Hi all,
How to make the marked wall surface (green area) different color in the allplan program?
I just want to change the color, I don't change the wall.
thanks,
György Bruckner
Hi all,
How to make the marked wall surface (green area) different color in the allplan program?
I just want to change the color, I don't change the wall.
thanks,
György Bruckner
Hello,
You have several possibilities.
1- You make three walls for bottom, top with white color and the middle one with another color. But it is not easy to modify them...
2- You add another wall-layer where you need the special color, with a thickness less than 1 mm with specific parameters for bottom and top.
3- You add just a 3D surface (or a very thin 3D volume) with another color about 0.5 mm before the real wall.
...
It depends of what you need to get...
Hello,
You have several possibilities.
1- You make three walls for bottom, top with white color and the middle one with another color. But it is not easy to modify them...
2- You add another wall-layer where you need the special color, with a thickness less than 1 mm with specific parameters for bottom and top.
3- You add just a 3D surface (or a very thin 3D volume) with another color about 0.5 mm before the real wall.
...
It depends of what you need to get...
Hallo Bertrand_C,
Thanks your answer. it was a good idea, thanks.