22.01.2025 - 12:41
Hi, does anyone know how to make the hole marked in red in the attached sketch?
Support Forum
- Forum
- CAD Architektur
- CAD Architektur
[Frage] Hole
22.01.2025 - 13:41
hey Danilos,
try the polygonal niche,recess,slot... function (no idea if this is correctly translated into English ;) )
Anhänge (1)
22.01.2025 - 13:46
there is a lintel function, but i am not sure if it suits your needs. because the Cross-sectional shape is always a rectangle
22.01.2025 - 15:04
Zitiert von: Florian_Keim
hey Danilos,
try the polygonal niche,recess,slot... function (no idea if this is correctly translated into English ;) )
try the polygonal niche,recess,slot... function (no idea if this is correctly translated into English ;) )
Thank you Florian for your indication but in your example there are not the return (jambs+architrave) on window. Look my sketch!
22.01.2025 - 15:31
here a drawing file with a one layer wall, maybe i dont understand your sketch ;)
Anhänge (1)
22.01.2025 - 15:48
Zitiert von: Florian_Keim
here a drawing file with a one layer wall, maybe i dont understand your sketch ;)
The wall of my sketch is with 3 layers (30cm + 4cm insulating + 1cm plaster)
23.01.2025 - 10:11
Zitiert von: Florian_Keim
result is the same
Hi, sorry if I insist but I don't think it's the same. In my example the 2 external layers (4 and 1 cm) also go inside the window hole (shoulders and architrave made with the "covering" function)
24.01.2025 - 15:31
Hi, does anyone know how to make the hole in the attached sketch so that in the print layout it appears as a sketch OK?
24.01.2025 - 16:14
see attached video