Forum Allplan

[Domanda] Wir kriege ich eine gestrichelte Linie für eine Brüstung unter der Fensterbank? [Risolto]


Hallo Zusammen,

Bei unsere Fenster, möchten wir die Brüstungslinie gestrichelt haben (außenseite und unter der Fensterbank).
Wie können wir das am besten machen?

Anmerkung: Wir haben die Fenster aus dem Assistent geholt und die Fensterbänke scheinen nicht teil von den Fenster-Smartparts zu sein.

Wenn das möglicht ist, wie geht es mit den verschiedenen LoDs? sagen wir mal, wenn wir keine Fensterbänke ab 1:100 haben möchten, können wir sowas auch irgendwie machen? zB: 0-100 Fensterbank mit Brüstung gestrichelt. 100-1000 Keine Fensterbank

Vielen Dank im Voraus für die Hilfe

Mfg,
Fernando

Allegati (1)

Type: image/jpeg
51 scaricato
Size: 49,41 KiB

Show solution Hide solution

Hello Fernando,

You can use a macro in an opening (you had to do like that before the creation of SmartParts for opening).
The macro I sent you adapt to the dimensions of the opening.

To use it in an opening, store it in your Library or insert it in your drawing.
Do a right-click in the opening and use this function: "Makro, SmartPart in Öffnung einsetzen" (Insert Smart Symbol, SmartPart in Opening) (see online help).
Then, select the macro I sent you and it's done.

Make a try and you'll see...


Hallo Fernando,

müsste so eigentlich klappen ...

Gruss
Andree

Allegati (1)

Type: image/jpeg
107 scaricato
Size: 137,40 KiB

Quotato da: akoe_cycot
Hallo Fernando,
müsste so eigentlich klappen ...
Gruss
Andree

Hallo Andree,

Ja, aber dann sind beide Linien gestrichelt. Die innen liegende Linie soll normal sein, weil wir in der Stelle keine innere Fensterbank haben. Die außen liegende Linie soll gestrichelt sein, da sie unter der Fensterbank ist.

Wie machen Sie das normalerweise?

Vielen Dank im Voraus

Mfg,
Fernando

Hallo,

You can create a small macro with a dotted line on one side and a continuous line on the other side.
Set to hide the lines in scales 100-1000 and to display in scales 0-100.
Don't put lines on the opening and add this macro.
You'll get what you want.
_________________________________________
Google translation:

Sie können ein kleines Makro mit einer gepunkteten Linie auf der einen Seite und einer durchgehenden Linie auf der anderen Seite erstellen.
Stellen Sie ein, dass die Linien in den Skalen 100-1000 ausgeblendet und in den Skalen 0-100 angezeigt werden.
Setzen Sie keine Linien auf die Öffnung und fügen Sie dieses Makro hinzu.
Sie werden bekommen, was Sie wollen.


...
I added an example for Allplan 2019.


Allegati (1)

Type: application/octet-stream
832 scaricato
Size: 32,14 KiB

Quotato da: Bertrand_C
Hallo,
You can create a small macro with a dotted line on one side and a continuous line on the other side.
Set to hide the lines in scales 100-1000 and to display in scales 0-100.
Don't put lines on the opening and add this macro.
You'll get what you want.
_________________________________________
Google translation:
Sie können ein kleines Makro mit einer gepunkteten Linie auf der einen Seite und einer durchgehenden Linie auf der anderen Seite erstellen.
Stellen Sie ein, dass die Linien in den Skalen 100-1000 ausgeblendet und in den Skalen 0-100 angezeigt werden.
Setzen Sie keine Linien auf die Öffnung und fügen Sie dieses Makro hinzu.
Sie werden bekommen, was Sie wollen.

Hello Bertrand,

Im not very familiar with the Makros but those won't get automatically adapted to the opening of the windows like smart parts do, right?

That means we would have to have several makros for different windows? Hopefully this is something that allplan could
patch in the future updates. Until then I think ill have to manually draw those lines...

Thanks again for your help!

Kind Regards,
Fernando

Das Modell wird an der Stelle inkl. Ausbau dann vollständig - wenn ich das Ansinnen verstanden habe - wenn eine Fensterbank für innen dennoch erzeugt wird, welche ca. 1,5cm dick ist, keinen Überstand od. sowas hat und als Oberfläche die Putztextur verpasst bekommt.
Damit kann dann in der Brüstungsliniendarstellung die gestrichelte Linie verwendet werden und die durchgezogene Linie für die "nicht" Fensterbank kommt aus der "Fensterbank".

Hello Fernando,

You can use a macro in an opening (you had to do like that before the creation of SmartParts for opening).
The macro I sent you adapt to the dimensions of the opening.

To use it in an opening, store it in your Library or insert it in your drawing.
Do a right-click in the opening and use this function: "Makro, SmartPart in Öffnung einsetzen" (Insert Smart Symbol, SmartPart in Opening) (see online help).
Then, select the macro I sent you and it's done.

Make a try and you'll see...



https://connect.allplan.com/ utilizza cookies  -  Maggiori informazioni

Accetta