Search
Create Reinforcement with pull-out dimensioning according to ISO 3766
Question:
How are the leg lengths and bending dimensions of a pull-out determined for a bar that is not bent at right angles?
Answer:
The leg lengths and dimension lines are calculated in accordance with ISO 3766 (03. 2004). ISO 3766 replaces the previous version
ISO 4066.
The small differences (max. 2 mm according to Fig. 1) result from rounding tolerances
Figure 1: Dimensioning of non-rectangular legs according to ISO 3766 with real iron representation.
Figure 2: Pull-out representation on the plan (bar axis)
Fig. 3: Drawing of a cranked bar according to ISO 3766 with real bar representation. The offset dimension is determined via the two outer edges of the vertical legs.
Figure 4: Pull-out representation on the plan (bar axis)
Hint:
We recommend including corresponding information in the bending stamp to avoid misunderstandings.