Hi,
The tools doors and windows can't create parallel arcs in walls with several leafs. Please, see the images to understand the problem.
How to do parallel arcs in this kind of window or door?
Thanks a lot!
Xavier C.A.
Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/
In this second sample, the difference between the perimetral arc and the internal arc is more visible. See the images.
Regards,
Xavier C.A.
Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/
Hi,
try a combination of the tools shown in the Picture.
Software: Allplan, Lumion, OM by Cycot, Simplebim, Nevaris...
Coachings unter http://www.cycot.de / Tutorials unter http://www.allplanlernen.de
See the attached ndw-file. First you create the contour of your window in 2d, then save it as a symbol. Now you choose the button as showed in the jpg attached. It´s a little bit tricky, but it works.
Gruß: T.
Thank Joerg and Thomas for your fast answers :-)
Well, we try the two methods. And those are our conclusions:
The first method is fast, but the result are arcs that isn't exactly parallels. See the images attached.
The second method is exact, but a bit slow. And we will have to create every symbols for every window with different width....
Is strange... Why the door and window tool don't create the parallel arcs directly?
Best regards Joerg and Thomas
Xavier C.A.
Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/
