Information:

This document provides further information on installing Allplan 2019.

Backing up and archiving data:

We strongly recommend that you back up and archive all your data before you upgrade to Allplan 2019.


How to install


You can find detailed instructions on how to install Allplan 2019 in the following places:

- After you have downloaded and unzipped Allplan 2019, you can find the ‘install.chm’ file in the following folder: C:\Users\Public\Documents\Allplan 2019\HelpFiles\English.

- Use the following link:
https://webdrive.allplan.com/s/4LrjrymoxESzC6p and open the General\Installation help\2019 folder.


Please read these instructions before you install Allplan 2019.

System requirements for Allplan 2019

https://connect.allplan.com/en/faqid/20180608093815.html

How to handle licenses when upgrading to Allplan 2019

https://connect.allplan.com/en/faqid/20180608092654.html



Some notes on installing Allplan 2019

If you want to switch from Allplan 2016/2017/2018 to Allplan 2019, you can choose between three installation options. We recommend using the second option: first-time installation and copy data from Allplan 2016/2017/2018.

1. First-time installation

This option installs Allplan 2019 to a new folder without affecting any other Allplan installation (2018 or earlier). Setup does not transfer any data or settings to the new installation.

If you want to transfer data later, you have the following options:

You can uninstall Allplan 2019 and then upgrade from Allplan 2016/2017/2018.
You can integrate the data manually (requires administrative knowledge).

2. First-time installation and copy data from version

This option installs Allplan 2019 to a new folder without affecting any other Allplan installation (2018 or earlier). You can configure Setup to automatically copy the office standard (\std), projects (\prj) and user data (\usr) from Allplan 2016/2017/2018 to the new installations folder.
This duplicates the data: You can use all projects, defaults and resources both in Allplan 2018 and in Allplan 2016/2017/2016. This way, you can test the new version without losing your 'old' Allplan version.
Bear in mind, though, that you should not mix data from different versions. Merging data later involves considerable time and effort.

2a. Continue with first-time installation and copy data from version

This option is available when you have already used the second installation option to install <Product_Version> to a computer that accesses the same data server. As a result, the data are already available.

3. Upgrade and transfer data from Allplan 2016/2017/2018

This option installs Allplan 2019 to an existing folder, converting Allplan 2016/2017/2018 to Allplan 2019 and transferring all important settings. Afterwards, you can no longer work with Allplan 2016/2017/2018.
This does nor affect earlier Allplan versions (Allplan 2015 or earlier).


Installing on a network:

• If you work in a network environment (one common central file storage folder), you must upgrade all workstations to Allplan 2019. Beforeyou start installing, make sure that all workstations can be upgraded. For technical reasons, it is not possible to mix installations of different major releases. Any related problems area not covered by service contracts.

• During the upgrade, Allplan 2016/2017/2018 must not be running on any workstation.

• When installing with Workgroup Manager, make sure all workstations are checked in before you start upgrading.

Converting the data:

Data from earlier Allplan versions need to be converted to version 2019. Allplan 2019 automatically converts the data of a project you open. Click here for instructions on how to convert all projects in a single operation:

https://connect.allplan.com/en/faqid/20090408124904.html


IBD 2019

Click here for instructions on how to get your activation codes for Allplan IBD:

https://connect.allplan.com/en/faqid/20110912113530.html

Question:

Can I "automate" the installation of Allplan?


Answer:

You can install Allplan 2017 in silent mode. This installation mode is fully automatic; you do not need to enter anything. Silent installation is particularly useful if you want to install Allplan 2017 with the same settings on a large number of workstations on a network.

Requirements for installing in silent mode:

Pay attention to the different licensing types!

Licensing for stand-alone workstations:
Make sure you have not yet activated a license on the computer where you want to record silent installation. Use the Viewer option for recording.

After having installed all computers in silent mode, you must use the Product Key to activate the license locally on each computer.
To activate the license after installation:

• Open the 'License settings' dialog box: Services application -> Utilities -> License settings
• Click License activationon the left.
• Enter your Product Key.
• Click Activate license.
  

Using a license server:

• The clients take the licenses from a license server.
• The license server is installed.
• The license of the license server is activated.

For more information on the license server, go to http://connect.allplan.com/de/support/loesungen.html?tx_nemsolution_pi1%5BdokID%5D=20161115093205.htmlhttps://connect.allplan.com/en/faqid/20150618084450.html
Use the Use active licenseoption for recording.

Setup writes the license settings to the %AppData%\Nemetschek\Lic3.ini file.You must distribute this file to all computers.


Some more tips:

• Before you start installing, unzip the Allplan installation package (for example, using the 7_Zip program). Make sure this package is in a folder that can be accessed by all clients you want to install.
• Start the command prompt for running the setup program always as a local administrator. To do this, open the shortcut menu and select "Run as administrator". Make sure you always start the command prompt from the correct folder.
• Setup will automatically install any Microsoft components required by Allplan such as Microsoft .NET-Framework or Microsoft Report Viewer without prompting you to confirm.

Preparing to install in silent mode

To record and run silent installation, you need the installation files of Allplan 2017.
Installing in silent mode involves three steps:

Creating the log file for installing in silent mode

Start by installing Allplan 2017 with the /r option on a typical workstation. During installation, Setup automatically writes all entries to a log file named setup.iss. You can then use this file to install the program on the other workstations.

Installing in silent mode

Next, install Allplan 2017 with the /s option on all other workstations. Installation is based on the setup.iss log file you created in the first step.

Checking the installation

Finally, you should check the setup.log file, which was created automatically during setup, to see whether everything was installed correctly.

Note: When installing in silent mode, Setup usually uses the same setup.iss file to install the program on all workstations. However, you can edit some settings of the setup.iss file if you want to adjust paths. You can find more information in the help; see Adjusting the setup.iss filehttp://help.allplan.com/Allplan/2017-0/1031/Allplan/index.htm#331.htm


To install Allplan in silent mode, do the following:

Install .NET 4.6
Silent setup requires you to install .NET 4.6 in advance. The reason for this is that you have to reboot the computer after installation of .NET 4.6. This reboot would interrupt silent installation.


After you have downloaded the installation files, you must unzip these files before you can use them to install in silent mode.

• Unzip the zip file downloaded. This results in an .exe file (for example, Allplan 2017-0-5-cad.exe).
• Then unzip this .exe file using an appropriate program (for example, 7_Zip) and save the resulting file to any folder. You can now use the command prompt to start Setup.exe for recording.

1. Sample installation:
Start by creating a record file. To do this, run setup with the settings you need. You only need to do this once.

Use the command prompt to start this installation with the "/r" option (for record):

To run the setup program, open the command prompt as a local administrator and type the following:
setup.exe /r

Setup starts and runs as usual.

Stand-alone license:
When you are prompted to choose the license configuration, select the Use vieweroption.
License server:
When you are prompted to choose the license configuration, select the Use active licenseoption.


Setup logs the entire installation process, writing everything to the setup.iss file.

If you want, you can change the name and folder of this file:

setup.exe /r /f1<folder>:\Setup.iss
For example,
setup.exe /r /f1c:\Setup.iss
This saves the file directly to C:\.

Be careful:
There must not be any blanks between "f1" and the folder!

Copy the setup.iss file to a folder that can be accessed by all clients you want to install. It is a good idea to copy this file to the folder with the Allplan installation files.

License server:
Copy the %AppData%\Nemetschek\Lic3.inifile to the %AppData%\Nemetschek folder of every client.
If you install Allplan on a client for the first time, you must create the Nemetschek folder in %AppData% first (for example, C:\Users\Username\Appdata\Roaming\Nemetschek).


2. Silent installation:
Make sure you can access the setup.iss file.

License server:
Make sure the Lic3.ini file is in the %AppData%\Nemetschek\ folder.


Setup logs the entire installation process again, writing everything to the setup.log file. You can find this file in the same folder as the setup.iss file. With the /f2 option, you can specify a different folder and file name for the setup.log file.

To start installing Allplan in silent mode on a client, open command prompt as a local administrator and type the following:

setup.exe /s /f1<folder>:\Setup.iss /f2<folder>:\Setup.log

For example,
setup.exe /s /f1c:\Setup.iss /f2c:\Setup.log
This saves the file directly to C:\.

Check the setup.log file to see whether everything has been installed correctly. The [ResponseResult] section should return the 'ResultCode=0' value.



Note:

If you have several licenses or license servers, select the required license for each client using the Services application - Utilities - License settings.

Refer to the online help for detailed information on installing in silent mode.
http://help.allplan.com/Allplan/2017-0/1031/Allplan/index.htm#321.htm
To open the help system, press the F1 key during setup. Go to the "Contents" tab, select "Installing" and then "Installing in silent mode".

You can also find information in the help for the license settings:
Services application -> Utilities -> License settings
To open the help system, press the F1 key. Go to the "Contents" tab, select "Licensing Allplan using a license server" and then "Installing in silent mode".


Please note that we cannot provide support for this installation method.

Question:

Allplan crashes when you open the Wall dialog - what can you do?



Answer:

Since Allplan version 2020, you can also use OpenGL in Allplan if you use an onboard graphics card. Provided this card supports the OpenGL version listed in the system requirements:

System requirements Allplan 2020

In connection with outdated grafic card drivers and current Windows updates, the described crashes may occur in individual cases.

In this case, please update the drivers of your graphics card(s) first by downloading the appropriate driver from the manufacturer's homepage and then installing it:

https://www.amd.com/de/supporthttps://www.intel.de/content/www/de/de/support/articles/000005517/graphics-drivers.htmlAMD grafics driver
Intel grafics driver
https://www.nvidia.de/Download/index.aspx?lang=deNVIDIA grafics driver

Important: please do not use the Update Driver button in the Device Manager.

If the problem is not solved after the driver update, please contact your Allplan support.

Information:

This document provides additional information on installing Allplan 2021.

Data backup/archiving:

We strongly recommend that you perform a complete data backup and archive this data before you upgrade to Allplan 2021!


Installation Instructions:


Detailed installation instructions can be found in the following places:

- If you have downloaded and unpacked Allplan 2021, you will find the file install.chm in the folder C:\Users\Public\Documents\Allplan 2021\HelpFiles\English


Please read these before installing Allplan 2021.

System requirements Allplan 2021

https://connect.allplan.com/de/faqid/20200930085615.html

Licenses when upgrading to Allplan 2021

https://connect.allplan.com/en/faqid/20200821110044.html


Extract from the installation instructions (see above)

If you want to switch from Allplan 2018/2019/2020 to Allplan 2021, you have three basic installation options.

1. New installation

Allplan 2021 is installed in a new folder. Any existing installations of Allplan (2020 or older) are not affected. No data and settings are transferred to the new installation.

The following options are available for transferring data later:

Uninstall Allplan 2021 and then upgrade Allplan 2018/2019/2020.
Integrating the data by hand (administrator knowledge required).

2. New installation with data copy from version

Allplan 2021 is installed in a new folder. Any existing installations of Allplan (2020 or older) are not affected. The office standard (\std), projects (\prj) and user data (\usr) can be automatically copied from an existing version 2018/2019/2020 to the new installation folder.
In this way, you can create a duplicate dataset if necessary: all projects, standards and resources can be used in both Allplan 2021 and 2018/2019/2020. This allows you to test the transition to the new version in real life, while the existing Allplan installation remains fully functional.
Note, however, that this method of working should avoid parallel processing of data in both installations, as the subsequent merging is time-consuming.

2a. Continuation of new installation with data copy from version

This option is available if a new installation with data copy has already been performed on another computer accessing the same data server and therefore the data has already been transferred.

3. Upgrade with data transfer from version 2018/2019/2020

Allplan 2021 is installed in an existing folder. The existing installation of Allplan 2018/2019/2020 is converted to Allplan 2021 and all important settings are transferred (see also Limitations for Data Transfer). Allplan 2018/2019/2020 is then no longer available.
Any existing installations older than Allplan 2018 are not affected.


Network Installations:

For network installations (shared 'central file storage folder'), only one main release version can be used - all workstations must be brought to Allplan 2021. Before starting the installation, make sure that all workstations have upgrade authorization. A mixed installation of different main versions is not technically approved. Complications that may arise are not covered by the maintenance contracts.

During the upgrade, no workstation may be running any version 2020, 2019 or 2018.

In case of an installation with Workgroupmanager all workstations must be checked in during the upgrade.




Data Conversion:

Data from older Allplan versions must be converted to version 2021. This happens automatically for projects opened in Allplan 2021. For instructions on how to convert all projects at once, click here:

https://connect.allplan.com/de/faqid/20090408124904.html

Information:

This document provides further information on installing Allplan 2017.

Backing up and archiving data:

We strongly recommend that you back up and archive all your data before you upgrade to Allplan 2017.


How to install:


You can find detailed instructions on how to install Allplan 2017 in the following places:

- After you have downloaded Allplan 2017, you can find the install.chm file in the Helpfiles\English folder.
- You can find the install.chm file on the Allplan 2017 DVD in the following folder: <DVD>:\programs\x64\Allplan\Helpfiles\English.

Please read these instructions before you install Allplan 2017.

• System requirements for Allplan 2017
  
  https://connect.allplan.com/en/faqid/20160420112118.html
  
• How to handle licenses when upgrading to Allplan 2017
  
  Allplan 2016 introduced a new protection system. Licensing is now based on CodeMeter by Wibu Systems AG. You can no longer use Softlock, NemSLock server or hardlock with Allplan 2016 and Allplan 2017.
  
  https://connect.allplan.com/en/faqid/20160510151917.html
  
  
  

Some notes on installing Allplan 2017

If you want to switch from Allplan 2014/2015/2016 to Allplan 2017, you can choose between three installation options. We recommend using the second option: first-time installation and copy data from Allplan 2014/2015/2016.

1. First-time installation

This option installs Allplan 2017 to a new folder without affecting any other Allplan installation (2016 or earlier). Setup does transfer neither data nor settings to the new installation.

If you want to transfer data later, you have the following options:

You can uninstall Allplan 2017 and then upgrade from Allplan 2014/2015/2016.
You can integrate the data manually (requires administrative knowledge).

2. First-time installation and copy data from Allplan 2014/2015/2016

This option installs Allplan 2017 to a new folder without affecting any other Allplan installation (2016 or earlier). You can configure the program to automatically copy the office standard (\std), projects (\prj) and user data (\usr) from Allplan 2014/2015/2016 to the new installations folder.
This duplicates the data: you can use all projects, defaults and resources both in Allplan 2016 and in Allplan 2014/2015/2016. This way, you can test the new version without losing your 'old' Allplan version.
Bear in mind, though, that you should not mix data from different versions, as merging data later involves considerable time and effort.

2a. Continue with first-time installation and copy data from version

This option is available when you have already installed <Product_Version> and copied the data to a different computer that accesses the same data server. As a result, the data have already been transferred.

3. Upgrade and transfer data from Allplan 2014/2015/2016

This option installs Allplan 2017 to an existing folder, converting Allplan 2014/2015/2016 to Allplan 2017 and transferring all important settings. Afterwards, you can no longer work with Allplan 2014/2015/2016.
This does nor affect earlier Allplan versions (Allplan 2013 or earlier).



Installing on a network:

• If you work in a network environment (one common central file storage folder), you must upgrade all workstations to Allplan 2017. Therefore, make sure you can upgrade all workstations (deadline for Serviceplus agreement: July 1, 2016) beforeyou start installing.
• During the upgrade, Allplan 2014/2015/2016 must not be running on any workstation.
• When installing with Workgroup Manager, make sure all workstations are checked in before you start upgrading.

Converting data:

• Data from earlier Allplan versions must be converted. Allplan 2017 automatically converts the data of a project you open. Click here for instructions on how to convert all projects in a single step:
  
  https://connect.allplan.com/en/faqid/20090408124904.html
  
  

IBD 2017

IBD 2017 is expected to be released with the Allplan 2017-0-1 Hotfix at the end of July 2016.
https://connect.allplan.com/en/faqid/20160707142752.html

Question:

How is a silent installation of Allplan carried out?




Answer:

From version 2022, Allplan is installed via Windows Installer.
The Windows Installer has a number of advantages, such as the ability to repair and provide the installation in a network. Allplan can also be installed unattended ("quiet") using the Windows Installer.

Please note that no individual support can be provided for this procedure.


The following steps are necessary:


1. editing the settings file

The attached settings file must be edited in advance to select the desired programme components.

Structure:
- Installation Options:
Set the desired installation option:
 
New installation:
No data will be taken over from the most recent previous version.
Value to be entered:
Upgrade.UpgradeNew
 
New installation with data copy:
Allplan is installed parallel to the previous version and the data (with the exception of the projects !) is copied.
Projects can be transferred to Allplan itself after the installation is complete.
Value to be entered:
Upgrade.UpgradeKeep
 
Upgrade:
The latest available Allplan version is transferred to the current version.
Upgrade.Upgrade
 
 
· Paths:
Enter the desired program folder under "InstallPath" and the desired central file storage folder for Allplan under "CentralPath".

Example:
InstallPath=C:\Program Files\Nemetschek\Allplan_2022
CentralPath=D:\Nemetschek\Allplan_2022

Important:
In case of upgrade, be sure to specify the paths of the previous version.
- Countries and languages:
Select the countries and languages to be installed from the list of suggestions in the file.
Define the main country with "DefaultCountry" and the main language of the installation with "DefaultLanguage".
If desired, add further countries and/or languages.
Important: For a functional installation, the main country and main language must be specified.
Example:
# Country list: AUS AUT BEL BRA BUL CAN CHN DEU ENG FRA GRC HOL HRV ITA JPN KOR POL PRT RUM RUS SLK SPA SVN SWI TCH TRK UNG USA VNM YUG
# Language list: BUL CHN DEU ENG FRA GRC HOL HRV ITA JPN POL PRT RUM RUS SER SLK SPA SVN TCH TRK UNG VIE
DefaultCountry=DEU
DefaultLanguage=DEU
Country.ITA
Language.ITA
 
- Advanced functions:
From the list of suggestions in the file, select those functions that are to be installed.
Example:
# Feature list: HelpFiles Fixtures TextureFiles Bft Demos
Feature.Fixtures
Feature.HelpFiles
Feature.TextureFiles
 
- Manufacturer-specific user data:
Select the user data to be installed from the list of suggestions in the file.
Example:
# Vendor list: Ancon Ancotech Armaturis Bartec Coupler Einbauteile Erico Filigran Halfendeha Halfenhbs Hrc Leitungskataster Lindab Peikko Philipp Reidbar Rolltec Sah Schoeck
Vendor.Ancon
Vendor.Ancotech
Vendor.Armaturis
Vendor.Bartec
Vendor.Coupler
Vendor.Einbauteile
Vendor.Erico
Vendor.Filigran
Vendor.Halfendeha
Vendor.Halfenhbs
Vendor.Hrc


2. storage of the installation and the settings file on a share (optional)

In order to be able to roll out the Allplan installation efficiently on all computers, it is recommended that both the Allplan setup and the settings file are stored on a share in the network to which all computers concerned have access.


3. selection of the installation option
You can choose between the following installation options:

- Quiet installation: Installation takes place without the need for user input.
- Passive installation: The installation takes place with reduced user input.

4. Installation
The installation is called up in the unpacked 'Allplan' folder by the file 'Allplan_Installer.exe' via the following command line entries:
 
- For Quiet installation:
Allplan_installer.exe /Settings <path-to-settings-file> /quiet.
 
Example:
\\SERVER\Freigabe\Unterordner\Allplan_Installer.exe /settings \\SERVER\Freigabe\Unterordner\settings.txt /quiet
 
- For passive installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /passive
 
Example:
\\SERVER\Freigabe\Unterordner\Allplan_Installer.exe /settings \\SERVER\Freigabe\Unterordner\settings.txt /passive
 
5. modifying the installation
It is also possible to modify the installation.
To do this, edit the settings file for the desired additional components or components to be removed.
Call up the setup with the following parameters:
 
- For Quiet installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /quiet /modify
 
Example:
\\SERVER\Freigabe\Unterordner\Allplan_Installer.exe /settings \\SERVER\Freigabe\Unterordner\settings.txt /quiet /modify
 
- For passive installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /passive /modify
 
Example:
\\SERVER\Freigabe\Unterordner\Allplan_Installer.exe /settings \\SERVER\Freigabe\Unterordner\settings.txt /passive /modify
 
6. repair of the installation
It is also possible to repair the installation.
Call up the setup with the following parameters:
 
- For Quiet installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /quiet /repair
 
Example:
\\SERVER\Freigabe\Unterordner\Allplan_Installer.exe /settings \\SERVER\Freigabe\Unterordner\settings.txt /quiet /repair
 
- For passive installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /passive /modify
 
Example:
\\SERVER\Freigabe\Unterordner\Allplan_Installer.exe /settings \\SERVER\Freigabe\Unterordner\settings.txt /passive /repair
 
7. uninstallation
The uninstallation can also be done via passive or quiet installation.
 
Call up the setup with the following parameters:
 
- For quiet installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /quiet /uninstall
 
Example:
\\SERVER\Freigabe\Unterordner\Allplan_Installer.exe /settings \\SERVER\Freigabe\Unterordner\settings.txt /quiet /uninstall
 
- For passive installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /passive /uninstall
 
Example:
\\SERVER\Freigabe\Unterordner\Allplan_Installer.exe /settings \\SERVER\Freigabe\Unterordner\settings.txt /passive /uninstall
 
Note on downloading the full set-up from version 2023:
From version 2023, Allplan is installed using the minimal installer, which only downloads those components that are actually required for the installation.
If, for example, the complete installation package with all optional components is required for rolling out the setup, it can be downloaded via the layout mode described below. Of course, the name of the "Installer.exe" must be changed to the actual name (e.g.:Allplan_2023_0_0_Installer.exe) in Silent Setup:

https://connect.allplan.com/de/faqid/sc-000007942.html


Note Licensing:
As there will no longer be a licence query in Allplan Setup from 2022, this information cannot be provided.
If a licence server is in use, it can be set up on a computer and then distributed using the following procedure.

https://connect.allplan.com/de/faqid/sc-000007100.html

Question:

How is a silent installation of Allplan from version 2024 carried out?

Answer:

Allplan has been installed using the Windows Installer since version 2022.
The Windows Installer has a number of advantages such as repairability and providing installation on a network. Allplan can also be installed unattended (“quiet”) using the Windows Installer.

Please note that no individual support can be provided for this procedure.
If you are unsure, ideally have your IT service provider or administrator carry out these instructions.

The following steps are necessary:

1. Edit the settings file
The settings file attached to this FAQ must be edited in advance in order to select the desired program components.
Here is a description of the structure of the settings.txt file:

· Installation options:
Set the desired installation option:

New installation:
No data is transferred from the most current previous version.
Value to be entered:
Upgrade=Upgrade.UpgradeNew
 
New installation with data copy:
Allplan is installed parallel to the previous version and the data (with the exception of the projects) is copied. Projects can be transferred to Allplan itself after the installation has been completed.
Value to be entered:
Upgrade=Upgrade.UpgradeKeep
 
Upgrade:
The latest available Allplan version will be converted into the current version.
Upgrade=Upgrade.Upgrade
 
· Paths:
Enter the desired program folder under "InstallPath" and the desired central file storage folder for Allplan under "CentralPath",
When storing data in a network, be sure to use the CentralPath in UNC notation.

Example:
InstallPath=C:\Program Files\Nemetschek\Allplan_2024
CentralPath=\\SERVER\CAD_Daten\Allplan\Allplan_2024

Important:
In the case of an upgrade, be sure to specify the path of the previous version for "CentralPath".


· Countries and languages:
Select the countries and languages to install from the list of suggestions in the file.
Set the main country with "DefaultCountry" and the main language of the installation with "DefaultLanguage".
Add additional countries and/or languages if desired.
Wichtig: For a functional installation, the main country and language must be specified.

Example:
# Country list: AUS AUT BEL BRA BUL CAN CHN DEU ENG FRA GRC HOL HRV ITA JPN KOR POL PRT RUM RUS SLK SPA SVN SWI TCH TRK UNG USA VNM YUG
# Language list: BUL CHN DEU ENG FRA GRC HOL HRV ITA JPN POL PRT RUM RUS SER SLK SPA SVN TCH TRK UNG VIE
DefaultCountry=DEU
DefaultLanguage=DEU
Country.ITA
Language.ITA
Language.ENG

· Advanced features:
Select the features or data you want to install from the list of suggestions in the file.

Example:
# Feature list: ProgramFiles AutoCon Desktop HelpFiles TextureFiles
Feature.ProgramFiles
Feature.AutoCon
Feature.Desktop
Feature.HelpFiles
Feature.TextureFiles
Feature.Demos

· Manufacturer-specific user data:
From the suggestion list in the file, select the user data (product catalogs for reinforcement or formwork catalogs) that should be installed.

Example:
# Vendor list: Ancon Ancotech Armaturis Lindab BarSplice Coupler DaytonSuperior Bartec Rolltec Erico Filigran Halfendeha Halfenhbs Hrc Line Register Peikko Philipp Reidbar Sah Schoeck Splice
Vendor.Ancon
Vendor.Ancotech
Vendor.Armaturis
Vendor.Lindab
Vendor.BarSplice
Vendor.Coupler
Vendor.DaytonSuperior
Vendor.Bartec
Vendor.Rolltec
Vendor.Erico
Vendor.Filigran
Vendor.Halfendeha
Vendor.Halfenhbs
Vendor.Hrc
Vendor.Leitungskataster
Vendor.Peikko
Vendor.Philipp
Vendor.Reidbar
Vendor.Sah
Vendor.Schoeck
Vendor.Splice

# Formwork: Meva1
Formwork.Meva1

2. Storage of the installation and the settings file on a share (optional)
In order to be able to roll out the Allplan installation efficiently on all computers, it is recommended to store both the Allplan setup and the settings file on a share in the network to which all relevant computers have access. See also the note on the full setup at the end of the FAQ.

3. Choice of installation option
You can choose between the following installation options:

· Quiet Installation: Installation takes place without user input being necessary.
· Passive installation: Installation takes place with reduced user input.

4. Installation
The installation is started in the unpacked 'Allplan' folder using the file 'Allplan_Installer.exe' using the following command line entries:

· For quiet installation:
Allplan_installer.exe /Settings <path to the settings file> /quiet

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /quiet

· For passive installation:
Allplan_Installer.exe /Settings <path to the settings file> /passive

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /passive
 
5. Modify the installation
It is also possible to modify the installation.
To do this, edit the settings file for the desired additional or components to be removed. Call the setup with the following parameters:

· For quiet installation:
Allplan_Installer.exe /Settings <path to the settings file> /quiet /modify

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /quiet /modify

· For passive installation:
Allplan_Installer.exe /Settings <path to the settings file> /passive /modify

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /passive /modify
 
6. Repair of the installation
It is also possible to repair the installation.
Call the setup with the following parameters:

· For quiet installation:
Allplan_Installer.exe /Settings <path to the settings file> /quiet /repair

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /quiet /repair

· For passive installation:
Allplan_Installer.exe /Settings <path to the settings file> /passive /modify

Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /passive /repair
 
7. Uninstall
Uninstallation can also be done via passive or quiet installation.
 
Rufen Sie das Setup mit folgenden Parametern auf:
 
· For quiet installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /quiet /uninstall
 
Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /quiet /uninstall
 
· For passive installation:
Allplan_Installer.exe /Settings <Pfad-zur-Settings-Datei> /passive /uninstall
 
Example:
\\SERVER\Share\Subfolder\Allplan_Installer.exe /settings \\SERVER\Share\Subfolder\settings.txt /passive /uninstall


HInt:
Of course, in the silent setup, the name of "Allplan_Installer.exe" must be adapted to the name that matches the version (e.g. Allplan_2023_0_4_Installer.exe).


Note on downloading the full setup from version 2023:
From version 2023 onwards, Allplan is installed using a minimal installer, which only downloads those components that are actually required for the installation.
If, for example, the complete installation package with all optional components is required to roll out the setup, it can be downloaded using the layout mode, which is described in the following FAQ.

https://connect.allplan.com/de/faqid/sc-000007942.html

 
Note on licensing:
Since there is no longer a license query in Allplan Setup from version 2022, this information cannot be provided. If a license server is in use, it can be set up on a computer and then distributed using the following procedure.

https://connect.allplan.com/de/faqid/sc-000007100.html

Question:

What graphics cards can be used with Allplan?



Answer:

Generally, the graphics cards of the two large manufacturers - NVIDIA and AMD (ATI) - can be divided into two product lines each:

1. Graphics cards designed for CAD (NVIDIA: Quadro / AMD (ATI): Fire)
2. Graphics cards designed for other applications (games, office) - "consumer level" (NVIDIA: GeForce / AMD (ATI): Radeon)

The performance and price of the individual product lines and models vary considerably.

In Allplan, the differences in performance become evident in the following situations:

• Graphics engine, a hardware-based graphics accelerator for designing in Allplan, which is important for large volumes of data.
• Animation

Nemetschek Allplan tests current graphics cards and certifies those that can be used with Allplan.
The section that follows provides information on various situations.

• Purchase of new hardware:

You are advised to only consider graphics cards that are designed for CAD.
Allplan Connect helps you find a suitable graphics card. Just follow this link:
https://www.allplan.com/services/cad-software-support/grafikkarten.html

To see whether a specific graphics card can be used, all you need to do is type in its name in the custom box.

• Existing hardware:

To determine whether the entire system you use meets the technical requirements, you can use the system test:
https://www.allplan.com/services/cad-software-support/downloads.html

Explanations of the messages issued for graphics cards:

Warning: The graphics board is a consumer-level card (see log). Although it supports the hardware requirements for ..., it is not optimized for CAD systems.
-> The graphics engine works with this card. Please read the following notes:
https://connect.allplan.com/de/faqid/20101004223723.html

Warning: The graphics board 'XXX' causes problems.
-> The graphics engine does not work with this card. Allplan runs in "GDI+" mode. large volumes of data considerably slow down the performance of the computer.
Allplan Connect also helps you determine whether a specific graphics card can be used (see above).

Question:

Which graphics cards are recommended for Allplan?



Answer:


Follow this link to see a list of the AMD/ATI & NVidia graphics cards manufacturers that are CERTIFIED FOR ALLPLAN.
We have tested the OpenGL functionality and the animation performance of various Allplan modules with specially prepared data with each of the cards available.
https://www.allplan.com/services/cad-software-support/grafikkarten.html

The tested drivers can be found on the homepage of the individual manufacturer. The driver versions that were used in the tests are included in the tables so that you can compare the data. However, we strongly recommend that you always installthe current driver of the manufacturer.

It is a good idea to check your system using the system tool you can find on our homepage:
https://www.allplan.com/services/cad-software-support/downloads.html



Additional information:

Allplan 2011 was revised completely for accelerated graphical representation.
To guarantee full performance support for Allplan 2011 and later, please check that your graphics cards meet the hardware requirements for DirectX 10 & OpenGL 2.0 (chip-based). In addition, you need to install the current drivers. Allplan will automatically switch to the conventional drawing method when it starts and finds old graphics cards that do not meet the requirements stated above.

For more information on graphics card specifications, go to

http://en.wikipedia.org/wiki/Comparison_of_AMD_graphics_processing_units
http://en.wikipedia.org/wiki/Comparison_of_NVIDIA_graphics_processing_units#Quadro)



Note:

We kindly ask you to understand that products of other manufacturers that are not mentioned have not been tested and therefore cannot be recommended.

Question:

Where can I find out about system requirements and the system test tool for Allplan 2014 or Allplan BCM 2014?



Answer:

Follow the link to get detailed information on the following topics:

- System test
- System requirements
- Graphics cards
- Large-format printers

https://www.allplan.com/info/sys2014

https://www.allplan.com/services/cad-software-support/downloads.html

https://www.allplan.com/services/cad-software-support/grafikkarten.html

https://www.allplan.com/services/cad-software-support/grossformatdrucker.html

Question:

How to install and run NemSLock Server?



Answer:

Before installing, check whether the package you received includes the following items:

• Temporary licenses for NemSLock Server, e.g. 1234567a_001_psd.nslsrv
• Temporary licenses for clients, e.g. 1234567a_001_psd_client.nslock

How to install NemSLock Server

• Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

• Select one of the temporary license files for NemSLock Server. These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
• When you opt for the “Custom” setup type, you can choose between the following program features:
  Console
  You can use this program to administer NemSLock Server. You can also install the console on more workstations so that you can administer the server from a number of different locations. However, you can only connect one console to the server at any one time.
  Server
  The actual license server.
  Logviewer
  This tool analyzes the log files of NemSLock Server.
  

By default, Setup installs all these features.
If you have several temporary licenses for NemSLock Server, use the server console to install the remaining licenses after the installation. The procedure is described in the section "How to install licenses".


How to register licenses

• Open NemSLock 2006 Server Console by clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
• Click "Modules" on the left.
• Select the seat you want to register. If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.
• Click the "Registration request (register.txt)" button.
• Click "Edit".
• You must fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
• Click "Create registration request". Windows Explorer opens and shows the register.txt file. If this window is closed, you can find this file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is:
  C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License
• Now you can use all the options provided by Windows Explorer to copy the registration file to a computer with Internet access on the network. Alternatively, you can also use an USB stick. You can then email this file to us.
• Send the email with the registration request to register@nemetschek.de

How to install licenses

• Open NemSLock 2006 Server Console.
• Click "Stop server" on the left.
• Click "Modules" on the left.
• Click "Browse" to navigate to the registered license file.
• Click "Install license file".
• After this, you can start the server again by clicking "Start server".

How to set up users (optional)

• predefined user ALLis created automatically. If there is no other user, each user is given the privileges of the user ALL. By default, this user can use all licenses but cannot check out any licenses. By double-clicking the user, you can change the user's privileges.
• predefined user ALLallows all users to use licenses. In order to do this, the users must be able to access the server. You do not need to create individual user profiles until you want to assign specific rights to individual users or limit access to selected users. predefined user ALL. If you want to work only with individual users, you should deactivate the predefined user ALL by revoking the user's right to use licenses.
• predefined user ALL has administrator privileges unless another user is created and appointed as the administrator. As soon as you have appointed an administrator, ALL no longer has administrator privileges.
• You can enter users in the “Users.mcf” file. predefined user ALL has administrator privileges again. In addition, each user can once again administer the license server using the console.
• The administrator user is not a special user. If there are several administrator users, only one administrator user can start the console for this license server at any one time.
• If you are setting up users without giving administrator privileges to anyone, the program will ask you whether you want to appoint yourself as the administrator.

You can also specify a domain (user authentication for Windows server). However, this is not mandatory. If you do not specify a domain, the program uses the Windows user name for each user.

The program writes the user accounts and the associated access rights as ASCII text to the users.mcf file.

You can find this file in the \Programs folder of the NemSLock Server installation. You cannot rename, delete or move this file. If the program can no longer connect to this file, you must exit NemSLock Server, restart it and enter all users again from scratch. predefined user ALLis retained.

Note:
Experienced administrators can use the PowerShell script NemGenUsers.ps1. This file is in the \Programs folder of the NemSLock Server installation or you can find it as an FAQ in Allplan Connect:

connect.allplan.com/en/faqid/20120907161911.html



How to install and configure clients

• Use one of the nslock license files you received to install the clients. Do not use the trial license or the license server license. It is irrelevant which of the client licenses you use, as the actual license will come from the license server later.
• You do not need to register the clients.
• When switching from Hardlock to NemSLock (server), you need to update the client using a nslock license file.

After having installed the client, you need to switch to the license server:

• Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
• If the license server window is not visible, select "Configure NemSLock Server" at the bottom. Lock this window. All you need to do is click the drawing pin icon.
• Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
• Now the user can select one of the seats provided.
• After having successfully connected to the license server, clear the check boxes for the trial licenses in the area at the top.
• Click "Close" to complete the configuration. Now you can start Allplan.

Notes:

• If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
• 2014-1 and later: If the latest version of License Manager is installed (file version 1. 0. 26. 153 or later, see License Manager- Options- System), you can also select several licenses. If one of the selected licenses is currently being used by someone else, the program will automatically select the next available license.
• Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
• The license server and the licenses are downward compatible; they can be used in conjunction with older Allplan versions.
  

Question:

How can I switch the license server from hardlock to NemSLock?



Answer:

• If you have not yet requested the switch, please send a short email to "nemslock@nemetschek.de". Describe your request briefly and include your customer number and the seat number(s) you want to switch. Bear in mind that switching may take up to two working days.
• Before you install, check whether you have all the necessary files:
• At least one temporary license for NemSLock Server, for example: 1234567a_001_psd.nslsrv
• At least one temporary license for the client, for example: 1234567a_001_psd_client.nslock
• You can find the current setup on our FTP server:
  ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

How to install NemSLock Server

• Start the Setup program for NemSLock Server.
• Select one of the temporary license files for NemSLock Server. These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
• If you received several license files, use the Server Console to install these additional licenses as described in the section entitled "How to install licenses".

How to register licenses

• Open NemSLock 2006 Server Console by clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
• Click "Modules" on the left.
• Select the seat you want to register. If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.
• Click the "Registration request (register.txt)" button.
• Click "Edit".
• Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
• Click "Create registration request". Windows Explorer opens and shows the register.txt file. If this window is closed, you can find this file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is:
  C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License
• Now you can use all the options provided by Windows Explorer to copy the registration file to a computer with Internet access on the network. Alternatively, you can also use an USB stick. You can then email this file to us.
• Send the email with the registration request to register@nemetschek.de

How to install licenses

• Open NemSLock 2006 Server Console.
• Click "Stop server" on the left.
• Click "Modules" on the left.
• Click "Browse" to navigate to the registered license file.
• Click "Install license file".
• After this, you can start the server again by clicking "Start server".

How to set up users (optional)

• predefined user ALLis created automatically. If there is no other user, each user is given the privileges of the user ALL. By default, this user can use all licenses but cannot check out any licenses. By double-clicking the user, you can change the user's privileges.
• predefined user ALLallows all users to use licenses. In order to do this, the users must be able to access the server. You do not need to create individual user profiles until you want to assign specific rights to individual users or limit access to selected users. predefined user ALL. If you want to work only with individual users, you should deactivate the predefined user ALL by revoking the user's right to use licenses.
• predefined user ALL has administrator privileges unless another user is created and appointed as the administrator. As soon as you have appointed an administrator, ALL no longer has administrator privileges.
• You can enter users in the “Users.mcf” file. predefined user ALL has administrator privileges again. In addition, each user can once again administer the license server using the console.
• The administrator user is not a special user. If there are several administrator users, only one administrator user can start the console for this license server at any one time.
• If you are setting up users without giving administrator privileges to anyone, the program will ask you whether you want to appoint yourself as the administrator.

You can also specify a domain (user authentication for Windows server). However, this is not mandatory. If you do not specify a domain, the program uses the Windows user name for each user.

The program writes the user accounts and the associated access rights as ASCII text to the users.mcf file.

You can find this file in the \Programs folder of the NemSLock Server installation. You cannot rename, delete or move this file. If the program can no longer connect to this file, you must exit NemSLock Server, restart it and enter all users again from scratch. predefined user ALLis retained.

Note:
Experienced administrators can use the PowerShell script NemGenUsers.ps1. This file is in the \Programs folder of the NemSLock Server installation or you can find it as an FAQ in Allplan Connect:

connect.allplan.com/en/faqid/20120907161911.html


How to install and configure clients

• Use one of the nslock license files you received to install the clients. Do not use the trial license or the license server license. It is irrelevant which of the client licenses you use, as the actual license will come from the license server later.
• You do not need to register the clients.
• When switching from Hardlock to NemSLock (server), you need to update the client using a nslock license file.

After having installed the client, you need to switch to the license server:

• Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
• If the license server window is hidden, click "Server" at the bottom. It is a good idea to lock this window. All you need to do is click the drawing pin icon.
• Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
• Now the user can select one of the seats provided. Click "Close" to complete the configuration. Now you can start Allplan.
• After having successfully connected to the license server, clear the check boxes for the trial licenses in the area at the top.

Notes:

• If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
• Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
• The license server and the licenses are downward compatible; they can be used in conjunction with older Allplan versions.
  

How to return the dongle
Return the dongle as agreed. As soon as we have received the dongle, we will send you the unlimited server licenses by email. Use the Server Console to install these licenses on the license server as described in "How to install licenses".

Question:

I purchased the license server. How can I install and configure the license server?



Answer:

Allplan is using since version 2016 a new protection system. Licensing is based on CodeMeter by Wibu Systems AG since then. You can no longer use NemSLock Server with Allplan 2016 and higher.

Allplan requires a Product Key. Using this key, you can activate your license online. The Product Key is a unique, 26-digit character string. You can use it to activate a license for Allplan.
You can find your Product Key in Allplan Connect. Go to http://connect.allplan.com/license
Note: The license is downwards compatible til version Allplan 2016-1-4 even if a higher version is displayed.

To install the license server, download the software for the license server from Allplan Connect


The Wibu license server is part of the CodeMeter driver, which is installed along with Allplan. If you have already installed Allplan on the license server, you do not have to install additional software. But you can also install the license server separately; you do not have to install Allplan.
In any case, install and activate the license server before you install Allplan on the clients.

You can activate a license in online mode only if you have ...

• Internet access
• a Product Key
• a license server license; you cannot use other licenses with the license server.

Installing the license server

• You must install the license server on a 64-bit Windows system.
• Start License Server Setup on the computer you want to use as the license server.
• Click Install.
• Start the license server by starting the License Settings program. Go to the License activation area, enter your Product Key and click Activate license.
• If you have more licenses for the license server, enter the respective Product Keys and activate the licenses.
• Afterwards, start CodeMeter Control Center.

To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen: enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.

Or
Enter Localhost:22350in the address bar of your browser.

• Select Configuration -> Server -> Access server in the Network server area and click Activate.
• Click Apply.

Configuring the license server (optional)

You can use the CodeMeter WebAdmin application to administer the license server.
To start and stop the license server service, you can use CodeMeter Control Center.

• CodeMeter Control Center -> Action -> Start or Stop CodeMeter Service

Access control
By default, all users on the LAN, who have installed the CodeMeter driver, can use a license from the license server.

• Basic access control: you can enter a list of client computer names or IP addresses that are allowed to access the license server.
• Advanced access control: you can specify global access rules (for all licenses) to control access to the licenses.

License tracking
To activate license tracking, you have to set the HKEY_LOCAL_MACHINE\SOFTWARE\WIBU-SYSTEMS\CodeMeter\Server\CurrentVersion\LogLicenseTracking registry entry to 1 and restart CodeMeter Service.

After having activated this key, you can use CodeMeter WebAdmin to create a report showing details about the licenses used over a specific period of time. To do this, open CodeMeter WebAdmin and go to the 'Server' - 'License Tracking' page. Select the period of time and the license for which you want to generate a report. Then click 'Create report'. If you click a single bar, you will get detailed analyses per day or per hour.

CodeMeter WebAdmin saves the reports to C:\ProgramData\CodeMeter\Logs.



Installing and configuring clients

Note for Version 2016: Install at least Allplan 2016-1-4 on the clients.

The license server license will be detected automatically on the network.
Install Allplan on the clients. When you are prompted to select the license file, click Use active license. Follow the installation instructions.

• You do not need to activatethe clients.

Allplan automatically finds the license server on the local network. If you have not selected a license, Allplan automatically selects the first available license.

After having installed Allplan on the clients, you can use the 'License Settings' dialog boxto configure license selection.
Services application -> Utilities -> License settings

Areas:

• License activation: this area is not relevant to clients taking their license from the license server.
• License selection: use this section if you get the license from a license server or if you have several licenses and you want to select the preferred license.
• Start as a viewer: click this button if you want to start Allplan as a viewer.

License selection

You can see the names of the available licenses with their seat numbers.
The 'Available' column indicates how many licenses are still available. Click the dropdown arrow to see a list of users currently working with a license.

Priority:
Select the check box in front of a license to select this license as a favorite. You can mark as many licenses as you want. Allplan will then prefer these licenses. Click to select one ore more licenses Allplan is not to use. If you do not select any license or if you have selected several favorites, Allplan will automatically use the first free license it finds.

Find license server automatically:
When you select this option, Allplan automatically detects a license server on the LAN. In some cases, such as VPN connections, Allplan may not be able to detect a server automatically. In this case, you can enter the server manually (see Additional server name).
Note: Only the Windows administrator can change this option.

Additional server name:
If 'Find license server automatically' is not active or Allplan has not automatically found a license server, you can manually enter the name or the IP address of the server. If 'Find license server automatically' is active, you can enter an additional server. After having entered the server name, click 'Update' to see the licenses of the license server. Use semicolons to separate several server names.


Note:

You can find detailed information on the license server in the License Settings help (F1 key).

Allplan communicates with the license server via TCP/IP. By default, communication is via Port 22350 unless you change the port in CodeMeter WebAdmin.

If a firewall is active on your computer, you must enable port 22350 for TCP and UDP. If the firewall filters in an application-specific manner, you have to enable the CodeMeter.exe license server service. You can find this service in the %Program Files (x86)%\CodeMeter\Runtime\bin Windows folder. Define the CodeMeter.exe service as an exception in the firewall. Some anti-virus programs also include firewall functions. If you are not sure, contact the manufacturer of the anti-virus program.

Question:

I purchased the license server. How can I install and configure the license server?



Answer:

Allplan is using since version 2016 a new protection system. Licensing is based on CodeMeter by Wibu Systems AG since then. You can no longer use NemSLock Server with Allplan 2016 and higher.

Allplan requires a Product Key. Using this key, you can activate your license online. The Product Key is a unique, 26-digit character string. You can use it to activate a license for Allplan.
You can find your Product Key in Allplan Connect. Go to http://connect.allplan.com/license
Note: The license is downwards compatible til version Allplan 2016-1-4 even if a higher version is displayed.

To install the license server, download the software for the license server from Allplan Connect


The Wibu license server is part of the CodeMeter driver, which is installed along with Allplan. If you have already installed Allplan on the license server, you do not have to install additional software. But you can also install the license server separately; you do not have to install Allplan.
In any case, install and activate the license server before you install Allplan on the clients.

You can activate a license in online mode only if you have ...

• Internet access
• a Product Key
• a license server license; you cannot use other licenses with the license server.

Installing the license server

• You must install the license server on a 64-bit Windows system.
• Start License Server Setup on the computer you want to use as the license server.
• Click Install.
• Start the license server by starting the License Settings program. Go to the License activation area, enter your Product Key and click Activate license.
• If you have more licenses for the license server, enter the respective Product Keys and activate the licenses.
• Afterwards, start CodeMeter Control Center.

To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen: enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.

Or
Enter Localhost:22350in the address bar of your browser.

• Select Configuration -> Server -> Access server in the Network server area and click Activate.
• Click Apply.

Configuring the license server (optional)

You can use the CodeMeter WebAdmin application to administer the license server.
To start and stop the license server service, you can use CodeMeter Control Center.

• CodeMeter Control Center -> Action -> Start or Stop CodeMeter Service

Access control
By default, all users on the LAN, who have installed the CodeMeter driver, can use a license from the license server.

• Basic access control: you can enter a list of client computer names or IP addresses that are allowed to access the license server.
• Advanced access control: you can specify global access rules (for all licenses) to control access to the licenses.

License tracking
To activate license tracking, you have to set the HKEY_LOCAL_MACHINE\SOFTWARE\WIBU-SYSTEMS\CodeMeter\Server\CurrentVersion\LogLicenseTracking registry entry to 1 and restart CodeMeter Service.

After having activated this key, you can use CodeMeter WebAdmin to create a report showing details about the licenses used over a specific period of time. To do this, open CodeMeter WebAdmin and go to the 'Server' - 'License Tracking' page. Select the period of time and the license for which you want to generate a report. Then click 'Create report'. If you click a single bar, you will get detailed analyses per day or per hour.

CodeMeter WebAdmin saves the reports to C:\ProgramData\CodeMeter\Logs.



Installing and configuring clients

Usually the license server license will be detected automatically in the network.
Install Allplan on the clients. There is no license druing setup necessary.
Follow the installation instructions.

• You do not need to activate the clients.

Allplan automatically finds the license server on the local network. If you have not selected a license, Allplan automatically selects the first available license.

After having installed Allplan on the clients, you can use the 'License Settings' dialog boxto check and configure license selection.
Services application -> Utilities -> License settings

Areas:

• License activation: this area is not relevant to clients taking their license from the license server.
• License selection: use this section if you get the license from a license server or if you have several licenses and you want to select the preferred license.
• Start as a viewer: click this button if you want to start Allplan as a viewer.

License selection

You can see the names of the available licenses with their seat numbers.
The 'Available' column indicates how many licenses are still available. Click the dropdown arrow to see a list of users currently working with a license.

Priority:
Select the check box in front of a license to select this license as a favorite. You can mark as many licenses as you want. Allplan will then prefer these licenses. Click to select one ore more licenses Allplan is not to use. If you do not select any license or if you have selected several favorites, Allplan will automatically use the first free license it finds.

Find license server automatically:
When you select this option, Allplan automatically detects a license server on the LAN. In some cases, such as VPN connections, Allplan may not be able to detect a server automatically. In this case, you can enter the server manually (see Additional server name).
Note: Only the Windows administrator can change this option.

Additional server name:
If 'Find license server automatically' is not active or Allplan has not automatically found a license server, you can manually enter the name or the IP address of the server. If 'Find license server automatically' is active, you can enter an additional server. After having entered the server name, click 'Update' to see the licenses of the license server. Use semicolons to separate several server names.


Note:

You can find detailed information on the license server in the License Settings help (F1 key).

Allplan communicates with the license server via TCP/IP. By default, communication is via Port 22350 unless you change the port in CodeMeter WebAdmin.

If a firewall is active on your computer, you must enable port 22350 for TCP and UDP. If the firewall filters in an application-specific manner, you have to enable the CodeMeter.exe license server service. You can find this service in the %Program Files (x86)%\CodeMeter\Runtime\bin Windows folder. Define the CodeMeter.exe service as an exception in the firewall. Some anti-virus programs also include firewall functions. If you are not sure, contact the manufacturer of the anti-virus program.

Question:
I purchased a new license and received a Product Key for Allplan. However, I work with an earlier Allplan version. How can I install and license Allplan 2015 or an earlier version despite the new license?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use Softlock (NemSLock) or hardlocks with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

For licensing earlier versions, you require the Client ID and CD Key. You can find this information in the delivery note or invoice. Instead of a temporary license, use the appropriate trial license to install Allplan 2015 or an earlier version. Then generate a registration request to license and activate the modules you purchased.

Note:
If you use a license server for which you purchased an additional license, please read the separate document or contact support.de@allplan.com. We will show you how to add the new license to the license server.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Allplan Connect:
https://connect.allplan.com/de/support/downloads.html


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Request a license registered for your computer
The trial license is valid for 30 days. It is not personalized.
Consequently, you have to enter your personal data manually when generating the registration request.
You can find the required Client ID and CD Key in the delivery note or invoice.

To generate a registration request, do the following:

Open the License Manager (Service application -> Utilities- > License -> License Manager).
Select the license entry for your seat and click 'Request license'. Please follow the instructions displayed on screen.

Note: Editing customer details requires administrator privileges. The system will issue an appropriate message. Close NemSLock License Manager and start the Services application again. To do this, click the Services desktop icon with the right mouse button and select 'Run as administrator' on the shortcut menu.


Enter the necessary details:
The Client IDhas eight zeros (00000000) and the CD Keyhas eight capital F's (FFFFFFFF).

For the Client ID, enter your customer number. You can find your customer number in the letteror delivery notethat came with Allplan.
For the CD Key, enter your CD Key, which you can also find in the letter or delivery note. Make sure you use small letters and capital letters accordingly.

Note:You can find the Client ID and CD Key at top left in the delivery note. The CD Keyusually consists of the numbers 0 to 9 and the capital letters A to F.


Fill out all the fields. Make sure you enter your email address correctly, because registered licenses and replies to status queries of license will be sent to the address you specify here.
Click Next >

For the seat, change the number 94 to the license you purchased, for example, 02, 03 or 04.
Specify how to send the registration file and click Next >.

Start email program ...
The program creates and saves the register.txt file before it opens your default email program. The program automatically attaches the registration file to the email and enters register (please no spam) @ (please no spam) nemetschek.defor the address.

Save the registration file ...
The program creates and saves the register.txt file before it opens the folder with the registration file in Windows Explorer. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.

In addition, you can see the data that were written to the registration file.

1. Click Finish.
   
2. Click Close to exit NemSLock License Manager.
   

You will receive a reply by email within a few minutes. This email provides information on the registration process and usually includes the registered license file.

Note: The registered license file is generated by an automated system. Consequently, any additional comments in incoming emails are not read.


3. Installing the license file
Shortly after we received the registration request, we will send you the final license file to the email address you specified in the registration request.
Install this license file as follows:

• Save the license file to any folder on the hard disk.
  If the license comes as a zip file, extract it.
• Next, install the license by double-clicking the license file ("customer#_seat.nslock").
  Confirm the dialog box.
• As an alternative, you can also use License Manager to install the license file (Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager).
  Click "Install - Install license" and then "Browse..." to select the license.
  Click "Finish" to complete the installation process.
• Your registered license is displayed in the License Manager. Clear the check box for the trial license (for example, seat 94 or 98). Make sure your registered license is the only license that is selected.

Question:

How can I move NemSLock Server to a new server?



Answer:

Reinstalling NemSLock Server

• Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:
  ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

• Select one of the temporary license files for NemSLock server (for example, 1234567a_001_psd.nslsrv). These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
• When you opt for the “Custom” setup type, you can choose between the following program features:
  Console
  You can use this program to administer NemSLock Server. The console can be installed on several workstations. This way, you can administer the server from a number of different locations. However, you can only connect one console to the server at any one time.
  Server
  The actual license server.
  Logviewer
  This tool analyzes the log files of NemSLock Server.
  User List Generator
  You can use this tool to create the users for NemSLock Server from a text file or based on a server.
  By default, Setup installs all these features.
• If your license includes configurations for several seats, you need to install the additional temporary license files for NemSLock server after the installation (see below).

Transferring the user administration from the old server (if users are available)

• You can find the user administration in the program folder of the license server. Copy the "users.mcf" file to the program folder of the new license server.
• Stop the license server service on the new server before you copy the file. To do this, start the "stopService.bat" program, which is also in the program folder of the license server.
• After copying, start the license server service again. To do this, use the "startService.bat" program.

Returning the registered licenses

• Open NemSLock 2006 Server Console on the old server by clicking the icon on the desktop or Start -> (All) Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
• Click "Stop server".
• Click "Modules".
• Click "Transfer license permanently".
• Confirm the following dialog boxes. Click “Browse”.Windows Explorer starts and opens the folder with the hcws-format file. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.Send this file by email to register@nemetschek.de.
• We will send you an email, confirming that we have received the licenses.
• You always have to return all licenses.
• After you have done this, they are only valid for two more days.

Registering the license(s) on the new server

• Open NemSLock 2006 Server Console on the new license server.
• Click "Modules" on the left.
• Select the seat you want to register. If your license contains configurations for several seats, read the notes further down.
• Click "Registration request (register.txt)".
• Click "Edit".
• Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
• Click "Create registration request".Windows Explorer starts and opens the folder with the "register.txt" file. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.Send the registration request by email to register@nemetschek.de.

If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.

How to install licenses

• Open NemSLock 2006 Server Console.
• Click "Stop server" on the left.
• Click "Modules" on the left.
• Click ”Browse” to navigate to the registered license file.
• Click "Install license file".
• After this, you can start the server again by clicking "Start server".

Configuring the clients

• Now you need to change each client to the new license server.
• Click Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
• If the license server window is hidden, click "Configure NemSLock Server"at the bottom. It is a good idea to lock this window. All you need to do is click the drawing pin icon.
• Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
• Now the user can select one of the seats provided. Click "Close" to complete the configuration. Now you can start Allplan.
• After having successfully connected to the license server, clear the check boxes for the trial licenses in the area at the top.

Notes:

• If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
• 2014-1 and later: If the latest version of License Manager is installed (file version 1. 0. 26. 153 or later, see License Manager- Options- System), you can also select several licenses. If one of the selected licenses is currently being used by someone else, the program will automatically select the next available license.
• Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
• The license server and the licenses are downward compatible; they can be used in conjunction with older Allplan versions.

Question:

How can I give individual users the right to see and select specific seats on the license server? And how can I deny users this right?
Sometimes, it may be necessary that a specific user does not see the seat with, for example, the terrain option so that this user cannot use this seat inadvertently.


Answer:

Using WebAdmin, you can give users rights for specific seats on the license server.
Please note the following points:

1. Before you start, check that at least CodeMeter Version 6.50 is installed on the license server.
Start CodeMeter Control Centeron the server.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen. Enter Codemeter and press ENTER. Select Help -> About to see which version of CodeMeter is installed. If the version displayed is older than version 6.50, you must install the latest version of CodeMeter Control Center. Go to the following website
and download the CodeMeter User Runtime for Windowsprogram.

https://www.wibu.com/de/anwendersoftware.html

2. Open WebAdmin. Start CodeMeter Control Centeron the server again.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen, enter Codemeter and press ENTER. A dialog box opens. Click WebAdminat bottom right.

Or
Enter Localhost:22350in the address bar of your browser.

3. Go to "Configuration -> Server -> License Access Permissions".
Select Mode: Advanced.

4. Go to "Advanced Mode Configuration -> Specific access rules -> Add Firm Code"and select "6000100 - Allplan GmbH". Click Add. "Specific access rules"now inlcude "6000100 - Allplan GmbH".





5. Click "Add Product Code"to select the seat for which you want to define access rights. However, this is only possible if the "Distinction based on Product Item Text" check box is selected.
The "Note" section below in this FAQ lists the abbreviations given at the end of each seat. These abbreviations represent the license contents.
Select the required seat and click "Add" again. Repeat these steps to assign more seats.





6. After having defined the product code, you can now assign an access rule.
By default, all users are allowedto access this seat.
Select the product code you just defined and click "Add new access rule".
Click "User" and enter the required user.
When you click in the field next to "User", you can see all available users with their domain names.
Select the user or enter the user manually. For example, enter DOMAINNAME\SSample and select the right you want to assign to this user by clicking "Allow" or "Deny".

If the default setting is "Allow", you can thus deny users access to the license. If the default setting is "Deny", you can thus allow users to access the license again.
You can add more rules. When you have configured all rules, click "Apply" to apply the changes.

7. You need to restart CodeMeter Service so that the changes take effect.
To do this, select CodeMeter Control Center -> Process -> Stop CodeMeterServiceand then click Restart CodeMeter Service.Before you restart the service, make sure all users have closed Allplan.


Information:

Client access can be defined by one of the following parameters: computer name, IPv4 subnet, user name or group name.
Enter the required parameter in the corresponding field. If you use an active directory, the program auto-completes entries in the "User" and "Group" fields.


Here comes a practical example:

Think about which setting is most useful to you. For example, you have two seats: seat 01 with 7 architecture licenses and seat 02 with 1 architecture license and 1 terrain license. Only two specific users should be able to use seat 02. If you want to deny all other users access to seat 02, you need to add seat 02 to specific access rules and define a rule for this seat 02. First, set the default setting to "Deny". Then, add these two users and select or "Allow" for these users. As a result, all other users can only see seat 01 and these two users can see seats 01 and 02.

However, if you want that these two users can only see seat 02, you need to add both seats to specific access rules and define a second rule for seat 01. Add these two users to this second role and select Deny for these two users. The default setting, which applies to all the other users, is still Allow. As a result, all other users can see seat 01 and these two users can only see seat 02.


Note:

The following abbreviations are used:

T Terrain
B Bamtec
W Workgroup
K Key Plan
M Bridge Modeler
L Cadastral plans for conduits
S Language option
V Visualization
A Architecture option
E Engineering option

Here are some examples:

Architecture:
"Allplan Architecture 2017”

Architecture + Terrain
"Allplan Architecture 2017 T"

Architecture + Bridge Modeler
"Allplan Architecture 2017 M"

Architecture + Terrain + Bridge Modeler
"Allplan Architecture 2017 TM"

Question:

What license issues do I need to consider when upgrading from Allplan 2019/2020/2021 to Allplan 2022?


Answer:

Installation options during Setups

Upgrade - program update with transfer of all project data, office and user settings.
The existing Allplan installation is upgraded to version 2022. If several Allplan versions are installed, only the latest version will be suggested for upgrade. Projects, office and user settings are automatically transferred from 2019/2020/2021 to Allplan 2022. Allplan 2019/2020/2021 is then no longer available.

New installation without transfer of project data, office and user settings:
Existing Allplan installations remain unchanged. Office and user settings are not transferred to version 2022. You can import projects after installation using the following Allplan function:
New project, open-> Import projects.

New installation with transfer of office and user settings:
Existing Allplan installations remain unchanged. Office and user settings are automatically transferred from 2019/2020/2021 to version 2022. In the case of multiple installed Allplan versions, only the most current version is suggested for transfer. If you have installed with a central file store, make sure that you create a folder with a suitable share on your central file store (server) beforehand. This folder can then be selected as the "central file storage folder" during setup. You can import projects after installation with the following Allplan function:
Project new, open-> Import projects.



Depending on the licensing system you use, you need to consider different points.

There is no license request when installing Allplan 2022. Therefore, make sure in advance that your licenses are also suitable for this version, e.g. by purchase or a valid service contract.

1. Upgrade Allplan 2022 – stand-alone workstation

Your license for Allplan 2022 will be updated after installation, when you start Allplan 2022 for the first time. Start Allplan 2022 and you will be prompted to update the license. Select "Update now" here. The license is updated online. You can then start Allplan 2022 directly or close the license window.

Note: To install Allplan 2022 on a new computer, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Transferring license to a new computer.

You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license

2. Upgrading Allplan 2022 with a license server

Start by updating your license(s) at the license server. After this, upgrade the clients. To do this, start the License Settings program on the server. Click License Activation on the left, and then click the license you want to update. Click Update License.

After the license(s) update, you can perform the Allplan upgrade installation on the client computers.

NOTE: Check the version of your installed license server on the server. Starting with the license server version 2016-1-4, the detailed version status (Build-ID) is displayed directly in the lower left corner of the License Settings program.
At least version 1.1196.xxx.xxx should be displayed here. If an older Build ID is displayed, then you still have an older license server in use. In any case, please update your license server. Download the software for the license server from the Allplan Connect service portal. Detailed instructions can be found at connect.allplan.com/license under the menu item Information on installation and Licensing' and the instructions 'Updating license server and licenses'.

Note: You can update the licenses only at a license server you have already installed. If you want to switch to Allplan 2022 and move the license server to a new server, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Moving license server to a new server.

You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license


Downloading licenses from Allplan Connect
You can also obtain your activation codes for Allplan 2022 IBD in the Allplan Connect service portal.
To do this, click Profile > License Management.

You can only use this function as an administrator.

Question:

What license issues do I need to consider when upgrading from Allplan 2020/2021/2022 to Allplan 2023?

Answer:

Installation options during Setups

Upgrade - program update with transfer of all project data, office and user settings.
The existing Allplan installation is upgraded to version 2023. If several Allplan versions are installed, only the latest version will be suggested for upgrade.  Projects, office and user settings are automatically transferred from 2020/2021/2022 to Allplan 2023. Allplan 2020/2021/2022 is then no longer available.

New installation without transfer of project data, office and user settings:
Existing Allplan installations remain unchanged. Office and user settings are not transferred to version 2023. You can import projects after installation using the following Allplan function:
New project, open-> Import projects.

New installation with transfer of office and user settings:
Existing Allplan installations remain unchanged. Office and user settings are automatically transferred from 2020/2021/2022 to version 2023. In the case of multiple installed Allplan versions, only the most current version is suggested for transfer. If you have installed with a central file store, make sure that you create a folder with a suitable share on your central file store (server) beforehand. This folder can then be selected as the "central file storage folder" during setup. You can import projects after installation with the following Allplan function:
Project new, open-> Import projects.



Depending on the licensing system you use, you need to consider different points.

There is no license request when installing Allplan 2023. Therefore, make sure in advance that your licenses are also suitable for this version, e.g. by purchase or a valid service contract.


1. Upgrade Allplan 2023 – stand-alone workstation

Your license for Allplan 2023 will be updated after installation, when you start Allplan 2023 for the first time. Start Allplan 2023 and you will be prompted to update the license. Select "Update now" here. The license is updated online. You can then start Allplan 2023 directly or close the license window.

Note: To install Allplan 2023 on a new computer, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Transferring license to a new computer.

You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license

2. Upgrading Allplan 2023 with a license server

Start by updating your license(s) at the license server. After this, upgrade the clients. To do this, start the License Settings program on the server. Click License Activation on the left, and then click the license you want to update. Click Update License.
After the license(s) update, you can perform the Allplan upgrade installation on the client computers.

NOTE: Check the version of your installed license server on the server. Starting with the license server version 2016-1-4, the detailed version status (Build-ID) is displayed directly in the lower left corner of the License Settings program.
At least version 1.1196.xxx.xxx should be displayed here. If an older Build ID is displayed, then you still have an older license server in use. In any case, please update your license server. Download the software for the license server from the Allplan Connect service portal. Detailed instructions can be found at connect.allplan.com/license under the menu item Information on installation and Licensing' and the instructions 'Updating license server and licenses'.


Note: You can update the licenses only at a license server you have already installed. If you want to switch to Allplan 2023 and move the license server to a new server, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Moving license server to a new server.

You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license


Downloading licenses from Allplan Connect
You can also obtain your activation codes for Allplan 2022 IBD in the Allplan Connect service portal.
To do this, click Profile > License Management.
You can only use this function as an administrator.
 

Question:

What license issues do I need to consider when upgrading from Allplan 2021/2022/2023 to Allplan 2024?

Answer:

Installation options during Setups

Upgrade - program update with transfer of all project data, office and user settings.
The existing Allplan installation is upgraded to version 2024. If several Allplan versions are installed, only the latest version will be suggested for upgrade.  Projects, office and user settings are automatically transferred from 2021/2022/2023 to Allplan 2024. Allplan 2021/2022/2023 is then no longer available.

New installation without transfer of project data, office and user settings:
Existing Allplan installations remain unchanged. Office and user settings are not transferred to version 2024. You can import projects after installation using the following Allplan function:
New project, open-> Import projects.

New installation with transfer of office and user settings:
Existing Allplan installations remain unchanged. Office and user settings are automatically transferred from 2021/2022/2023 to version 2024. In the case of multiple installed Allplan versions, only the most current version is suggested for transfer. If you have installed with a central file store, make sure that you create a folder with a suitable share on your central file store (server) beforehand. This folder can then be selected as the "central file storage folder" during setup. You can import projects after installation with the following Allplan function:
Project new, open-> Import projects.



Depending on the licensing system you use, you need to consider different points.

There is no license request when installing Allplan 2024. Therefore, make sure in advance that your licenses are also suitable for this version, e.g. by purchase or a valid service contract.


1. Upgrade Allplan 2024 – stand-alone workstation

Your license for Allplan 2024 will be updated after installation, when you start Allplan 2024 for the first time. Start Allplan 2024 and you will be prompted to update the license. Select "Update now" here. The license is updated online. You can then start Allplan 2024 directly or close the license window.

Note: To install Allplan 2024 on a new computer, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Transferring license to a new computer.

You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license

2. Upgrading Allplan 2024 with a license server

Start by updating your license(s) at the license server. After this, upgrade the clients. To do this, start the License Settings program on the server. Click License Activation on the left, and then click the license you want to update. Click Update License.
After the license(s) update, you can perform the Allplan upgrade installation on the client computers.

NOTE: Check the version of your installed license server on the server. Starting with the license server version 2016-1-4, the detailed version status (Build-ID) is displayed directly in the lower left corner of the License Settings program.
At least version 1.1196.xxx.xxx should be displayed here. If an older Build ID is displayed, then you still have an older license server in use. In any case, please update your license server. Download the software for the license server from the Allplan Connect service portal. Detailed instructions can be found at connect.allplan.com/license under the menu item Information on installation and Licensing' and the instructions 'Updating license server and licenses'.


Note: You can update the licenses only at a license server you have already installed. If you want to switch to Allplan 2024 and move the license server to a new server, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Moving license server to a new server.

You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license


 

Question:

What license issues do I need to consider when upgrading from Allplan 2015/2016/2017 to Allplan 2018?



Answer:

Depending on the licensing system you use, you need to consider different points.


1. Upgrading stand-alone workstations

1a. Stand-alone workstation - upgrading from Allplan 2016 or 2017
The license for Allplan 2018 updates automatically. Start Setup and follow the instructions displayed. When you are prompted to select the license file, click ‘Use active license’.
Follow the instructions and install Allplan.

Note: Licenses only update automatically when you upgrade. If you want to install Allplan 2018 on a new computer, read the following instructions: https://connect.allplan.com/en/faqid/20150618131629.html

You can find your Product Key in Allplan Connect as usual. Go to http://connect.allplan.com/license

1b. Stand-alone workstation - upgrading from Allplan 2015
Allplan 2016 introduced a new protection system. Licensing is now based on CodeMeter by Wibu Systems AG. You require a Product Key for Allplan. Start Setup and follow the instructions displayed. When you are prompted to select the license file, click 'License activation'. Enter your Product Key (26-digit code) and click 'Activate license'. By activating the license, you connect the license with the computer. Follow the instructions and install Allplan.
You can find detailed information at
https://connect.allplan.com/en/faqid/20150618130717.html




2. Upgrading license server workstations

2a. License server workstations - upgrading from Allplan 2016 or 2017
Start by updating your license(s) at the license server. After this, upgrade the clients.

Check the version of the license server. If you use the license server 2016-1-4 or later, you can find the version number (Build-ID) at bottom left in the License Settingsprogram. The version number should be at least 1.614.x.x. If you cannot find the Build-ID, you work with an older license server. In this case, update the license server first. Download the software for the license server from Allplan Connect.

You can find detailed information at
https://connect.allplan.com/en/faqid/20160527114300.html

After having updated the licenses, you can upgrade Allplan at the clients. Start Setup and follow the instructions displayed. The license server license will be detected automatically on the network. When you are prompted to select the license file, click 'Use active license'. Follow the instructions and install Allplan.

Note: You can only use an existing license server to update licenses. If you want to use a new license server with Allplan 2018, read the following instructions:
https://connect.allplan.com/en/faqid/20150618134224.html

You can find your Product Key for Allplan 2018 in Allplan Connect as usual. Go to http://connect.allplan.com/license


2b. License server workstations - upgrading from Allplan 2015
Start by installing the license server. After this, upgrade the clients.
You can find detailed information at
https://connect.allplan.com/en/faqid/20150618084450.html

Downloading licenses from Allplan Connect

You can find your license for Allplan 2014 BCM and the activation code for Allplan 2018 IBDin Allplan Connect. As an extra servicewe provide the old licenses for hardlock stand-alone workstations, the temporary licenses for NemSLock and the Product Keys for the new software protection system. Click
Profile > License administration.
Only administrators can use this function.


License for Allplan Allfa 2017
You will get your license by mail from customercare@allplan.com. So that we can create the license for you, please send us your IP address or the Host ID of the Allfa database server (Oracle)

Question:

What license issues do I need to consider when upgrading from Allplan 2018/2019/2020 to Allplan 2021?


Answer:

Installation options during Setups

First-time installation with copying data (default): this option copies and converts the data of the previous version to the new version. You can choose to transfer projects, too. This option does not change the previous version.
Upgrade: this option also transfers the data to the new version. However, you can no longer use the previous version after upgrading.
First-time installation: this option installs Allplan 2021 parallel to the version you are running. However, your data will neither be transferred nor converted. You can find more information in the help. Just press F1 during Setup.


Depending on the licensing system you use, you need to consider different points.

1. Upgrade Allplan 2021 – stand-alone workstation

The license for Allplan 2020 updates automatically. Start Setup and follow the instructions displayed. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.

Note: The licenses only update automatically when you upgrade. To install Allplan 2020 on a new computer, please read on connect.allplan.com/license within the menu item Information on Installation and Licensing the instructions Transferring license to a new computer.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license

2. Upgrading Allplan 2021 with a license server

Start by updating your license(s) at the license server. After this, upgrade the clients. To do this, start the License Settings program on the server. Click License Activation on the left, and then click the license you want to update. Click Update License.

After updating your license(s) you can upgrade Allplan at the clients. Start Allplan Setup and follow the instructions displayed. The license server license will be detected automatically on the network. When you are prompted to choose the license configuration, select Use active license. Follow the installation instructions.

NOTE: Check the version of your installed license server on the server. Starting with the license server version 2016-1-4, the detailed version status (Build-ID) is displayed directly in the lower left corner of the License Settings program.

The latest version 1.1196.xxx.xxx should be displayed here. If an older Build ID is displayed, then you still have an older license server in use. In any case, please update your license server. Download the software for the license server from the Allplan Connect service portal. Detailed instructions can be found at connect.allplan.com/license under the menu item Information on installation and Licensing' and the instructions 'Updating license server and licenses'.

Note: You can update the licenses only at a license server you have already installed. If you want to switch to Allplan 2021 and move the license server to a new server, please read on
connect.allplan.com/license within the menu item Information on Installation and Licensing the
instructions Moving license server to a new server.
You can find your Product Key in Allplan Connect as usual. Go to: connect.allplan.com/license


Downloading licenses from Allplan Connect
You can also obtain your activation codes for Allplan 2021 IBD in the Allplan Connect service portal.
To do this, click Profile > License Management.

You can only use this function as an administrator.


License for Allplan Allfa 2019
You will get your license by mail from customercare@allplan.com. So that we can create the license for you, please send us your IP address or the Host ID of the Allfa database server (Oracle).

Question:

How can Allplan detect the Nvidia Optimus system correctly?



Answer:

Every time Allplan starts, it checks which graphics card is available to the graphics engine (hardware-based graphics accelerator for designing in Allplan). If there is a hybrid chip set such as the Optimus system, Allplan can choose between the integrated graphics card (not suitable for 3D applications) and the "real" graphics card that meets the requirements. As the integrated graphics card does not meet the system requirements, Allplan starts in GDI+ mode. In this mode the entire calculation of the on-screen display is diverted to the processor, which considerably increases the computation time as particularly older processors have problems with large volumes of data. However, this also applies to some series of current processors.

If you use a Dell Precision M4600, HP or LENOVO device and the procedure described in this FAQ does not produce the desired result, please contact us again by sending an email including a precise description of the device to support.de@allplan.com


General procedure

Please make sure that Allplan 2012-1 is installed as earlier versions do not provide a routine for detecting the Optimus system.

The following link takes you to the latest Allplan 2012 version in the Connect forum:https://connect.allplan.com/en/support/downloads.html


To inform the graphics engine of the Optimus system, do the following:

Start by downloading the latest Nvidia graphics card driver, which you can find at the following link:

http://www.nvidia.de/Download/Find.aspx?lang=de

Install the driver with administrator privileges and restart the computer after the installation.

Switch off vertical synchronization in the Nvidia Control Panel:

Click on the desktop with the right mouse button -> NVIDIA Control Panel -> 3D Settings -> Manage 3D Settings -> Global Settings -> Basic Profile.

You can find vertical synchronization at the bottom. Set "Vertical Synchronization" from "Use the 3D application setting" to "Off". To save the settings, click "Apply". Close the Nvidia Control Panel.

When running Windows 7, you need to set the Windows Power Options to "High performance". Open the Control Panel -> Hardware and Sound -> Power Options -> Select a power plan, Show additional plans -> High performance and close the Control Panel.


Now you have configured the Optimus system and Windows for Allplan 2012 and the graphics engine uses the Nvidia graphics card.


Note:

The "High performance" power option applies to the entire system. This may affect battery life. When working on site or out of the office, you are advised to set the power option back to "Balanced" or "Power saver" to prolong battery life. This increases computation time as the system addresses the processor, memory and graphics card at slower clock rates to save power.

Question:

What license issues do I need to consider when upgrading from Allplan 2014/2015/2016 to Allplan 2017?



Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. Allplan 2017 uses this protection system, too.




1. Upgrading stand-alone workstations

1a. Stand-alone workstation - upgrading from Allplan 2016
The license for Allplan 2017 updates automatically. Start Setup and follow the instructions displayed. When you are prompted to select the license file, click 'Use active license'.
Follow the installation instructions.

Note: The licenses only update automatically when you upgrade. To install Allplan 2017 on a new computer, please read the following instructions: https://connect.allplan.com/en/faqid/20150618131629.html

You can find your Product Key in Allplan Connect as usual. Go to http://connect.allplan.com/license

1b. Stand-alone workstation - upgrading from Allplan 2014 or 2015
Start Setup and follow the instructions displayed. When you are prompted to select the license file, click 'License activation'. Enter your Product Key (26-digit code) and click 'Activate license'. By activating your license, you connect it with your computer. Follow the installation instructions.
You can find detailed information at
https://connect.allplan.com/en/faqid/20150618130717.html





2. Upgrading license server workstations

2a. License server workstations - upgrading from Allplan 2016
Start by updating your license(s) at the license server. After this, upgrade the clients.

Check the version of the license server. If you use the license server 2016-1-4 or later, you can find the version number (Build-ID) at bottom left in the License Settingsprogram. The version number should be at least 1.614.x.x. If you cannot see the Build-ID, you work with an older license server. In this case, update the license server first. Download the software for the license server from Allplan Connect.

You can find detailed information at
https://connect.allplan.com/en/faqid/20160527114300.html

After having updated the licenses, you can upgrade Allplan at the clients. Start Setup and follow the instructions displayed. The license server license will be detected automatically on the network. When you are prompted to select the license file, click 'Use active license'. Follow the installation instructions.

Note: You can update the licenses only at a license server you have already installed. If you want to switch to Allplan 2017 and move the license server to a new server, please read the following instructions:
https://connect.allplan.com/en/faqid/20150618134224.html
You can find your Product Key for Allplan 2016 in Allplan Connect as usual. Go to http://connect.allplan.com/license

2b. License server workstations - upgrading from Allplan 2014 or 2015

Start by installing the license server. After this, upgrade the clients.
You can find detailed information at
https://connect.allplan.com/en/faqid/20150618084450.html

Downloading licenses from Allplan Connect

You can find your license for Allplan 2014 BCM and the activation code for Allplan 2017 IBDin Allplan Connect. As an extra servicewe provide the old licenses for hardlock stand-alone workstations, the temporary licenses for NemSLock and the Product Keys for the new software protection system. Click
Profile > License administration.
Only administrators can use this function.

Question:

How can I move the license server to a new server?



Answer:
If you activated the license(s) online by entering a Product Key, you can return the license(s) and then use them on a different server. You can return licenses only if the server has Internet access.


Returning a license

To return a license in online mode

• Start the license server by opening the License Settings.
• Click License activationon the left. Then click the license you want to return.
• Click Return license.
• Do this for each license until you have returned all licenses.

You can now activate the license(s) on a different server.


To install the license server on the new server, download the software for the license server from Allplan Connect.
You can activate a license in online mode only if you have ...

• Internet access
• a Product Key

Installing the license server on the new server

• Start License Server Setupon the new server.
• Click Install.
• Start the license server by starting the License Settingsprogram. Go to the License activationarea, enter your Product Key and click Activate license.
• If you have more licenses for the license server, enter the respective Product Keys and activate the licenses.
• Afterwards, start CodeMeter Control Center.
  To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen, enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.
  
  Or Enter Localhost:22350in the address bar of your browser.

• Select Settings -> Server -> Access serverin the Network serverarea and click Activate.
• Click Apply.

Configuring the clients

The license server license will be detected automatically on the network; the clients display the license(s) provided by the new server.

Check the license selection in the license settings of the client:

Services application -> Utilities -> License settings -> License selection

Priority:
Select the check box in front of a license to select this license as a favorite. You can mark as many licenses as you want. Allplan will then prefer these licenses. Click to select one ore more licenses Allplan is not to use. If you do not select any license or if you have selected several favorites, Allplan will automatically use the first free license it finds.

Find license server automatically:
When you select this option, Allplan automatically detects a license server on the LAN. In some cases, such as VPN connections, Allplan may not be able to detect a server automatically. In this case, you can enter the server manually (see additional server name).
Note:Only the Windows administrator can change this option.

Additional server name:
If 'Find license server automatically' is not active or Allplan has not automatically found a license server, you can manually enter the name or the IP address of the server. If 'Find license server automatically' is active, you can enter an additional server. After having entered the server name, click Updateto see the licenses of the license server. Use semicolons to separate several server names.


Notes:

You can find detailed information on the license server in the License Settings help (F1 key).

Allplan communicates with the license server via TCP/IP. By default, communication is via Port 22350unless you change the port in CodeMeter WebAdmin.

If a firewall is active on your computer, you must enable port 22350 for TCP and UDP. If the firewall filters in an application-specific manner, you have to enable the CodeMeter.exe license server service. You can find this service in the %Program Files (x86)%\CodeMeter\Runtime\bin Windows folder. Define the CodeMeter.exe service as an exception in the firewall. Some anti-virus programs also include firewall functions. If you are not sure, contact the manufacturer of the anti-virus program.