MINIMÁLNÍ POŽADAVKY:
- Procesor Intel nebo kompatibilní s podporou AVX
- 4 GB RAM
- 10 GB volného místa na pevném disku
- OpenGL 4.2 kompatibilní grafická karta s pamětí 2 GB RAM, rozlišení 1280 x 1024
DOPORUČENÉ POŽADAVKY:
- Procesor Intel Core i5, i7 nebo i9 nebo kompatibilní s podporou AVX
- 16 GB RAM
- Rozlišení displeje až 2560 x 1600 (pro vyšší rozlišení od 4k lze použít škálování operačního systému, více monitorů se musí provozovat se stejným rozlišením)
- Vulkan 1.1 nebo OpenGL 4.2 kompatibilní grafická karta s pamětí 8 GB RAM, grafická karta podle certifikace:
www.allplan.com/info/graphiccards
PODPOROVANÉ OPERAČNÍ SYSTÉMY:
- Windows 11, verzi 21H2 (od Allplan 2021-1-13)
- Windows 10, 64-bit, verzi 1909*
- Windows 8.1, 64-bit
- Windows Server 2019, Standard Edition (pro Citrix)
- Windows Server 2016, Standard-Edition (pro Citrix)
- Windows Server 2012 R2, Standard-Edition (pro Citrix)
PODPOROVANÉ DATOVÉ SERVERY:
- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows Storage Server 2016 pro NAS
DOPORUČENÍ PRO OPERAČNÍ SYSTÉM:
- Windows 10, 64-bit, verzi 1909*
DOPORUČENÍ PRO DATOVÝ SERVER:
- Windows Server 2019
* Edition LTSC 1809 také podporováno
Otestujte si svůj systém a zkotrolujte si, zda váš hardware odpovídá požadavkům aktuální verze programu Allplan 2021.
MINIMUM SERVER SETUP FOR UP TO 5 ALLPLAN USERS:
- Intel Xeon processor or compatible
- 48 GB RAM
RECOMMENDED SERVER SETUP FOR UP TO 5 ALLPLAN USERS:
- 2 x Intel Xeon processor with at least 2 GHz each
- 64 GB RAM
- Server graphics card for vGPU Usage (e.g. NVIDIA Grid) with at least 2 GB per user
RECOMMENDED SERVER SETUP FOR MORE THAN 5 ALLPLAN USERS:
- You need a separate server for every five Allplan users. Make sure that each server meets the requirements stated above.
- Citrix Virtual Desktops Standard 7 2002 / Windows 10 Pro 64-bits for virtual desktop
- WIBU license server on a separate server
NOTES / RESTRICTIONS:
- The Allplan performance under Citrix depends on the network performance and can be somewhat slower compared to local installations.
- An external connection requires a high-performance setup: a latency of not more than 20 milliseconds; download bandwidth of at least 16 Mbit/s (recommended: 25 Mbit/s); upload at least 5 Mbit/s.
- You are advised to set the size of the crosshairs to off (cursor only) in the Allplan options.
Hardware doporučený pro servery Citrix se liší v závislosti na verzi systému Windows Server Edition. Doporučení pro tato vydání naleznete na webových stránkách společnosti Microsoft:
microsoft.com
Informace o konfiguraci, optimalizaci a spuštění Citrix naleznete na webové stránce Citrix:
support.citrix.com
- Od 24.04.2023 je k dispozici nová služba Allplan Exchange Online.
- Od té doby je používání služby Allplan Exchange Online možné pouze ve spojení s Allplan verze 2023 nebo vyšší.
- Webová adresa služby Allplan Exchange zůstává beze změny: https://exchange.allplan.com
- MacBook Pro or iMac as of 2019
- Intel Core i5, i7 or i9 Processor
- 32 GB RAM
- 80 GB free hard disk space
- Graphics board by AMD or NVIDIA
- macOS Catalina 10.15
- Parallels Desktop 16 Pro Edition for Mac
- Windows 10 64 bits, version 2004
NOTES:
- A trial license cannot be used under Parallels.
- Since Parallels Desktop does not support current OpenGL, Allplan uses GDI+; the graphics card is therefore shown as "unsuitable" in the system test.
NETWORK:
- An internet connection that is stable and uninterrupted.
- Minimum requirements: 10 Mbit/s for upload; 20 Mbit/s for download, the latency must be less than 50 milliseconds (you can check this by means of Allplan Performance Diagnostics, for example).
- Recommended: 50 Mbit/s for upload; 100 Mbit/s for download, the latency must be less than 10 milliseconds (you can check this by means of Allplan Performance Diagnostics, for example).
- Current network drivers
- Network connections based on LAN (better than WLAN)
LOCAL FILE STORAGE FOLDER:
- If possible, use a local (SSD) hard drive for the local file storage folder; network drives slow down access. The local file storage folder must not be shared between several users; this might cause massive problems. The Services window shows the path of the local file storage folder.
- You can find information on how to change the path of the local file storage folder in a FAQ on Allplan Connect; for example, enter the following search term: “local file storage folder Allplan Share”.
HARDWARE:
- The hardware requirements are the same as those for Allplan.
- You have an Allplan Bimplus/Allplan Connect/Allplan Campus account
- An Allplan Bimplus team is available
- To create Allplan Share projects, you have to be the team owner or team administrator of the Allplan Bimplus team
- You have one or more Allplan Share licenses