Support Forum

Allplan 2021-1 New PythonPart [Gelöst]


Hello.
When I select the 'Beam Bars' from the Allplan 2021 new python part Rebardetaling objects, I get a warning as shown in the picture below.
what would be the reason.
(Note: my video card and windows are up to date)

Anhänge (1)

Typ: image/png
51-mal heruntergeladen
Größe: 5,65 KiB

Lösung anzeigen Lösung verbergen

Hello,

to get the real problem I need to have a look at the trace output which is shown if the message box pops up. Preferred way is to change the trace output to "window". After this change you need to restart Allplan and execute the PythonPart till the message box is shown. In the trace window there are some Python errors listet. Please attach these output.

Best regards
Horst

1 - 10 (13)

Hello,

please copy the files from the attached PP_dev.zip file to the folder ...\ETC\PythonPartsScripts\PP_dev and check whether this solves your problem.

Best regards
Horst

Anhänge (1)

Typ: application/zip
938-mal heruntergeladen
Größe: 17,97 KiB

Unfortunately, problem not solved.

Hello,

if the message is shown, additional information is print in the Allplan trace window. Please show me this info.

Best regards
Horst

I am sharing it in the attachment.
Thanks.

Anhänge (2)

Typ: video/mp4
1131-mal heruntergeladen
Größe: 4,66 MiB
Typ: image/png
15-mal heruntergeladen
Größe: 5,65 KiB

Hello,

I need the additional info from the Allplan trace window. You can get it in a running Allplan by "ctrl+F3", select "Write into window", OK. After this you need to close Allplan and start it again. Then, if the message box is popped up, switch to the Allplan trace window and show me the output.

Best regards
Horst

I am sharing it in the attachment.
Thanks.

Anhänge (1)

Typ: application/zip
914-mal heruntergeladen
Größe: 332,47 KiB

Hello,
have you executed the PythonPart? I don't see any trace in the file.

Best regards
Horst

Unfortunately. Even though I uninstalled and reinstalled the program still the same problem persists.

Hello,

to get the real problem I need to have a look at the trace output which is shown if the message box pops up. Preferred way is to change the trace output to "window". After this change you need to restart Allplan and execute the PythonPart till the message box is shown. In the trace window there are some Python errors listet. Please attach these output.

Best regards
Horst

1 - 10 (13)

Verwendung von Cookies:
Um die Webseite optimal gestalten und fortlaufend verbessern zu können, verwendet Allplan Cookies.
Durch die weitere Nutzung der Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden.  -  Mehr Informationen

Schließen