Support Forum

Exporting Allplan models in IFC format does not work

ricmerz
ricmerz
09.05.2020 - 14:59 Uhr

Exporting allplan models in IFC format does not work. The generated models have wrong levels. I have tried in several projects with the same result. In attachment A1, the original Allplan project level system.

Attachment A2 shows the level system resulting from importing into Allplan the same project, previously exported as IFC, directly from allplan. As you can see, the levels correspond correctly.

Attachment shows 3 the import in Allplan of the IFC generated by bimplus.

Anhänge (3)

img
A1.png
Typ: image/png
54-mal heruntergeladen
Größe: 146,85 KiB
img
A2.png
Typ: image/png
36-mal heruntergeladen
Größe: 120,60 KiB
img
A3.png
Typ: image/png
34-mal heruntergeladen
Größe: 146,91 KiB
ricmerz
ricmerz
13.05.2020 - 13:07 Uhr

The example above is a project whose structure is not IFC compliant. I have tried a new one from scratch, conforming to IFC.
The following screenshots show the results of the importation in Allplan

C1 Import report. In addition to the mapping problem, see that the windows have not been created
C2 Level structure: the floor structure is correct, but the drawing files are not on their corresponding floor. The level system is completely wrong.

Anhänge (2)

img
C2_LI.jpg
Typ: image/jpeg
23-mal heruntergeladen
Größe: 780,79 KiB
img
C2_LI.jpg
Typ: image/jpeg
17-mal heruntergeladen
Größe: 780,79 KiB
pavoln
pavoln
14.05.2020 - 07:29 Uhr

Hello,

thank you for reporting. We are investigating it and I will let you know as soon as I will have more info.

Best,
Pavol Nagy

pavoln
pavoln
20.05.2020 - 14:36 Uhr

Zitiert von: ricmerz
The example above is a project whose structure is not IFC compliant. I have tried a new one from scratch, conforming to IFC.
The following screenshots show the results of the importation in Allplan
C1 Import report. In addition to the mapping problem, see that the windows have not been created
C2 Level structure: the floor structure is correct, but the drawing files are not on their corresponding floor. The level system is completely wrong.

Dear Mr. Rizmerz,

I have not seen your attachment regarding "C1 Import report. In addition to the mapping problem, see that the windows have not been created".
Could you attach it here?

Thank you

ricmerz
ricmerz
21.05.2020 - 09:34 Uhr

Sorry, I attached twice C2 screeshot

Anhänge (1)

img
C1_LI.jpg
Typ: image/jpeg
35-mal heruntergeladen
Größe: 1,00 MiB