Hi there,

This is still possible but at a moment when you have the function activated it ask you to select the desired models or section. When you click on the outer boundary of the section you want to take a section from it will work. In the picture you see when the function ask you to select what you want to make a section from and you also can pick a section by clicking the blue outer line. After that you can make the section line in the section and it will generate the desired section from a section.

Hope it will work at your side also like this.

Also the old sections can be used but they are not in the Actionbar. You need to add them yourself via Actionbar configurator. But I would advice to first try the new sections because I can imagine the old ones will drop out Allplan at a time.

Kind regards,

Nick

Regards Primož,

We have started working on reinforcement plans for some smaller but demanding projects with new cross-sections and we are currently facing many problems. We use v. 2021.
I don’t know if there is a general problem with the new cross sections because we were working in v. 2018 and it worked really well. Problems occur only when we are drawing reinforcement in new sections.I must mention that we work through a network manager.