Support Forum

[Frage] Wall coloring [Gelöst]

Schlagworte:

Hi all,

How to make the marked wall surface (green area) different color in the allplan program?
I just want to change the color, I don't change the wall.

thanks,
György Bruckner

Anhänge (1)

Typ: image/png
20-mal heruntergeladen
Größe: 627,81 KiB

Lösung anzeigen Lösung verbergen

Hello,
You have several possibilities.
1- You make three walls for bottom, top with white color and the middle one with another color. But it is not easy to modify them...
2- You add another wall-layer where you need the special color, with a thickness less than 1 mm with specific parameters for bottom and top.
3- You add just a 3D surface (or a very thin 3D volume) with another color about 0.5 mm before the real wall.
...
It depends of what you need to get...


Hello,
You have several possibilities.
1- You make three walls for bottom, top with white color and the middle one with another color. But it is not easy to modify them...
2- You add another wall-layer where you need the special color, with a thickness less than 1 mm with specific parameters for bottom and top.
3- You add just a 3D surface (or a very thin 3D volume) with another color about 0.5 mm before the real wall.
...
It depends of what you need to get...


Hallo Bertrand_C,

Thanks your answer. it was a good idea, thanks.

You're welcome!



https://connect.allplan.com/ verwendet Cookies  -  Mehr Informationen

Akzeptieren