Hello everybody,
In the Python Part example that draws spiral reinforcement, when increasing the height or decreasing the spacing, it gives the following error.
What could be the reason for this?
Hello,
internally in Allplan a polyline is created for the spiral reinforcement. This polyline has a restricted number of points, which you reached with your dimensions.
Best regards
Horst
Hello,
internally in Allplan a polyline is created for the spiral reinforcement. This polyline has a restricted number of points, which you reached with your dimensions.
Best regards
Horst
Hi,
Try to reduce the number of points in the circular reinforcement
Best regards
Hatem
Hatem OZDEMIR
Architect | Allplan Trainer | BIM Manager
Website: http://www.mimcad.com
Website: http://www.bimakademi.com
e-mail: hatemozdemir[at]gmail.com
Ankara / Turkiye
LinkedIn-Profil
YouTube
Hi Mr. Hatem;
I tried the solution you suggested. It worked. However, I think pythonpart objects should be independent of system variables.Thank you for attention...
Hi Mr. ZHarput,
Although python part objects are independent of system variables, they use some features of allplan.
Hatem OZDEMIR
Architect | Allplan Trainer | BIM Manager
Website: http://www.mimcad.com
Website: http://www.bimakademi.com
e-mail: hatemozdemir[at]gmail.com
Ankara / Turkiye
LinkedIn-Profil
YouTube
