I am user of Allplan 2014. My problem is as it follows below:
In order to prepare reinforcing drawing of a single foundation pad (position FH.5-look picture 1, bars numeration 1-9) I prepare the drawing in layer let say no.6 (I use drawing structure). To draw next position of foundation pad I use next layer let say no.7 (position FH.6-look picture 2,bars numeration 1-9) so that both drawing are separated because positions differ. Now in order to obtain reinforcement legend - list of positions+ammount of steel I do it in each drawing separately as well so that I have a list of steel only for one type of foundation(position FH.5 or FH.6). My question is:

Is it possible to obtain total list of reinforcement from both layers( for both position)? To precise my question, I would like to obtain list where bars numeration will be set so that I will be able to see reference to my foundation position. And the number will not be like 1-18 but 1-9 (with some subindex of position fh.5) and 1-9 (with subindex of position fh.6) - like a total list/report of reinforcement ready for steel manufacturer to avoid summation of every reinforcement list for each position.

PS. Drawings attached.

I am looking forward for your answer,
Greetings,
Jakub