Support Forum

[Frage] SweepXYSection doesnt work with a closed 3D polyline

Alex_de_Groot
Alex_de_Gr…
24.08.2023 - 11:42 Uhr

Hello,

I want to use a L-Profile from the catalog and sweep it along a Closed Polyline, when the Profile is on the inside of the line it doesnt work when the polyline is closed.

I get the next message "SweepXYSection: Not possible to sweep the profile by the path"

It does work when the line is not closed or the profile is is on the outside of the line.

Does anyone know how i can solve this?

Anhänge (2)

img
Afbeelding 1.png
Typ: image/png
49-mal heruntergeladen
Größe: 63,75 KiB
SweepXYSection.avsprj
Typ: application/x-sqlite3
626-mal heruntergeladen
Größe: 132,00 KiB
Xinling
Xinling
24.08.2023 - 12:00 Uhr

I don't have the problem with simple closed profile. Can you check whether your geometry is valid for such sweep operation?

Product Owner API, Allplan GmbH

Anhänge (1)

img
sweep.png
Typ: image/png
64-mal heruntergeladen
Größe: 96,52 KiB
Alex_de_Groot
Alex_de_Gr…
24.08.2023 - 12:31 Uhr

I use a Profile from the Default Allplan libary. it works with a circel and when its outside a closed polyline. Just not when it is inside it.

Anhänge (3)

img
Afbeelding 2.png
Typ: image/png
28-mal heruntergeladen
Größe: 103,14 KiB
img
Afbeelding 3.png
Typ: image/png
40-mal heruntergeladen
Größe: 30,03 KiB
img
Afbeelding 5.png
Typ: image/png
40-mal heruntergeladen
Größe: 122,58 KiB
Alex_de_Groot
Alex_de_Gr…
24.08.2023 - 12:40 Uhr

If the path is a circel but not when it is a rectangle and its inside the path

Anhänge (1)

img
Afbeelding 6.png
Typ: image/png
29-mal heruntergeladen
Größe: 154,16 KiB
Xinling
Xinling
24.08.2023 - 14:37 Uhr

Hmm... You are right and it is weird...
As a workaround you can lift you cross section a little bit, it seems to work.

P.S. make sure it has a positive z value, a negative one also won't work...

Product Owner API, Allplan GmbH

Anhänge (1)

img
sweep2.png
Typ: image/png
40-mal heruntergeladen
Größe: 100,20 KiB
Alex_de_Groot
Alex_de_Gr…
25.08.2023 - 06:26 Uhr

It works if I lift it 100mm or more. It didnt work at the start because I work in mm.

Thanks for the help.