Результат поиска

1 - 4 (4)
  • 1
Версия:  Allplan 2018 / Allplan 2017 / Allplan 2016 / Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Последнее изменение: 15.11.2017
1 user(s) found this FAQ helpful

Question:

How can I update cross-section catalogs or install country-specific cross-section catalogs in Allplan 2011 and later?



Answer:

To install and save cross-section catalogs in Allplan 2011 and later, select Tools -> Defaults -> Cross-Section Catalogs. A dialog box opens. You can find a folder symbol and a disk symbol at bottom left.

To install cross-section catalogs, use the folder symbol. Another dialog opens, where you can select the cross-section catalog file you want to install. Select the file to be installed and click "Open" to confirm. This installs the corresponding cross-section catalog, which you can now use in Allplan.
To install country-specific cross-section catalogs, select the "Ing" folder, which was created when you installed Allplan. You can find it in the Allplan installation path (e.g., c:\Nemetschek\Allplan 201x\New\Ing - more information on the Allplan installation path is provided below in the "Notes" section).
This folder includes the country-specify cross-section catalog files.

To save a custom cross-section catalog, use the disk symbol. Another dialog opens, where you can select any folder to save the cross-section catalogs currently used in Allplan.



Note:

To update cross-section catalogs, you may need administrator privileges. If necessary, log on as an administrator before you start the update.

To use the cross-section catalogs for a specific project only, set the path settings for the cross-section catalogs of this project to project before you install the cross-section catalogs. In Allplan, open the "File" menu and select "Open Project..." Click the corresponding project with the right mouse button. Select "Properties". A dialog box opens. In the "Path settings" area, set the "Bar and mesh cross-section catalogs" to "Project".

To determine the path where Allplan is installed, use the Services application and select Service -> Hotline Tools-> showcfg. The Services application window shows the path of the Allplan installation folder.

The following abbreviations are used for the country-specific cross-section catalogs in the file names (axyzqusr.txt):
aut Austria
bel Belgium
bra Brazil
bul Bulgaria
deu Germany
eng England
fra France
hol Holland
hrv Croatia
ita Italy
kor Korea
pol Poland
rum Romania
rus Russia
slk Slovakia
svn Slovenia
swi Switzerland
tch Czech Republic
ung Hungary
usa USA

Загрузка PDF  FAQ_EN_Updating_cross-section_catalogs_(Allplan_2011...
Версия:  Allplan 2020 / Allplan 2019  | Последнее изменение: 07.10.2020 08:57
Not voted yet. Be the first to vote this FAQ as helpful!

Question:
How can I work together on a project with a partner from another country?

Answer:
Using Allplan 2019 and later, you can work on projects across countries.
You can define projects in a country-specific manner. This means that a project gets the resources (for example, hatching, patterns, layers and so on) and reinforcement settings of a specific country. Depending on your license, you can install one or more additional country packages. For example, you can then create a project with resources and settings for Germany and another one with resources and settings for the UK.


Requirements:

Whether you can use country packages depends on the Allplan license.

Only the ‘Cubed’ and ‘Exponential’ license types include country packages.
These license types enable you to use as many country packages as you like. You can create and open projects with any country code.

The ‘Lineared’ and ‘Squared’ license types only include one country package by default. This also applies to all conventional license types such as ‘Architecture’ and ‘Engineering’. In other words, you can only create and open projects with this country code.

Installing country packages:

When installing Allplan 2019 for the first time or upgrading from Allplan 2018 or earlier, you must explicitly install the additional country packages.

A default installation onlyinstalls the country package of your country. If you want to use different country packages, you must do a custom installation. Only a custom installation allows you to select the country packages you want to install.
You can do this whenever you want - be it the first installation or an upgrade or update.

Doing a custom installation:
Start Setup.

Select Customfor the Setup type.
When it comes to selecting Features, you can select the language packages you want to install.
You can see a list of all Allplan languages included in your license.
After this, you can select the countries. Select the country packages you want to install.
Click ‘Next’ to confirm all other dialog boxes.

Note:Please note that the more country packages you select, the longer the installation will take and the more hard disk space will be required.

Using country packages in Allplan:

You must define the country when you create a project. You cannot change the country later.

Creating a new project:
When creating a new project, you can select the county in country-specific templates.
Select the country and the template you need.

If you do not select a project template, you must select the required country in the next dialog box.


In the project:
The status bar shows the country set for a project.
The units for length entries and reinforcement set in the Options are project-specific settings. These units are preset depending on the country selected.



Important note:
  • When checking out a project in a workgroup environment, you can choose which country-specific office standard you want to check out.
  • Click in the ‘License Settings’ to see which countries are included in your license.
  • There is a default country, which is usually the country entered in your license. Setup always installs the data for this default country in the STD and ETC folders. During installation, Setup creates a STD.??? folder and an ETC.??? folder for each additionalcountry package selected (??? stands for the country code). The office path and default path are always based on the country set for the project that is currently open. That is to say, when you open a project and save a favorite or library element in the office path or default path, these elements will only be available in projects with the same country settings. ProjectPilot is an exception; here, the office path and default path always refer to the STD and ETC folders.


Загрузка PDF  FAQ_EN_Country-specific_projects_-_working_together_...
Версия:  Allplan  | Последнее изменение: 07.07.2017
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

How can I access the FTP server of technical support?



Answer:

You can download data from and upload data to the FTP server.

To access our FTP server, you require a current Windows operating system. Do the following:

Please enter the following address in Windows Explorer (do not use Internet Explorer!):

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de


1. Downloading data:
You can find our data in the /Download folder.
Right-click the folder(s) or file(s) you want to download and select "Save Target As ...".
Specify where you want to copy the data by selecting a folder on your computer.

If customers agree, we can provide customer-specific data in the /Customerfolder.
For this, you will get separate instructions.


2. Uploading customer data:
If we agree, customers can upload data to the /Upload folder.



Notes:

  • You can upload only files. You cannot upload folders to the server. If you want to upload an entire project, please save this project to a ZIP file first.
  • You can also use Internet browsers to access the FTP server. However, there are some restrictions. Use an FTP client program (for example, FileZilla)to avoid errors. This makes it easier for you to upload and download data. See the following information.
  • Login details for FTP program:
    Address:
    ftp.nemetschek.de
    Login:
    nemhotline
    Password:
    ha37jvg8f
Загрузка PDF  FAQ_EN_Data_on_FTP_server_.pdf
Версия:  Allplan 2020 / Allplan 2019 / Allplan 2018  | Последнее изменение: 24.10.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

How can I switch Allplan from German to English?



Answer:

Allplan 2018 is the first version to include English in the license by default.
This means that by installing Allplan 2018, you automatically install the English version too.
As a result, you can switch languages using the Services application.

Important! This switch only applies to the program itself.
The content of the defaults (standards and country-specific content) does not change and is still in German.

Before starting Allplan, you can select the language using the Services application.
To do this, select Configuration -> Language. ‘Current setting’ shows the language currently selected.
Select the required language in the area at the bottom, that is, English.
A German default license only includes German and English.





Allplan now starts in English.



Note:

If English is not included in the Services application, you can install this language (or other languages you purchased) at any time.

All you need to do is download the current installation package of the version you use. You can find this package at www.connect.allplan.com

During installation, select Update installationand Use active license.

Select Customfor the Setup type.

When it comes to selecting Features, select the required language(s) in the ‘Language packages’ area.
This area lists the languages included in your license.
Do not change the other settings and click ‘Next’ to confirm the following dialog boxes.




After installation, start the Services application-> Configuration -> Language. Select the required language.

Загрузка PDF  FAQ_EN_Using_Allplan_in_English.pdf
1 - 4 (4)
  • 1
https://connect.allplan.com/ uses cookies  -  More information

Accept