Goodmorning, does anyone know what would be the best method to make a window as a sketch. Pink is brick, green is mortar. frame thickness 7 cm. Thank you for help. P.S. Please send also image with parameter window joke, thank you.
Support Forum
- Forum
- CAD Architektur
- CAD Architektur
Window
Hilfreichste Antwort anzeigen Hilfreichste Antwort verbergen
Hello,
You have to use a standard window but define your opening with "Facing" and/or "Rabbet".
___________
Dovete usare una finestra standard ma definire la vostra apertura con "Rivestimento" e/o "Incasso".
Im anderen Beitrag hatte ich eine mögliche Lösung bereits gepostet.
Diese arbeitet mit:
-Falz
-Verblendung
-negativem Abstand zur Öffnung beim Fenster-SmartPart
Wenn man den Putz als Seitenfläche des Raumes/Geschosses herstellt, wirds noch einfacher...
Thank you Bertrand and Nemo for your information. Nemo, it's possible give negative input for measure (1)? I don't think.
Anhänge (1)
It's possible in the SmartPart on the posted Teilbild.
Hi Nemo, thank you for your clarification. Another question....your SmartPart posted it's standard Allplan or you have changed some parameters in the script?
Have a look!
Anhänge (1)
Thank you Nemo, very good...I understand!
Hi Nemo, it's possible and how do you hide line (look ?) smartpart in print? Thank you for help.
Anhänge (1)
It is not possible, because the line is produced by the wall, not by the SmartPart.