20.11.2018 - 07:52
1. Allplan offers a maximum widht of meshe of 2.2 m. Can a meshe of 2.3 m be entered?
Thanks in advance
Support Forum
- Forum
- CAD Engineering
- CAD Engineering
[Frage] Widht of meshes [Gelöst]
Lösung anzeigen Lösung verbergen
22.11.2018 - 09:49
Faris,
Go to Tools, Defaults.... (Alati, Definicije....) and choose Cross-section catalogs (Katalozi presjeca).
Check / Edit catalogs for meshes, you probably have 6 x 2,2m meshes.
.....
EC2, xoxoxo
Check this out: https://www.pittini.it/wp-content/uploads/Catalogo-Reti-Standard-Gruppo-Pittini.pdf
20.11.2018 - 09:28
*
[Hilfreichste Antwort]
Hi Faris,
You can define custom mesh type and size in Cross-section catalogs. If your local mesh manufacturer can deliver 2,3m wide mesh, than create a custom cross-section catalog that corresponds to mesh sizes in your country.
See Online Help for more: https://help.allplan.com/Allplan/2019-0/1033/Allplan/index.htm#7253.htm
20.11.2018 - 17:21
*
Take the Mesh Q-524-A then you get it
Mit besten Grüßen!
Jürgen
Allplan Ingenieurbau V10 bis V2025
20.11.2018 - 17:55
Zitiert von: Allplan_er
Take the Mesh Q-524-A then you get it
I haven't Q-524-A
22.11.2018 - 07:03
witch version you have? 2018? German?
the meshes are in the Europe EC2- catalog....
Mit besten Grüßen!
Jürgen
Allplan Ingenieurbau V10 bis V2025
22.11.2018 - 09:49
[Lösung]
Faris,
Go to Tools, Defaults.... (Alati, Definicije....) and choose Cross-section catalogs (Katalozi presjeca).
Check / Edit catalogs for meshes, you probably have 6 x 2,2m meshes.
.....
EC2, xoxoxo
Check this out: https://www.pittini.it/wp-content/uploads/Catalogo-Reti-Standard-Gruppo-Pittini.pdf
23.11.2018 - 07:40
Zitiert von: JohanC
Faris,
Go to Tools, Defaults.... (Alati, Definicije....) and choose Cross-section catalogs (Katalozi presjeca).
Check / Edit catalogs for meshes, you probably have 6 x 2,2m meshes.
.....
EC2, xoxoxo
Check this out: https://www.pittini.it/wp-content/uploads/Catalogo-Reti-Standard-Gruppo-Pittini.pdf
THANKS JOHAN!!!