Why Allplan crashes or stop working and close every time when I try to import DWG.
- tryin without or with favorites
- trying only 2d
nothing solved the problem
Dear Allars,
Have you try to start Allplan with admin right? and check if this solve your issue?
If this fix the issue, you can set it the start with admin right per defaut by opening the property of the icone and set the special checkbox about.
If this doesn't help i will suggest to check other point.
Have you made a system test before install the version 2017 to be sure your hardware are okay?
Than you can also update your graphic card to see if this help.
In which operating system are you working?
This issue just happened of you get it since you use 2017 version?
Thank you for the feedback.
Let us know if you can find out.
Bye & Good Use!
Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support
Allplan France & Allplan Software Engineering
Depuis 2006
Dear Allars,
Have you try to start Allplan with admin right? and check if this solve your issue?
If this fix the issue, you can set it the start with admin right per defaut by opening the property of the icone and set the special checkbox about.
If this doesn't help i will suggest to check other point.
Have you made a system test before install the version 2017 to be sure your hardware are okay?
Than you can also update your graphic card to see if this help.
In which operating system are you working?
This issue just happened of you get it since you use 2017 version?
Thank you for the feedback.
Let us know if you can find out.
Bye & Good Use!
Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support
Allplan France & Allplan Software Engineering
Depuis 2006
Hello Allars,
maybe you have imported too much layers in project or std.
Have a look at external layers. You can only use approx. 32700 external or user-defined layers.
greetz
Jens Maneke
AAP Sommerfeld
>>> Stell Dir vor, es geht und keiner kriegts hin...
Dear sirs,
for now Allplan stops crashing. I thing here is no problem with too much layers.
I started software with admin rights and maybe this is the solution.
Thank you for help
