Hello,

I've recently run into some problems that I've never had with previous versions of Allplan (those were the educational versions I used in college, but now I am working and using a licensed version specifically for Architecture).

Long story short, when I'm creating a wall using an arc or circular shape, I can't insert a door. As you can see in "Capture2.jpg", the symbol for the door is smaller than the opening. If I try to scale it, the program crashes and closes. If I manage to put a door opening in the wall, I can't set the width; it resets, as shown in "Capture2.jpg".

If by some miracle the opening is inserted into the wall, it's either way below or above it, and I can't set the measurements. I need to move it manually. If I do that, when I try to insert a 3D object from the library, it gives an error, as shown in "Capture1.jpg".

Lastly, if I'm trying to intersect a wall (with another wall or with a line) that is created in any other way than by using the line method, it's not happening. I need to manually extend them, but the other layers on the wall are not intersecting correctly, as you can see in "Capture.jpg".

What should I do? I'm at a loss and could use some help since I need to finish my work soon.