Hi,
When I create a Reinforcement Report the text next to the graphics is really small and unreadable. This is the case in reports made by allplan and in custom reports I made myself. Anybody know how to change this?
Thanks
Dear Wouter_W,
If you use reinforcement object like bars or mesh, you should refer to the correct setting in the configuration.
There is 2 possibility:
1° You can change the setting of the labeling of schema. On the setting menu for reinforcement/Label, there is definition of the label for the schema.
In my example, i doubled all value (5.00 and 4.00) to see a big difference. And it work well.
2° You can also use a factor setting which is on the same menu. Per default, the value is 0.70 but if you change to 1 or more, than you will see the text in bigger size.
Bye & Good Use!
Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support
Allplan France & Allplan Precast
Since 2006
Try to check the Text Parameter into the option
Freedom means the opportunity to be what we never thought we would be
Doesn't seem to make a diffrence to me.
Dear Wouter_W,
If you use reinforcement object like bars or mesh, you should refer to the correct setting in the configuration.
There is 2 possibility:
1° You can change the setting of the labeling of schema. On the setting menu for reinforcement/Label, there is definition of the label for the schema.
In my example, i doubled all value (5.00 and 4.00) to see a big difference. And it work well.
2° You can also use a factor setting which is on the same menu. Per default, the value is 0.70 but if you change to 1 or more, than you will see the text in bigger size.
Bye & Good Use!
Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support
Allplan France & Allplan Precast
Since 2006
The ratio setting did the job, Somehow it changed to 0.1 in my settings.
