Allplan Connect help

Pokud jste se již zaregistrovali, ale zapomněli jste své heslo, navštivte stránku:

Žádost o nové heslo >>

You don’t have a user name or password yet?

The first thing to do is to log on to the registration page registration page

The important thing is to write in the E-mail address correctly, because we shall be sending an E-mail with a confirmation link to exactly that address. You must click on the confirmation link within 24 hours, since after that it will no longer be valid.

The user name and E-mail address chosen must be unique; in other words, no other user has registered with this E-mail address. It may be, for example, that one of your colleagues has already used something like "info @ your-office.us".

Common user names like "Joe", "Jones" or "JSmith" can also lead to a new registration being rejected because the user name is already being used. .

You can enter your customer number as soon as you register.

Note: If you do not receive the E-mail with the confirmation link (due to a typing error in the E-mail address, for example, or if our E-mail gets stuck in the Spam filter), and you do not click on the link, then it will be impossible to log in. It will then only be possible to re-register, for example with a correct E-mail address, after 24 hours, because the user name will be flagged up as “reserved” for that period of time.

Pro prihlášení mužete také použít existující e-mailovou adresu a heslo úctu Allplan Bimplus

Only correct customer numbers can be entered in the “Customer Number” input field.  

Customers from Germany or a country not listed below

Correct customer numbers in Germany begin with "C300", followed by a 6-digit number. The system also accepts old customer numbers using the pattern: "1234567a" or "60123456".

Customers from France

Correct customer numbers in France begin with "C410", followed by a 6-digit number. The system also accepts old customer numbers using the pattern: "1234567a" or "40123456" or "FA-123-123".

Customers from Italy

Correct customer numbers in Italy begin with "C430", followed by a 6-digit number. The system also accepts old customer numbers using the pattern: "1234567a" or "40123456" or "IA-123-123".

Customers from Austria

Correct customer numbers in Austria begin with "C420", followed by a 6-digit number. The system also accepts old customer numbers using the pattern: "1234567a" or "50123456" or "AA-123-123".

Customers from Switzerland

Correct customer numbers in Switzerland begin with "C400", followed by a 6-digit number. The system also accepts old customer numbers using the pattern: "1234567a" or "40123456" or "SA-123-123".

Customers from the Slovak Republic

Correct customer numbers in the Slovak Republic begin with "C660", followed by a 6-digit number. The system also accepts old customer numbers using the pattern: "1234567a" or "66123456" or „C610“, followed by a 6-digit number.

Customers from the Czech Republic

Correct customer numbers in the Czech Republic begin with "C610", followed by a 6-digit number. The system also accepts old customer numbers using the pattern: "1234567a" or "65123456".

Note: Only valid customer numbers are saved. If the “Customer number” field is still empty after saving, this means that the number you entered is not valid.

As a member of the Allplan community, you can benefit from the experience of Allplan users around the world. To join the dsicussion you have to be logged in.

After opening a contribution with all the answers, you will see a number of different functions at the top right, which are explained in a Tool Tip when you run the mouse over the particular ICON:

Messages
https://www.allplan-connect.com/fileadmin/templates_connect/extensiontemplates/mm_forum/nconnect/img/default/info_mail_off.gif This is where you, whether as a writer or only a reader, can find out about new replies.
Simply click on the envelope icon to activate or deactivate the function.

Bookmark a contribution/Favorite
https://www.allplan-connect.com/fileadmin/templates_connect/extensiontemplates/mm_forum/nconnect/img/default/favorit_off.gif Simply click on the star, and the contribution will land in your own Favorites list (corresponds to the old Bookmark list).
You can find your Favorites under Forum -> MyForum

All done:
https://www.allplan-connect.com/fileadmin/templates_connect/extensiontemplates/mm_forum/nconnect/img/default/mini_unanswered.gif This is how you mark a contribution as answered:
Click on the question mark, and instead of the question mark the “Green Tick” appears.

Assessment
https://www.allplan-connect.com/typo3conf/ext/ratings/res/rating_stars.gifhttps://www.allplan-connect.com/typo3conf/ext/ratings/res/rating_stars.gifhttps://www.allplan-connect.com/typo3conf/ext/ratings/res/rating_stars.gifhttps://www.allplan-connect.com/typo3conf/ext/ratings/res/rating_stars.gifhttps://www.allplan-connect.com/typo3conf/ext/ratings/res/rating_stars.gif You can assess a contribution by means of the 5 stars on the right. If no-one has expressed an opinion (voted) yet, the stars will be white. When voting yourself (running the mouse over it) your OWN current assessment will be shown by the green coloring (5 stars is the best result). The average assessment by all participants is represented in gold/yellow. As well as this, by running the mouse over it you can see the number of votes cast up to now.

You can also change your opinion afterwards, but for security reasons a waiting time of 5 minutes has been built in.

Note: This applies, incidentally, to all assessments in Allplan Connect.

This means that you can assess REQUESTS just as easily as helpful replies (a 5-star contribution corresponds to the "Top Tips" in the old Forum). During the search, by using the assessment filter you can also restrict the result to contributions with a minimum number of stars.

Other Icons

hot  As soon as a contribution has more than 10 responses, it is classified as HOT, and flagged up by way of this icon.

hot  The pin marks up contributions which an administrator has “pinned up”. In other words, these contributions will always be shown first in a forum category, regardless of when a reply was last made to it.

The person formulating the question and the Forum moderator can enter these ticks if the question from the Forum contribution has been resolve.

The green arrow indicates a contribution which has been forwarded to Technical Support.



Above the text input box, by way of the ICON strip, you can insert what are known as BB Codes for the formatting of the text.

Emphasize headings, for example by B (=BOLD)
To do this, mark the heading you want and click on the B.
This will cause a [ b ] to appear in front of the text, and [ /b ] after it ...

Adopt the same procedure for colors, such as red, underlining, and italics.
Colors which are hard to see (light colors) on a white background should be avoided.

Establish Link
To establish a link to another contribution or an FAQ, click on the 5th ICON (chain symbol) and type in the URL. The best way to do this is to copy the URL by CONTROL+C into the temporary memory and enter it here with CONTROL+V.

Example:
How to use: Helpful information about the Connect Forum

This allows for a piece of Code  to be entered into the text. The word suggested, "Linktext", can be changed at random, such as in the example above: How to use: Helpful information about the Connect Forum

Enter a picture
A picture can be uploaded as an attachment via the 3 possible data fields, or a link can be established to an external picture:


The 4th ICON interrogates the PICTURE URL, e.g. that of the Serviceplus ICONs www.allplan-connect.com/fileadmin/templates_connect/img/icon_serviceplus.png

This is then automatically entered as a picture:

 

Note: As far as possible, avoid linking to EXTERNAL pictures, because an embedded image on a NON HTTPS protected page can lead to an error message for other users. (A message such as: “The Web page also contains unsafe elements. Should the unsafe elements be displayed?"). For some other users, such elements may even be suppressed without warning. 

Quoting other contributions
Mark the text and use the command Quote (third from last icon). This will cause the insertion of the code [quote]the text.... [/quote].

CODE
in order to prevent the source text from being taken into account and not displayed (which is helpful, for example, with Allplan formulas for variable text images), mark the formula concerned as CODE:

[code]
Example= ({ code }) * #1234# < 100[/code]

Other Icons
There is also the Lists ICON, for producing listings.
As well as this, you can set the letter size to LARGE (upper case).
The last icon takes all the effort out of formatting.

Preview

Beneath the text input box is the Preview option. This, however, “forgets” files which have already been selected and attached.
If you want to prepare elaborate formatting, and therefore need the Preview function, first press VORSCHAU (preview), and only then attach files.

Note: The preview for your contribution will be displayed beneath the text input box. 

Welcome to the Allplan Connect Forum

Welcome to the User Area of the Allplan Connect Forums. The use of this area is based on a fixed set of rules, and we would therefore like to draw your attention to a few important points with regard to the use of the User Forum.

The Allplan Connect Label

This label describes the rules for producing a thread (posting, contribution), and also a few rules about social interaction within the Allplan Connect Forum.

Forum Rules

1. There are already answers to many questions in the Forum or in our FAQs. The first recommendation is to search through the FAQ databank and the Forum in order to find an answer rapidly to the questions raised.
2. There are a number of different categories in the Forum. Before embarking on a topic, consideration needs to be given to placing it in the most appropriate category. Topics which end up in the wrong categories run the risk of not being noticed.
3.The title of a thread submitted should be short and to the point, and above all should accurately describe the content. Titles such as “Beginner seeks help” or “Problem” are not very helpful.
4. Additions such as “HELP! URGENT!“ etc. are superfluous (and tend to detract from the motivation).
5. It is recommended that questions be formulated in most specific and clear manner possible, so that the answer can be short and to the point as well. Examples such as “XY isn’t working. What might the reason be?” are likewise not a very good idea. It is helpful to indicate the Allplan Version and the extensions being used, with the version if appropriate.
6. Punctuation marks and upper and lower case letters make reading easier. More than one question mark or exclamation mark per sentence, however, are really unnecessary.
7. If the question has been answered, the Resolved Tick also needs to be inserted. This means that it is no longer necessary for anyone to scratch their heads to find a solution.
8. Be patient. If you don’t get an answer to your question within a day, you shouldn’t keep repeating the question in the Forum. A better idea is to wait a few days to see if an answer comes up.
9. It is usual practice to quote the article to which you are making reference in your reply. There are two points to bear in mind in this context:

a. Not too much: In order to avoid producing unnecessarily long articles, you should only quote the passages which you really are concerned about.

b. Not too little: By skilful editing of parts of a text, you can twist a quotation in such a way that it no longer reflects the opinion of the person being quoted. This is to be avoided.

10. Adopting a friendly tone and providing clearly detailed descriptions increase the chances of obtaining helpful responses. Nothing should be written which might be injurious or offensive to the other party in the communication. As soon as a question has been answered, you will not be able to delete it. Deleting contributions can only be carried out by the Forum moderators, in exceptional cases and with good reason.
11. On the Internet, and in forums, the very unrestrained way of talking often results in a familiar form of address which is not necessarily to everyone’s taste. As a general rule of thumb, this might be helpful: If a posting has been signed with a first name, then the person concerned will not mind a familiar form of address; otherwise, we would ask you to adopt a more formal approach.
12. In normal conversation, tone of voice and gestures provide a lot of information which gets lost when a text can only be read. This is why, on the Net, a comment which is meant to be ironic or sarcastic could be taken seriously. Make sure that this cannot happen. As an indicator to the reader, use can be made of what are called “Emoticons“ or“Smiley faces”.
13. Insults, swearing, harassment, general bad-mouthing and personal attacks are strictly forbidden. Any such contributions will be deleted, and may lead to the blocking of the Forum Account.
14. E-mails should not be quoted on the Forum without the permission of the author. The author would already have posted the information received had he wished to do so, but there may be good reasons why he only made it available to you personally.
15. Contributions should not contain any data which reveals the identity of third parties (name, E-mail address, telephone numbers, etc.).
16. Any contributions which constitute contraventions of the law will be deleted from the Forum. The Net is not a space outside the law. You are fully responsible for the content of your contributions, legally and in every other respect.
17. The author himself is responsible for his contributions. With regard to reading messages on the Net, this means that Allplan Deutschland GmbH will check on whether the opinions you voice are meant seriously or are sensible, but will not act in any editorial capacity.
18. The subsequent amendment or deletion of contributions is not desirable. As soon as another reply has been provided for the contribution, the previous one can no longer be altered.
19. The Allplan Connect Forum is not an advertising or publicity platform. Any publicity for products or services is therefore to be refrained from.

In order to be able to download CAD objects, you must be registered.

A high proportion of the Content elements are intended only for customers with Serviceplus contracts.

If you, as a customer without a Serviceplus contract, convert your account (by way of your customer number and an Admin Key) into a Customer Account, you will obtain more extensive access rights to Content Elements than those who are simply users.

There are a few downloads which are only suitable for special language versions of Allplan, and that means they are only accessible to customers from the particular country involved.

It’s often possible, once files have been downloaded and unpacked, to drag them directly onto the Allplan drawing surface.

You can get more detailed information about this in the following three ways:

a) Every Zip file contains a readme.txt, which either contains further REFERENCES, or a link to Help.

b) At the end of each download, 1-x PDF document(s) are attached in each case, with instructions about how to import the file(s) contained in the Zip.

c) Under Content -> MyDownloads next to each download is a Help link. There is a link to the PDF-document(s) there too.

As a general principle it is a good idea to SAVE the download and not open it immediately, if the browser offers this option. Bookmark the place where you have chosen to save the file.

What happens if the download is several MB in size, and doesn’t start even after some minutes have passed?

So as to exclude the possibility of a slow Internet connection, start the download of another big file chosen at random, for example from the Training sector, or watch a video in Allplan Connect. One possible solution may be to delete your browser cache (if necessary, link to http://en.wikipedia.org/wiki/Cache)

 

Please check the following points:
Is the spelling of the search term correct or does it differ from the source?
What about the names of the items you are looking for? Have synonyms been used? For example, TV for television, people for persons, or materials for textures.
Does the sequence of the search terms match that in reality?
Have you entered the search term in the language that is currently set in Allplan Connect?
Are you a Serviceplus customer? Are you trying to find items that are reserved for Serviceplus customers? 
Are you a Serviceplus customer? Have you entered your customer number in your user profile? Otherwise, you cannot find items that are reserved for Serviceplus customers.

Some points to bear in mind:
Use only one search term at any one time, if possible.
Keep search terms as simple as possible.
Try synonyms.
Select the "available" option (you need to be logged in) to restrict the search to items that are actually available to you.
Clear the "available" option (you need to be logged in) to expand the search to all items.
As a Serviceplus customer, make sure that you have filled out your user profile completely. In particular, please check that you have entered your customer number!

You want to enter your admin key, invite colleagues to your Allplan Connect company network or get connected to your comapny admin? Please login to access your compay connection page.

Your current status is Allplan Connect user without company connection:

Please add your customer number in myProfile to get connected to your company network and follow dialog. If you already did this, please relogin.

Initiate a company network

Type in your Admin key to verify your customer number and start a new company network.

If you have not received your admin key via postal mail please use this form to request an admin key.

Connect to your company

Contact your company admin. Click on Connect to Company. Your admin will be sent an email. After he confimed your status, you are part of your company network.

Invite colleagues to your company network

Use the form invite user to invite all your colleagues to your Allplan Connect company network. After they have registered to Allplan Connect they will appear in the list connection requests.

Approve connection requests

Simply change their roles from pending to allocate. If you remove the request from this list, you will need to be sent a request again.

Remove a company member from your list

Click on disconnect and your contact will be moved to connection request from where you can finally delete your contact.

Remove an admin from your network

Disconnect your admin and delete him from your company or confirm his company membership by allocating him to your aprove connections.

You are logged in as verified customer and member of your company network

Become admin of your company

One company can contain of more that one admin. To become an additional admin in your company network enter your admin key in the Admin code field.

To request a new admin key use the admin key request form.

The use of the Service portal is free of charge for all users.

The scope of the offer is dependent on the customer status of the user, however. More information about this is available in the following article:

User rights  in Allplan Connect

1. Uživatelská práva NE-registrovaného uživatele:

Přístup na stránky z

  • Hlavní navigace
  • Volný přístup (pouze ke čtení)
  • 10 % obsahu FAQ
  •  

2.   Rozšířený přístup pro registrovaného uživatele BEZ zákaznického čísla:

  • 5 % Obsahu
  • 20% E-Learningu
  • 50% Dokumentace
  • 70% Fóra, čtení a zápis
  • Poslední Hotfix
  •  

3.   Rozšířený přístup pro registrované uživatele SE zadaným zákaznickým číslem:

  • 30 % veškerého obsahu
  • 40 % veškerého E-Learningu
  • 80% položek ke stažení ze Support, včetně Hotfixes a instalačních balíčků
  • Přístup k PM (personal messages), čtení a konverzeca v PM
  •  

4.   Rozšířený přístup pro registrovaného uživatele SE zadaným zákaznickým číslem který je SP zákazník:

  • 80% veškerého Fóra, čtení a zápis
  • 95% veškerého obsahu, E-Learningu, FAQ
  • PM (personal messages), odesílání a příjem
  • Více ke stažení (např. jako Service Release, Interní verze)
  • Moje podpora (přístup k dotazům na technickou podporu, čtení, zápis)
  • Chat
  • Zobrazení veřejného profilu všech uživatelů fóra
  •  

5.   Additional rights if registered WITH confirmed KD Number of a new license purchase

  • First 100 days after purchase of new license purches - user rights are identic with #4
  • After 100 days after purchase of new license purches - user falls into group #3

6.   Additional rights if registered as Beta tester

  • Access to the "Beta tester" Forum
  • More FAQs during a Beta test phase
  • More downloads (e.g. versions not yet released)

7.   Additional rights if registered as Admin of a company:

  • Access to the page with software licenses
  • Ability to invite new personnel
  • Ability to give clearance to other users from the same company (or identical KD number) 
  • Administration of own company network
  • Ability to assign Admin rights to other members of the company network, or, if necessary withdraw them
  • Complete insight into the profile data of members of one’s own company network

8. There are also additional rights if registered as Personnel of Allplan or a Partner company, as Webmaster, Moderator for the Forum etc.

This means you can register as an Allplan Exchange user or as your Admin to invite you to the Allplan Exchange Company Network

This means you can register or logon as an Allplan Exchange user or as your Admin to invite you to the Allplan Exchange Company Network.

This means you can try out the Allplan Exchange Demo Access *, register as an Allplan Exchange user and invite other People of your Company to the Allplan Exchange Company Network.

* Available in 1. quarter 2013

This means you can login as an Allplan Exchange user and invite other Users of your company to the Allplan Exchange Company Network.

This means you can logon to Allplan Campus as a normal user. You can post job applications in the forum. We need you to confirm being a student by receiving your student ID. Please send a copy via email, fax or mail.

Are you logging in and the language chances or your web palette language setting is not the desired?

Here is your guide how to change the default laguage:

  • go to myProfile
  • edit section "More Settings"
  • Chose your preferred language in the country dropdown
  • save the setting change

The next time you are login in allplan Connect, Allplan Campus or use the web palette you will automatically be forwarded to the desired language.

https://connect.allplan.com/ používá cookies  -  Více informací

Souhlasím