplan program with a NemSLock 2006 Server license on a computer that is not connected to the network
requires the following steps:

1st Use the computer that is not connected to the license server to create the computer ID file.

To use a network computer to create a server license for a computer that is not connected to the license server,
you first need to create the computer ID and save it in a file.
Note: The computer ID file expires when you make more than two changes to the hardware components
. After more than two changes (for example, new/additional hard disk, new DVD/CD drive),
you need to create a new computer ID file.
Note: After having upgraded from versions that are earlier than Allplan 2009, you need to create a new computer ID file for transferring licenses to computers
that are not connected to the license server as the extension of the computer ID file has
changed.

2nd Use a computer that is connected to the license server to create the import license for the computer that is not on the network.

This requires the computer ID of the computer that is not connected to the license server.
In addition, the user who creates the license at the computer that is connected to the license server must be authorized
to import licenses.

3rd Use the computer that is not connected to the license server to import the license file from the server

You can use this import license to run the relevant program on the computer that is not connected to the license server
until the time limit specified expires. However, you can also return the import license before the time limit expires
by exporting the license to a file.



Note:

Advanced information on these three points can be found in the help for NemSLock License Manager.
Open the help and switch to the 'Index' tab.
Enter the following search term: Server licenses for third computer

Question:

Which license files can I download from Allplan Connect and what do I need to consider?



Answer:

Allplan Connect provides current and earlier licenses for Allplan (single seat and NemSLock license server), for Allplan BCM and activation codes for the IBD wizards.

If you require licenses for the hardlock license server, please send an email to: logistik-center@nemetschek.de

The licenses are sorted chronologically by Allplan version and seat number.

Always use the current license even if you work with an earlier version.


Assignment is as follows:

• NemSLock pseudo -> temporary license (Allplan with NemSLock)
• NemSLock Server pseudo -> temporary license (Allplan with NemSLock license server)
• Hardlock -> license (Allplan with dongle)

The earlier licenses are only listed for the sake of completeness and should only be used if you have problems with the current licenses.

Depending on the licensing system you use, you need to consider different points.



Allplan with NemSLock

You can download the temporary license for Allplan, which is only necessary for installing Allplan on a new computer.

Note:
You can use the current NemSLock license to install all Allplan versions down to and including Allplan 2006.

• Upgrading an existing seat

The license updates automatically. Insert the DVD into the drive and follow the instructions displayed.
Click 'Existing license file' when you are prompted to select the license file.
If hardware components have changed since the last registration, you need to register again.
In this case, the wizard for creating a registration request starts automatically during installation. Please send this request to the address given and wait for the new license file, which you will get by email. Use this license file for installing.

• New installation on a new computer

The licenses only update automatically when you upgrade. To install Allplan on a new computer, please read the following instructions:
https://connect.allplan.com/de/faqid/20110223160914.html

Note: If you have registered your license for a different computer, you need to return it in advance.
https://connect.allplan.com/de/faqid/0003f546.html



Allplan with NemSLock license server

You can download the temporary license for NemSLock license server and the client license, which are only necessary for installing NemSLock license server or an Allplan seat on a new computer.

• Upgrading existing seats with NemSLock license server

First you need to upgrade the licenses at the license server by registering the licenses again and installing the new, registered license files. Before upgrading the client, you need to select the new license using License Manager so that it is found by the Setup program. You can then run Setup.
For detailed instructions, go to:
https://connect.allplan.com/de/faqid/20120816152004.html

• New installation on a new computer

To install NemSLock license server on a new computer, please read the following instructions: If you want to install a new seat that accesses NemSLock license server, only the last chapter is of relevance ("How to install and configure clients").
https://connect.allplan.com/de/faqid/20121121115347.html

Note:
If you have registered NemSLock license server for a different server, you need to return the license in advance.
https://connect.allplan.com/de/faqid/20121210111844.html



Allplan with dongle

You can download the license for Allplan, which is only necessary for installing Allplan on a new computer.

The Allplan license updates automatically when you upgrade. Insert the DVD into the drive and follow the instructions displayed. Click 'Existing license file' when you are prompted to select the license file.
If the system issues a message prompting you to enter an activation code or announcing that the license is not valid, please contact technical support.

To install a hardlock license, please read the following instructions:
https://connect.allplan.com/de/faqid/0001ca5a.html


Allplan with hardlock license server
You do not need to update the license files, which are only necessary for installing Allplan or the hardlock license server on a new computer.
If you require new licenses, please send an email to: logistik-center@nemetschek.de
To install the hardlock license server, please read the following instructions:
https://connect.allplan.com/de/faqid/20090122092716.html



Allplan BCM

You can download the final license for the current version of Allplan BCM.
To install a BCM license, please read the following instructions:
https://connect.allplan.com/de/faqid/a00002166.html




Allplan IBD wizards

You can download the activation code for the current version of the IBD wizards you have purchased.
If you require activation codes for earlier IBD versions, please contact technical support.

Question:

How can I move the "central file storage folder" of an Allplan installation to a new server?



Note:

The procedure described below is not approved by Allplan. Do this at your own risk.
You are strongly advised to clarify all issues in advance.
If you are not sure what to do, we recommend that you uninstall and reinstall Allplan or consult technical support.
Always copy a file before you change it.



Answer:

A. General information
Copy the "central file storage folder" from the old server to the new server.
You can find this folder under a shared folder.
Create the same folder structure and share (including the share name) on the new server, making things easier for you. However, this is not mandatory.


B. Allplan installation with Workgroup Manager

1. Changes on the server
Enter the new server name in the following files on the new server. You can find these files in the NET folder, which is a subfolder of the central file storage folder. You can open the files in an editor and edit them there.

data.cfg
· Enter the server name in CAPITAL LETTERS (also applies to user.cfg and project.dat!), for example, SERVER.
· Do not delete the blanks after the server name.
· If the share name or folder name has changed, you need to enter the new name after the blanks.

user.cfg
· Since Allplan 2014 this file is encrypted and is saved in ANSI format
· Open the files with editor. After the = change the server name to new name, use CAPITAL LETTERS (without any blanks).
· When finished click on file in the left top and chose save file as
· File name: user.cfg
· File type: text file (*.txt)
· Encyryption(Coding): ANSI
· Save

Note: if the server name is not shown in user.cfg please contact us again by sending your fuser.cfg and the new server name.

project.dat
· Rename the "project.dat.xml" file "project.alt.xml".
· Then go to step "2. Changes on the workstations". Complete the process for one workstation!
· When you have finished, do the following:
Services application -> Service -> Hotline Tools -> reorg -> Restore project management file -> OK


2. Changes on the workstations
On each workstation, you must adjust a value using the registry editor.

Switch to the following key:


HKEY_LOCAL_MACHINE\Software\Nemetschek\Allplan\'version number'\InstallRoot


In the "NetDrive" value, enter the new server name and the new share name, for example, \\SERVER\Nemdata.
In the "NetPath" value, enter changes in the subfolders, for example, \Nemetschek\Allplan.
Together NetDrive and NetPath define the valid path of the "central file storage folder" on the new server, for example, \\SERVER\Nemdata\Nemetschek\Allplan.


C. Allplan installation without Workgroup Manager
If Workgroup Manager is not installed, use the procedure described in B. You can ignore step "1. Changes on the server".


D. In addition: check the licensing system you are using!

Standalone license:
If you run Allplan using standalone licenses, there are no particular issues to bear in mind.

Wibu license server:
If you want to use the license server also on the new server, you need to return the license on the old server. Install license server on new server and activate the license on the new server again. You can find detailed instructions at:
https://connect.allplan.com/en/faqid/20150618134224.html


Note: If you want to create an image of the server or virtualize the server, please contact the technical support team.

Question:

How can I borrow a license for a client temporarily from the license server?



Answer:

Hotfix 2016-1-4 enables you to temporarily borrow (import) licenses from the license server.
If you want to use this function, note the following points:


Borrowing licensesrequires the following steps. Make sure you do not change the order of these steps. Otherwise, you cannot borrow licenses.

1. Install Allplan 2016-1-4on the client.
2. Go to the server and update the software for the license server to 2016-1-4(Build-ID 1.614.x.x ).
3. Go to the license server and update the licenses.

You can find a detailed description of each step in the following section.

1. Install Allplan 2016-1-4
Make sure all clients are equipped with Allplan 2016-1-4 or later.
If this is not so, install a full update or a hotfix. You can do this manually or use auto-update.
You can find more information in Allplan Connect:
https://connect.allplan.com/en/faqid/20110412100857.html

To install manually
Download the current hotfix(es) manually. To do this, log in to Allplan Connect https://connect.allplan.com/de/support/downloads.htmlad go to Support - Downloads - Latest Hotfixes.
You can also download the hotfixes from our FTP server.
To access our FTP server, you require a current Windows operating system. Do the following:

Enter the following address in Windows Explorer (do not use Internet Explorer!):
ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de

You can find the hotfixes in this folder: /download/Allplan/2016/Hotfix/


2. Update the license server 2016-1-4(Build-ID 1.614.x.x )
Not only Allplan but also the license server requires the new version. Check the version of the license server. You can find detailed information on the version (Build-ID) at bottom left in the License Settingsprogram.
Make sure the version of the license server you use is at least 1.614.x.x. If you cannot see the Build-ID, you work with an older license server.
If this is so, update the license server. Download the software for the license server from Allplan Connect or from our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2016/DoWn-2016-License_Server_Setup.zip

Start the new License Server Setupon the server or computer you use as the license server. Right-click the *.exe file and select 'Run as administrator' on the shortcut menu.

• Click Install.
• Click Exit.
  

If you have not worked with the license server before or if you have not switched to Allplan 2016 until now, you can find detailed information in Allplan Connect:
https://connect.allplan.com/en/faqid/20150618084450.html


3. Update the licenses
You must update your license before you can use this new function for borrowing licenses.

To update a license on the license server

• Start the License Settingsprogram on the server.
• Click License activationon the left. Then click the license you want to update so that this license is highlighted in blue.
• As you can see, the 'Update license' function is now available.
• Click Update license.
• If your license includes configurations for several seats, you must update each license separately.

To borrow a license, do the following:

Notes:
You cannot borrow licenses on the license server. You can do this only at the clients.
You can only borrow and return a license if the client is connected with the license server.
Computers that are not on the company network must use a VPN connection to access the server.

At the client:

• Open the 'License settings' dialog box: Services application -> Utilities -> License settings.
• Click License selectionon the left. Then click the license you want to borrow so that this license is highlighted in blue.
• If this license is a license of the license server, the Todaybutton in the 'Borrow license for:' area is no longer grayed out.
• This button always shows the preset period of time. The default setting is Today.This button is divided into two parts. If you want to change the period of time, click the arrownext to Today. You can now choose from various options.
  Note: When you select 'Today', the license will be available again for all Allplan users on the server tomorrow.
  When you select a number of days, borrowing will always be valid for 24 hours. For example, you borrow a license for 1 day and borrowing starts at 3 o'clock in the afternoon, the license will not be available on the server until 3 o'clock in the afternoon.
• Click Today(selected period of time) to borrow the license immediately.

You can immediately see the borrowed license in the license selection below your computer name. Click the blue information button to get details about this license. For example, you can see when the borrowed license will automatically be returned to the server.

• If you want to return the license to the server before the time period expires, click the license again so that it is highlighted in blue. The Return licensebutton is now available. Click Return licenseto immediately return the selected license to the server.

Question:

After updating Codemeter Runtime on the server, the client computers do not receive a license from the license server anymore.
How can this be fixed?


Answer:

Please check if the setting for visibility of licenses in the network is still set.
Proceed as follows:
Start the CodeMeter Control Center on the server

To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen: enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.

Or
Enter Localhost:22350in the address bar of your browser.

• Select Configuration -> Server -> Access server in the Network server area and click Activate.
• Click Apply.

Question:

How can I move the license server to a new server?



Answer:
If you activated the license(s) online by entering a Product Key, you can return the license(s) and then use them on a different server. You can return licenses only if the server has Internet access.


Returning a license

To return a license in online mode

• Start the license server by opening the License Settings.
• Click License activationon the left. Then click the license you want to return.
• Click Return license.
• Do this for each license until you have returned all licenses.

You can now activate the license(s) on a different server.


To install the license server on the new server, download the software for the license server from Allplan Connect.
You can activate a license in online mode only if you have ...

• Internet access
• a Product Key

Installing the license server on the new server

• Start License Server Setupon the new server.
• Click Install.
• Start the license server by starting the License Settingsprogram. Go to the License activationarea, enter your Product Key and click Activate license.
• If you have more licenses for the license server, enter the respective Product Keys and activate the licenses.
• Afterwards, start CodeMeter Control Center.
  To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen, enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.
  
  Or Enter Localhost:22350in the address bar of your browser.

• Select Settings -> Server -> Access serverin the Network serverarea and click Activate.
• Click Apply.

Configuring the clients

The license server license will be detected automatically on the network; the clients display the license(s) provided by the new server.

Check the license selection in the license settings of the client:

Services application -> Utilities -> License settings -> License selection

Priority:
Select the check box in front of a license to select this license as a favorite. You can mark as many licenses as you want. Allplan will then prefer these licenses. Click to select one ore more licenses Allplan is not to use. If you do not select any license or if you have selected several favorites, Allplan will automatically use the first free license it finds.

Find license server automatically:
When you select this option, Allplan automatically detects a license server on the LAN. In some cases, such as VPN connections, Allplan may not be able to detect a server automatically. In this case, you can enter the server manually (see additional server name).
Note:Only the Windows administrator can change this option.

Additional server name:
If 'Find license server automatically' is not active or Allplan has not automatically found a license server, you can manually enter the name or the IP address of the server. If 'Find license server automatically' is active, you can enter an additional server. After having entered the server name, click Updateto see the licenses of the license server. Use semicolons to separate several server names.


Notes:

You can find detailed information on the license server in the License Settings help (F1 key).

Allplan communicates with the license server via TCP/IP. By default, communication is via Port 22350unless you change the port in CodeMeter WebAdmin.

If a firewall is active on your computer, you must enable port 22350 for TCP and UDP. If the firewall filters in an application-specific manner, you have to enable the CodeMeter.exe license server service. You can find this service in the %Program Files (x86)%\CodeMeter\Runtime\bin Windows folder. Define the CodeMeter.exe service as an exception in the firewall. Some anti-virus programs also include firewall functions. If you are not sure, contact the manufacturer of the anti-virus program.