Support Forum

Combine 2 rebar Label lines into 1. [Gelöst]

Schlagworte:

Hello, i couldn't find a direct answer in the forum so i hope someone can help.
I have two short questions regarding (1) joining 2 rebar labels into 1 and (2) starting the placement on both sides from 0 distance. There are times when there is 12cm left on displacement which could fit and extra bar with s=15cm.
Thank you in advance and please find attached an Illustration of my questions.

Anhänge (1)

Typ: image/png
140-mal heruntergeladen
Größe: 71,28 KiB

Lösung anzeigen Lösung verbergen

Ad1. (1.jpg)you can do it by superimposing dimension lines on yourself and (unfortunately) manual and adding 2x in front of the text.

You can insert additional text with position - >> description (unfortunately only 2 characters, the appropriate positions to be behind the "circle" must be set in the options)

Ad2. (2.jpg)You have to remember about this when unfolding the bars (creating the distribution of bars). You must set the concrete cover to 0. (3.jpg)You can change it later by setting a new distribution area and zeroing the concrete covers, and creating a new distribution with two clicks. (Remember that both concrete covers need to be set to 0, so set them to 0 before each click)
I also recommend this setting see green circle).

Anhänge (3)

Typ: image/jpeg
102-mal heruntergeladen
Größe: 306,48 KiB
Typ: image/jpeg
70-mal heruntergeladen
Größe: 43,49 KiB
Typ: image/jpeg
92-mal heruntergeladen
Größe: 229,51 KiB

Ad1. (1.jpg)you can do it by superimposing dimension lines on yourself and (unfortunately) manual and adding 2x in front of the text.

You can insert additional text with position - >> description (unfortunately only 2 characters, the appropriate positions to be behind the "circle" must be set in the options)

Ad2. (2.jpg)You have to remember about this when unfolding the bars (creating the distribution of bars). You must set the concrete cover to 0. (3.jpg)You can change it later by setting a new distribution area and zeroing the concrete covers, and creating a new distribution with two clicks. (Remember that both concrete covers need to be set to 0, so set them to 0 before each click)
I also recommend this setting see green circle).

Anhänge (3)

Typ: image/jpeg
102-mal heruntergeladen
Größe: 306,48 KiB
Typ: image/jpeg
70-mal heruntergeladen
Größe: 43,49 KiB
Typ: image/jpeg
92-mal heruntergeladen
Größe: 229,51 KiB

Thank you! It solved both my issues perfectly.


https://connect.allplan.com/ verwendet Cookies  -  Mehr Informationen

Akzeptieren