I purchased the license server. How can I install and configure the license server?
Allplan is using since version 2016 a new protection system. Licensing is based on CodeMeter by Wibu Systems AG since then. You can no longer use NemSLock Server with Allplan 2016 and higher.
Allplan requires a Product Key. Using this key, you can activate your license online. The Product Key is a unique, 26-digit character string. You can use it to activate a license for Allplan.
You can find your Product Key in Allplan Connect. Go to http://connect.allplan.com/license
Note: The license is downwards compatible til version Allplan 2016-1-4 even if a higher version is displayed.
To install the license server, download the software for the license server from Allplan Connect
or from our FTP server:
The Wibu license server is part of the CodeMeter driver, which is installed along with Allplan. If you have already installed Allplan on the license server, you do not have to install additional software. But you can also install the license server separately; you do not have to install Allplan.
In any case, install and activate the license server before you install Allplan on the clients.
You can activate a license in online mode only if you have ...
- Internet access
- a Product Key
- a license server license; you cannot use other licenses with the license server.
Installing the license server
- You must install the license server on a 64-bit Windows system.
- Start License Server Setup on the computer you want to use as the license server.
- Click Install.
- Start the license server by starting the License Settings program. Go to the License activation area, enter your Product Key and click Activate license.
- If you have more licenses for the license server, enter the respective Product Keys and activate the licenses.
- Afterwards, start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen: enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.
Enter Localhost:22350in the address bar of your browser.
- Select Configuration -> Server -> Access server in the Network server area and click Activate.
- Click Apply.
Configuring the license server (optional)
You can use the CodeMeter WebAdmin application to administer the license server.
To start and stop the license server service, you can use CodeMeter Control Center.
- CodeMeter Control Center -> Action -> Start or Stop CodeMeter Service
By default, all users on the LAN, who have installed the CodeMeter driver, can use a license from the license server.
- Basic access control: you can enter a list of client computer names or IP addresses that are allowed to access the license server.
- Advanced access control: you can specify global access rules (for all licenses) to control access to the licenses.
To activate license tracking, you have to set the HKEY_LOCAL_MACHINE\SOFTWARE\WIBU-SYSTEMS\CodeMeter\Server\CurrentVersion\LogLicenseTracking registry entry to 1 and restart CodeMeter Service.
After having activated this key, you can use CodeMeter WebAdmin to create a report showing details about the licenses used over a specific period of time. To do this, open CodeMeter WebAdmin and go to the 'Server' - 'License Tracking' page. Select the period of time and the license for which you want to generate a report. Then click 'Create report'. If you click a single bar, you will get detailed analyses per day or per hour.
CodeMeter WebAdmin saves the reports to C:\ProgramData\CodeMeter\Logs.
Installing and configuring clients
Note for Version 2016: Install at least Allplan 2016-1-4 on the clients.
The license server license will be detected automatically on the network.
Install Allplan on the clients. When you are prompted to select the license file, click Use active license. Follow the installation instructions.
- You do not need to activatethe clients.
Allplan automatically finds the license server on the local network. If you have not selected a license, Allplan automatically selects the first available license.
After having installed Allplan on the clients, you can use the 'License Settings' dialog boxto configure license selection.
Services application -> Utilities -> License settings
- License activation: this area is not relevant to clients taking their license from the license server.
- License selection: use this section if you get the license from a license server or if you have several licenses and you want to select the preferred license.
- Start as a viewer: click this button if you want to start Allplan as a viewer.
You can see the names of the available licenses with their seat numbers.
The 'Available' column indicates how many licenses are still available. Click the dropdown arrow to see a list of users currently working with a license.
Select the check box in front of a license to select this license as a favorite. You can mark as many licenses as you want. Allplan will then prefer these licenses. Click to select one ore more licenses Allplan is not to use. If you do not select any license or if you have selected several favorites, Allplan will automatically use the first free license it finds.
Find license server automatically:
When you select this option, Allplan automatically detects a license server on the LAN. In some cases, such as VPN connections, Allplan may not be able to detect a server automatically. In this case, you can enter the server manually (see Additional server name).
Note: Only the Windows administrator can change this option.
Additional server name:
If 'Find license server automatically' is not active or Allplan has not automatically found a license server, you can manually enter the name or the IP address of the server. If 'Find license server automatically' is active, you can enter an additional server. After having entered the server name, click 'Update' to see the licenses of the license server. Use semicolons to separate several server names.
You can find detailed information on the license server in the License Settings help (F1 key).
Allplan communicates with the license server via TCP/IP. By default, communication is via Port 22350 unless you change the port in CodeMeter WebAdmin.
If a firewall is active on your computer, you must enable port 22350 for TCP and UDP. If the firewall filters in an application-specific manner, you have to enable the CodeMeter.exe license server service. You can find this service in the %Program Files (x86)%\CodeMeter\Runtime\bin Windows folder. Define the CodeMeter.exe service as an exception in the firewall. Some anti-virus programs also include firewall functions. If you are not sure, contact the manufacturer of the anti-virus program.
How can I update cross-section catalogs or install country-specific cross-section catalogs in Allplan 2011 and later?
To install and save cross-section catalogs in Allplan 2011 and later, select Tools -> Defaults -> Cross-Section Catalogs. A dialog box opens. You can find a folder symbol and a disk symbol at bottom left.
To install cross-section catalogs, use the folder symbol. Another dialog opens, where you can select the cross-section catalog file you want to install. Select the file to be installed and click "Open" to confirm. This installs the corresponding cross-section catalog, which you can now use in Allplan.
To install country-specific cross-section catalogs, select the "Ing" folder, which was created when you installed Allplan. You can find it in the Allplan installation path (e.g., c:\Nemetschek\Allplan 201x\New\Ing - more information on the Allplan installation path is provided below in the "Notes" section).
This folder includes the country-specify cross-section catalog files.
To save a custom cross-section catalog, use the disk symbol. Another dialog opens, where you can select any folder to save the cross-section catalogs currently used in Allplan.
To update cross-section catalogs, you may need administrator privileges. If necessary, log on as an administrator before you start the update.
To use the cross-section catalogs for a specific project only, set the path settings for the cross-section catalogs of this project to project before you install the cross-section catalogs. In Allplan, open the "File" menu and select "Open Project..." Click the corresponding project with the right mouse button. Select "Properties". A dialog box opens. In the "Path settings" area, set the "Bar and mesh cross-section catalogs" to "Project".
To determine the path where Allplan is installed, use the Services application and select Service -> Hotline Tools-> showcfg. The Services application window shows the path of the Allplan installation folder.
The following abbreviations are used for the country-specific cross-section catalogs in the file names (axyzqusr.txt):
tch Czech Republic
How can I change the company logo and address details for all reports?
After having created a report, you can adjust the address and logo in the parameters. However, these settings only apply to the current report and they are not saved.
To adjust the defaults and thus to change the settings for all reports, select Tools -> Defaults -> Office Name and Addressin Allplan.
Enter the required information and select a bitmap file for the logo.
Now these defaults are used for each report you create. You can still adjust them in the report viewer after you have created the report.
If you are working in a workgroup environment, only users with administrator privileges can change these defaults.
The information you enter for the office name and address, lines 1 and 2, is displayed both in reports and in lists.
What can I do if Allplan no longer starts after I have upgraded and the following messages appear?
After this, Quality Reporter displays an error report.
Exit Allplan on all workstations and do the following:
Open the Services application and make a note of the path to the 'central file storage folder', which is displayed in the Services application window.
In addition, check whether the workgroup manager line is followed by 'Yes' or 'No'.
Open the central file storage folder in Windows Explorer.
If the workgroup manager line is followed by
'Yes', open the NET subfolder.
'No', open the PRJ subfolder.
Find the 'project.dat' or 'project.Dat.xm' file in the NET or PRJ folder and rename it 'project-old.dat'.
After this, do the following:
Services application -> Service -> Hotline Tools -> reorg -> OK -> Restore project management file -> OK
The program creates a new, correct project management file and you can start Allplan again.
If you come across error messages while doing this, please email the following information to email@example.com:
- Describe exactly what you did before the error or crash occurred.
- The error message itself (as a screenshot).
- The log file (trace).
- A Hotinfo support request with question 01.
Can I "automate" the installation of Allplan?
You can install Allplan 2017 in silent mode. This installation mode is fully automatic; you do not need to enter anything. Silent installation is particularly useful if you want to install Allplan 2017 with the same settings on a large number of workstations on a network.
Requirements for installing in silent mode:
Pay attention to the different licensing types!
Licensing for stand-alone workstations:
Make sure you have not yet activated a license on the computer where you want to record silent installation. Use the Viewer option for recording.
After having installed all computers in silent mode, you must use the Product Key to activate the license locally on each computer.
To activate the license after installation:
- Open the 'License settings' dialog box: Services application -> Utilities -> License settings
- Click License activationon the left.
- Enter your Product Key.
- Click Activate license.
Using a license server:
- The clients take the licenses from a license server.
- The license server is installed.
- The license of the license server is activated.
For more information on the license server, go to https://connect.allplan.com/en/faqid/20150618084450.html
Use the Use active licenseoption for recording.
Setup writes the license settings to the %AppData%\Nemetschek\Lic3.ini file.You must distribute this file to all computers.
Some more tips:
- Before you start installing, unzip the Allplan installation package (for example, using the 7_Zip program). Make sure this package is in a folder that can be accessed by all clients you want to install.
- Start the command prompt for running the setup program always as a local administrator. To do this, open the shortcut menu and select "Run as administrator". Make sure you always start the command prompt from the correct folder.
- Setup will automatically install any Microsoft components required by Allplan such as Microsoft .NET-Framework or Microsoft Report Viewer without prompting you to confirm.
Preparing to install in silent mode
To record and run silent installation, you need the installation files of Allplan 2017.
Installing in silent mode involves three steps:
Creating the log file for installing in silent mode
Start by installing Allplan 2017 with the /r option on a typical workstation. During installation, Setup automatically writes all entries to a log file named setup.iss. You can then use this file to install the program on the other workstations.
Installing in silent mode
Next, install Allplan 2017 with the /s option on all other workstations. Installation is based on the setup.iss log file you created in the first step.
Checking the installation
Finally, you should check the setup.log file, which was created automatically during setup, to see whether everything was installed correctly.
Note: When installing in silent mode, Setup usually uses the same setup.iss file to install the program on all workstations. However, you can edit some settings of the setup.iss file if you want to adjust paths. You can find more information in the help; see Adjusting the setup.iss filehttp://help.allplan.com/Allplan/2017-0/1031/Allplan/index.htm#331.htm
To install Allplan in silent mode, do the following:
Install .NET 4.6
Silent setup requires you to install .NET 4.6 in advance. The reason for this is that you have to reboot the computer after installation of .NET 4.6. This reboot would interrupt silent installation.
After you have downloaded the installation files, you must unzip these files before you can use them to install in silent mode.
- Unzip the zip file downloaded. This results in an .exe file (for example, Allplan 2017-0-5-cad.exe).
- Then unzip this .exe file using an appropriate program (for example, 7_Zip) and save the resulting file to any folder. You can now use the command prompt to start Setup.exe for recording.
1. Sample installation:
Start by creating a record file. To do this, run setup with the settings you need. You only need to do this once.
Use the command prompt to start this installation with the "/r" option (for record):
To run the setup program, open the command prompt as a local administrator and type the following:
Setup starts and runs as usual.
When you are prompted to choose the license configuration, select the Use vieweroption.
When you are prompted to choose the license configuration, select the Use active licenseoption.
Setup logs the entire installation process, writing everything to the setup.iss file.
If you want, you can change the name and folder of this file:
setup.exe /r /f1<folder>:\Setup.iss
setup.exe /r /f1c:\Setup.iss
This saves the file directly to C:\.
There must not be any blanks between "f1" and the folder!
Copy the setup.iss file to a folder that can be accessed by all clients you want to install. It is a good idea to copy this file to the folder with the Allplan installation files.
Copy the %AppData%\Nemetschek\Lic3.inifile to the %AppData%\Nemetschek folder of every client.
If you install Allplan on a client for the first time, you must create the Nemetschek folder in %AppData% first (for example, C:\Users\Username\Appdata\Roaming\Nemetschek).
2. Silent installation:
Make sure you can access the setup.iss file.
Make sure the Lic3.ini file is in the %AppData%\Nemetschek\ folder.
Setup logs the entire installation process again, writing everything to the setup.log file. You can find this file in the same folder as the setup.iss file. With the /f2 option, you can specify a different folder and file name for the setup.log file.
To start installing Allplan in silent mode on a client, open command prompt as a local administrator and type the following:
setup.exe /s /f1<folder>:\Setup.iss /f2<folder>:\Setup.log
setup.exe /s /f1c:\Setup.iss /f2c:\Setup.log
This saves the file directly to C:\.
Check the setup.log file to see whether everything has been installed correctly. The [ResponseResult] section should return the 'ResultCode=0' value.
If you have several licenses or license servers, select the required license for each client using the Services application - Utilities - License settings.
Refer to the online help for detailed information on installing in silent mode.
To open the help system, press the F1 key during setup. Go to the "Contents" tab, select "Installing" and then "Installing in silent mode".
You can also find information in the help for the license settings:
Services application -> Utilities -> License settings
To open the help system, press the F1 key. Go to the "Contents" tab, select "Licensing Allplan using a license server" and then "Installing in silent mode".
Please note that we cannot provide support for this installation method.
Allplan starts as a viewer. What can I do?
Do the following:
1. The Allplan license folder contains the servcfg.nse file.
Open this folder:
Services application -> Service -> Windows Explorer -> General program data (ETC, LIC) -> License.
Delete the servcfg.nse file from this folder.
2. Install the new, appropriate license, which you can find in the attached file. Save the license to a folder on your computer and install it as follows:
Services application -> Utilities -> License -> Install HARDLOCK License
3. Check that the light indicator of the connected USB dongle (blue or white stick) is on all the time. To test it, you can connect the dongle to a different port.
4. Install the current hardlock driver if the light indicator is off.
You can find detailed instructions here:
5. Select the Services application -> Utilities -> License -> License settings -> Licenses.
Check if "Allplan FT" is displayed in the white window on the left. If this is so, Allplan has accepted the dongle.
If this is not so, send the logmes.nse file, info.001 file and the new servcfg.nse file (license folder) to firstname.lastname@example.org
How can I access the FTP server of technical support?
You can download data from and upload data to the FTP server.
To access our FTP server, you require a current Windows operating system. Do the following:
Please enter the following address in Windows Explorer (do not use Internet Explorer!):
1. Downloading data:
You can find our data in the /Download folder.
Right-click the folder(s) or file(s) you want to download and select "Save Target As ...".
Specify where you want to copy the data by selecting a folder on your computer.
If customers agree, we can provide customer-specific data in the /Customerfolder.
For this, you will get separate instructions.
2. Uploading customer data:
If we agree, customers can upload data to the /Upload folder.
- You can upload only files. You cannot upload folders to the server. If you want to upload an entire project, please save this project to a ZIP file first.
- You can also use Internet browsers to access the FTP server. However, there are some restrictions. Use an FTP client program (for example, FileZilla)to avoid errors. This makes it easier for you to upload and download data. See the following information.
- Login details for FTP program:
During installation I get an error message saying that SetupSchedTaks.exe does not work anymore.
When I try to start Allplan or the Services application, the following message appears:
The program cannot start; api-ms-win-crt-runtime-l1-1-0.dll is missing.
This problem is caused by missing DLl files, which are required by Allplan. These DLL files usually come with the operating system. You will only see these messages if the operating system is not up-to-date. These messages are not caused by Allplan.
Instead, this problem is caused by the KB2999226 or KB2918614 (Universal CRT) Windows updates, which contain parts of Visual C++ Redistributable for Visual Studio 2015. Sometimes you cannot install these updates or they are defective.
If you have not yet installed these updates, install them now. In addition, install all available updates.
If you have already installed these two updates, try to install them again.
If the operating system is configured to automatically install Windows updates, some clients report errors during installation of the KB2918614 or KB29992226 package. These errors are caused by Windows, which blocks installation of files of the Visual Redistributable 2015 package. In this case, you must uninstall or delete the updates. After this, try to install the updates again.
If you cannot install the updates, do the following:
1. Deactivate automatic updates
2. Start -> Control Panel -> Windows Update -> change the settings -> never check for updates
3. Restart the computer
4. Download and install missing updates
5. Activate automatic Windows updates again
If you still cannot install the updates, run Windows diagnostics to check your system for update problems.
You can also install the updates manually. Use the following links:
Try this if you still cannot install the updates:
Regarding this error message, we cannot fix anything on the part of Allplan. These DLL files, which are required by Allplan, are an integral part of the Windows operating system.
Quality reporter notified us of a crash. In analyzing the data, we found that you can improve the stability of your Allplan installation by installing the current graphics card driver.
You can find the current driver on the homepage of the graphics card manufacturer.
http://www.amd.com/de Support & Driver -> Download driver
http://www.nvidia.de Download driver
Use the driver on the homepage of the manufacturer. Do not use the driver provided by Windows Update.
Notes for notebook users:
It is essential that you install the graphics card drivers provided by the notebook manufacturer! You can find the current drivers on the homepage of the manufacturer.
- If the program still crashes after you have installed the latest graphics card driver, change the graphics mode from OpenGL to GDI+ in Allplan.
Allplan 2012-1 and later:
Start Allplan and select Tools -> Options.
Select Desktop environment -> Display > Hardware acceleration - graphics area: switch off the "Use OpenGL for all viewports" option. Restart Allplan.
From Allplan 2011-1 to Allplan 2012-0-2:
Start the Services application.
Service -> Hotline Tools -> draw -> OK
On = OpenGL mode
Off = GDI+ mode
- You can find information on graphics cards at
How can I use data from the "Shell" module in Allplan 2017 and later?
Data conversion in Allplan 2017
Allplan 2017automatically converts shell data from earlier versions the first time you open the project or *.ndw file in question.
Alllayouts you created ofgeneral arrangement drawings and reinforcement drawings stay as they are!
The 3D reinforcement modelstays as it is!
Theshell entitybecomes a 3D solid.
The views and sections(including reinforcement) become 2D elements and text.
Editing the data
As the old shell entitybecomes a 3D solid(construction lines) and the 3D reinforcement model stays as it is, you can create new associative views and sections from the model data.
Before you can do this, you need to assign "normal" format properties to the 3D solid created from the shell entity, as you cannot create associative views and sections from a solid in construction line format.
You canplace, modify and labelthe reinforcement without any restrictions. You can create schemas, legends andreportsas usual.