I purchased the license server. How can I install and configure the license server?
Allplan is using since version 2016 a new protection system. Licensing is based on CodeMeter by Wibu Systems AG since then. You can no longer use NemSLock Server with Allplan 2016 and higher.
Allplan requires a Product Key. Using this key, you can activate your license online. The Product Key is a unique, 26-digit character string. You can use it to activate a license for Allplan.
You can find your Product Key in Allplan Connect. Go to http://connect.allplan.com/license
Note: The license is downwards compatible til version Allplan 2016-1-4 even if a higher version is displayed.
To install the license server, download the software for the license server from Allplan Connect
or from our FTP server:
The Wibu license server is part of the CodeMeter driver, which is installed along with Allplan. If you have already installed Allplan on the license server, you do not have to install additional software. But you can also install the license server separately; you do not have to install Allplan.
In any case, install and activate the license server before you install Allplan on the clients.
You can activate a license in online mode only if you have ...
- Internet access
- a Product Key
- a license server license; you cannot use other licenses with the license server.
Installing the license server
- You must install the license server on a 64-bit Windows system.
- Start License Server Setup on the computer you want to use as the license server.
- Click Install.
- Start the license server by starting the License Settings program. Go to the License activation area, enter your Product Key and click Activate license.
- If you have more licenses for the license server, enter the respective Product Keys and activate the licenses.
- Afterwards, start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen: enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.
Enter Localhost:22350in the address bar of your browser.
- Select Configuration -> Server -> Access server in the Network server area and click Activate.
- Click Apply.
Configuring the license server (optional)
You can use the CodeMeter WebAdmin application to administer the license server.
To start and stop the license server service, you can use CodeMeter Control Center.
- CodeMeter Control Center -> Action -> Start or Stop CodeMeter Service
By default, all users on the LAN, who have installed the CodeMeter driver, can use a license from the license server.
- Basic access control: you can enter a list of client computer names or IP addresses that are allowed to access the license server.
- Advanced access control: you can specify global access rules (for all licenses) to control access to the licenses.
To activate license tracking, you have to set the HKEY_LOCAL_MACHINE\SOFTWARE\WIBU-SYSTEMS\CodeMeter\Server\CurrentVersion\LogLicenseTracking registry entry to 1 and restart CodeMeter Service.
After having activated this key, you can use CodeMeter WebAdmin to create a report showing details about the licenses used over a specific period of time. To do this, open CodeMeter WebAdmin and go to the 'Server' - 'License Tracking' page. Select the period of time and the license for which you want to generate a report. Then click 'Create report'. If you click a single bar, you will get detailed analyses per day or per hour.
CodeMeter WebAdmin saves the reports to C:\ProgramData\CodeMeter\Logs.
Installing and configuring clients
Note for Version 2016: Install at least Allplan 2016-1-4 on the clients.
The license server license will be detected automatically on the network.
Install Allplan on the clients. When you are prompted to select the license file, click Use active license. Follow the installation instructions.
- You do not need to activatethe clients.
Allplan automatically finds the license server on the local network. If you have not selected a license, Allplan automatically selects the first available license.
After having installed Allplan on the clients, you can use the 'License Settings' dialog boxto configure license selection.
Services application -> Utilities -> License settings
- License activation: this area is not relevant to clients taking their license from the license server.
- License selection: use this section if you get the license from a license server or if you have several licenses and you want to select the preferred license.
- Start as a viewer: click this button if you want to start Allplan as a viewer.
You can see the names of the available licenses with their seat numbers.
The 'Available' column indicates how many licenses are still available. Click the dropdown arrow to see a list of users currently working with a license.
Select the check box in front of a license to select this license as a favorite. You can mark as many licenses as you want. Allplan will then prefer these licenses. Click to select one ore more licenses Allplan is not to use. If you do not select any license or if you have selected several favorites, Allplan will automatically use the first free license it finds.
Find license server automatically:
When you select this option, Allplan automatically detects a license server on the LAN. In some cases, such as VPN connections, Allplan may not be able to detect a server automatically. In this case, you can enter the server manually (see Additional server name).
Note: Only the Windows administrator can change this option.
Additional server name:
If 'Find license server automatically' is not active or Allplan has not automatically found a license server, you can manually enter the name or the IP address of the server. If 'Find license server automatically' is active, you can enter an additional server. After having entered the server name, click 'Update' to see the licenses of the license server. Use semicolons to separate several server names.
You can find detailed information on the license server in the License Settings help (F1 key).
Allplan communicates with the license server via TCP/IP. By default, communication is via Port 22350 unless you change the port in CodeMeter WebAdmin.
If a firewall is active on your computer, you must enable port 22350 for TCP and UDP. If the firewall filters in an application-specific manner, you have to enable the CodeMeter.exe license server service. You can find this service in the %Program Files (x86)%\CodeMeter\Runtime\bin Windows folder. Define the CodeMeter.exe service as an exception in the firewall. Some anti-virus programs also include firewall functions. If you are not sure, contact the manufacturer of the anti-virus program.
How to install and run NemSLock Server?
Before installing, check whether the package you received includes the following items:
- Temporary licenses for NemSLock Server, e.g. 1234567a_001_psd.nslsrv
- Temporary licenses for clients, e.g. 1234567a_001_psd_client.nslock
How to install NemSLock Server
- Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:
- Select one of the temporary license files for NemSLock Server. These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
- When you opt for the “Custom” setup type, you can choose between the following program features:
You can use this program to administer NemSLock Server. You can also install the console on more workstations so that you can administer the server from a number of different locations. However, you can only connect one console to the server at any one time.
The actual license server.
This tool analyzes the log files of NemSLock Server.
By default, Setup installs all these features.
If you have several temporary licenses for NemSLock Server, use the server console to install the remaining licenses after the installation. The procedure is described in the section "How to install licenses".
How to register licenses
- Open NemSLock 2006 Server Console by clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
- Click "Modules" on the left.
- Select the seat you want to register. If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.
- Click the "Registration request (register.txt)" button.
- Click "Edit".
- You must fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
- Click "Create registration request". Windows Explorer opens and shows the register.txt file. If this window is closed, you can find this file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is:
C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License
- Now you can use all the options provided by Windows Explorer to copy the registration file to a computer with Internet access on the network. Alternatively, you can also use an USB stick. You can then email this file to us.
- Send the email with the registration request to firstname.lastname@example.org
How to install licenses
- Open NemSLock 2006 Server Console.
- Click "Stop server" on the left.
- Click "Modules" on the left.
- Click "Browse" to navigate to the registered license file.
- Click "Install license file".
- After this, you can start the server again by clicking "Start server".
How to set up users (optional)
- predefined user ALLis created automatically. If there is no other user, each user is given the privileges of the user ALL. By default, this user can use all licenses but cannot check out any licenses. By double-clicking the user, you can change the user's privileges.
- predefined user ALLallows all users to use licenses. In order to do this, the users must be able to access the server. You do not need to create individual user profiles until you want to assign specific rights to individual users or limit access to selected users. predefined user ALL. If you want to work only with individual users, you should deactivate the predefined user ALL by revoking the user's right to use licenses.
- predefined user ALL has administrator privileges unless another user is created and appointed as the administrator. As soon as you have appointed an administrator, ALL no longer has administrator privileges.
- You can enter users in the “Users.mcf” file. predefined user ALL has administrator privileges again. In addition, each user can once again administer the license server using the console.
- The administrator user is not a special user. If there are several administrator users, only one administrator user can start the console for this license server at any one time.
- If you are setting up users without giving administrator privileges to anyone, the program will ask you whether you want to appoint yourself as the administrator.
You can also specify a domain (user authentication for Windows server). However, this is not mandatory. If you do not specify a domain, the program uses the Windows user name for each user.
The program writes the user accounts and the associated access rights as ASCII text to the users.mcf file.
You can find this file in the \Programs folder of the NemSLock Server installation. You cannot rename, delete or move this file. If the program can no longer connect to this file, you must exit NemSLock Server, restart it and enter all users again from scratch. predefined user ALLis retained.
Experienced administrators can use the PowerShell script NemGenUsers.ps1. This file is in the \Programs folder of the NemSLock Server installation or you can find it as an FAQ in Allplan Connect:
How to install and configure clients
- Use one of the nslock license files you received to install the clients. Do not use the trial license or the license server license. It is irrelevant which of the client licenses you use, as the actual license will come from the license server later.
- You do not need to register the clients.
- When switching from Hardlock to NemSLock (server), you need to update the client using a nslock license file.
After having installed the client, you need to switch to the license server:
- Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
- If the license server window is not visible, select "Configure NemSLock Server" at the bottom. Lock this window. All you need to do is click the drawing pin icon.
- Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
- Now the user can select one of the seats provided.
- After having successfully connected to the license server, clear the check boxes for the trial licenses in the area at the top.
- Click "Close" to complete the configuration. Now you can start Allplan.
- If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
- 2014-1 and later: If the latest version of License Manager is installed (file version 1. 0. 26. 153 or later, see License Manager- Options- System), you can also select several licenses. If one of the selected licenses is currently being used by someone else, the program will automatically select the next available license.
- Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
- The license server and the licenses are downward compatible; they can be used in conjunction with older Allplan versions.