MINIMÁLNÍ POŽADAVKY:

• Procesor Intel / AMD Ryzen
• 4 GB RAM
• 10 GB volného místa na pevném disku
• OpenGL 4.2 kompatibilní grafická karta s pamětí 4 GB RAM, rozlišení 1920 x 1080
• Pro nástroj Redshift použijte níže uvedené doporučení.

DOPORUČENÉ POŽADAVKY:

• Procesor Intel Core i5, i7 nebo i9 / AMD Ryzen 5, 7 nebo 9
• 32 GB RAM
• Úložiště SSD
• Rozlišení displeje až 4 K
• Vulkan 1.2 nebo OpenGL 4.5 kompatibilní grafická karta s 16 GB RAM, grafická karta podle certifikace: allplan.com/info/graphiccards
• Pro použití nástroje Redshift Renderer vezměte prosím v úvahu také: maxon.net/en/ requirements/redshift-requirements

PODPOROVANÉ OPERAČNÍ SYSTÉMY:

• Windows 11, Verze 21H2
• Windows 10, 64-Bit, Verze 21H2*
• Windows Server 2022, Standard-Edition (pro Citrix)
• Windows Server 2019, Standard-Edition (pro Citrix)
• Windows Server 2016, Standard-Edition (pro Citrix)

PODPOROVANÉ DATOVÉ SERVERY:

• Windows Server 2022
• Windows Server 2019
• Windows Server 2016
• Windows Storage Server 2022 pro NAS

DOPORUČENÍ PRO OPERAČNÍ SYSTÉM:

• Windows 11, Verze 21H2

DOPORUČENÍ PRO DATOVÝ SERVER:

• Windows Server 2022

VAROVÁNÍ NAS/DFS:

• NAS (Network Attached Storage) je podporován pouze s Windows Storage Server.
• DFS (Distributed File System) s Allplanem není podporován; může to vést k haváriím, zablokování a smazaní souborů.

*LTSC-Edition 2019/2021 je také podporována

• MacBook Pro or iMac (from 2020) Intel, M1 or M2
• 32 GB RAM
• 120 GB free hard disk space

• macOS 13.3 Ventura
• Parallels Desktop 18 Pro Edition for Mac
• Windows 11, version 22H2

NOTES

• On M1/M2 Processor some components are not supported: Cineware/Redshift rendering and export/import to Cinema 4D.
• Dirvers for large printers (plotter) are not available for all printers for Windows ARM. A workaround is, to export a PDF and print this PDF on a computer with supported driver for large printers.
• The setup checks the system requirements, which are not fulfilled. To install Allplan anyway, you have to use the bypass checkbox.
• A trial license cannot be used under Parallels.
• Since Parallels Desktop does not support current OpenGL, Allplan uses GDI+; the graphics card is therefore shown as "unsuitable" in the system test.

ADDITIONAL INFORMATION:
Information can be found on the Parallels Website: parallels.com

Otestujte si svůj systém a zkotrolujte si, zda váš hardware odpovídá požadavkům aktuální verze programu Allplan 2023.

Stažení systémového testu 2023

MINIMUM SERVER SETUP FOR UP TO 5 ALLPLAN USERS:

• Intel Xeon processor or compatible
• 48 GB RAM
   

RECOMMENDED SERVER SETUP FOR UP TO 5 ALLPLAN USERS:

• 2 x Intel Xeon processor with at least 2 GHz each
• 128 GB RAM
• Server graphics card for vGPU Usage (e.g. NVIDIA Grid) with at least 8 GB per user
   

RECOMMENDED SERVER SETUP FOR MORE THAN 5 ALLPLAN USERS:

• You need a separate server for every five Allplan users. Make sure that each server meets the requirements stated above.

• Citrix Virtual Desktops Standard 7.2303 - Windows Server 2019 x64
• Citrix Workspace App (2303) for Windows 23.3.0.55
• VM Ware ESX 6.7.0 Release 7.0.3.21686933
• Windows 10 Pro 22H2 or Windows 11 22H2 Pro
• WIBU License server on a separate server
• Allplan 2023-1-1
   

NOTES/RESTRICTIONS:

• The Allplan performance under Citrix depends on the network performance and can be somewhat slower compared to local installations.
• An external connection requires a high-performance setup: a latency of not more than 20 milliseconds; download bandwidth of at least 16 Mbit/s (recommended: 25 Mbit/s); upload at least 5 Mbit/s.
• You are advised to set the size of the crosshairs to off (cursor only) in the Allplan options.

Hardware doporučený pro servery Citrix se liší v závislosti na verzi systému Windows Server Edition. Doporučení pro tato vydání naleznete na webových stránkách společnosti Microsoft:
microsoft.com

Informace o konfiguraci, optimalizaci a spuštění Citrix naleznete na webové stránce Citrix:
support.citrix.com

NETWORK:

• An internet connection that is stable and uninterrupted.
• Minimum requirements: 10 Mbit/s for upload; 20 Mbit/s for download, the latency must be less than 50 milliseconds (you can check this by means of Allplan Performance Diagnostics, for example).
• Recommended: 50 Mbit/s for upload; 100 Mbit/s for download, the latency must be less than 10 milliseconds (you can check this by means of Allplan Performance Diagnostics, for example).
• Current network drivers
• Network connections based on LAN (better than WLAN)
   

LOCAL FILE STORAGE FOLDER:

• If possible, use a local (SSD) hard drive for the local file storage folder; network drives slow down access. The local file storage folder must not be shared between several users; this might cause massive problems. The Services window shows the path of the local file storage folder.
• You can find information on how to change the path of the local file storage folder in a FAQ on Allplan Connect; for example, enter the following search term: “local file storage folder Allplan Share”.
   

HARDWARE:

• The hardware requirements are the same as those for Allplan.

• You have an Allplan Bimplus/Allplan Connect/Allplan Campus account
• An Allplan Bimplus team is available
• To create Allplan Share projects, you have to be the team owner or team administrator of the Allplan Bimplus team
• You have one or more Allplan Share licenses

Stáhněte si Systémové požadavky Allplan Bimplus