Hallo,
gestern habe ich versucht ein Allplan Bridge Modell in Allplan zu importieren.
Es hat leider nicht funktioniert.
Diese Fehlermeldungen sind aufgetaucht.
Kann mir da jemand weiter helfen?
Hallo!
I had the similar problem when Allplan and Allplan Bridge were opened in the same time. Try to close Bridge and then start importing. For me, it was just with version 2022, 2021-without errors
Hallo!
I had the similar problem when Allplan and Allplan Bridge were opened in the same time. Try to close Bridge and then start importing. For me, it was just with version 2022, 2021-without errors
Thank you for your answer!
I tried it that way but it didn't work.
It just worked, when I ticked the button with ,,Import to active subimage" and with closing Bridge.
But now I have the problem, that the 3D Model is not in the right place. It is near the place where I want it to be.
Do you have any idea on why it is that way?
The Offsets are the same as in Allplan.
The white one is the 3D Model and the grey one is the exact lines where the 3D Model should be.
I tried it that way but it didn't work.
It just worked, when I ticked the button with ,,Import to active subimage" and with closing Bridge.
But now I have the problem, that the 3D Model is not in the right place. It is near the place where I want it to be.
Do you have any idea on why it is that way?
The Offsets are the same as in Allplan.
The white one is the 3D Model and the grey one is the exact lines where the 3D Model should be.
It's interesting.. I have couple of ideas, perhaps you did it already. First of all I set the first Global coordinate of the Axis in Bridge in Project settings like in screenshot. Than create Axis in according to your data. This coordinate you can copy from Allplan or Achsprotokoll (Achshauptpunktliste). Also its better to set Offset in Allpaln 0;0;0. In this case your model should uppload to the required Global coordinate.
In Bridge kenne ich mich nicht aus, aber generell bei Allplan: niemals mit 7-Stelligen Koordinaten ohne Offset arbeiten- bereits ab 5 Stellen sind Riesenprobleme vorprogrammiert. Soviel ich weiß wird max. Entfernung vom Nullpunkt ±5km empfohlen.
Gruß Alex
It's interesting.. I have couple of ideas, perhaps you did it already. First of all I set the first Global coordinate of the Axis in Bridge in Project settings like in screenshot. Than create Axis in according to your data. This coordinate you can copy from Allplan or Achsprotokoll (Achshauptpunktliste). Also its better to set Offset in Allpaln 0;0;0. In this case your model should uppload to the required Global coordinate.
I already did those things, but it still doesn't work. Thank you anyway.
Bis jetzt habe ich keine Probleme mit großen Koordinaten. Das hat bis jetzt immer geklappt.
Allplan Bridge ist halt noch eine andere Sache als das normale Allplan.
Hallo DuongHTR
Diese Problem hatte ich auch schon. Bin dann für die Lösung so vorgegangen:
1. Allplan Bridge schliessen
2. Im Allplan: Den ganzen Bridge-Bereich aus der Bauwerksstruktur rausgelöscht
3. Im Allplan: Die Funktion "Allplan Bridge Daten löschen" mit den Optionen "Verknüpfung mit Allplan Bridge Daten" und mit "Importierte Allplan Bridge Objekte" ausgeführt.
ACHTUNG! Die Option "Allplan Bridge Datenbank" löscht das ganze Allplan-Bridge Projekt!
4. Allplan neu gestartet.
5. Allplan Bridge neu importiert
Der Nachteil an dieser Methode ist allerdings, dass wahrscheinlich Assoziative Schnitte usw. verloren gehen, resp. die Verknüpfung davon...
Gruss yarn
