Support Forum

[Frage] replace pythonParts with reinforcement

Schlagworte:
  • Allplan
  • Allplan 2018
  • PythonParts
  • Reinforcement
  • Makros
Kriks777
Kriks777
15.02.2019 - 12:01 Uhr

Hello every one!
My question is about replacing several equal PythonParts with reinforcement if I need to correct some parameters of my PythonPart

for example staircases width is 1200 mm and now I need to change it to 1300 mm for all. To do it I've tried to use "replace macros SmartPart" function, but in the case of PythonParts only solid geometry is replaced correctly, and reinforcement is still in old position

maybe there is another function to do it

Thank you for answers!

Anhänge (1)

img
replace_macro_smartpart.png
Typ: image/png
28-mal heruntergeladen
Größe: 3,67 KiB
Bartekz
Bartekz
15.02.2019 - 12:36 Uhr *

Hmm, I don't know if I fully understand but if I had to correct several PythonParts I would correct one (enter settings by pressing 2 times mouse button on PP) and then copy corrected PP.

edit: Both shape and reinforcement are corrected automatically in that case. But still reinforcement labeling disappears...

Kriks777
Kriks777
18.02.2019 - 05:47 Uhr

Yes it works but this way is not productive enough if the project is quite big. I have attached little video for better problem definition.

Anhänge (1)

Parametric_objects_behavior.mp4
Typ: video/mp4
1516-mal heruntergeladen
Größe: 15,69 MiB
Bartekz
Bartekz
27.02.2019 - 08:39 Uhr

Well, I am not sure. I doubt whether there is another built-in function as there are many minor bugs/shortcomings connected with PParts. PParts is a great idea but it should be further developed :|