Allplan Fórum

[Otázka] Steel Connections


Hi everyone,
I am new in Allplan. I try to trim a hollow section steel beam with an HEB steel beam, or to join two steel HEB elements, and i don't know how i do it. See attached image.

Přílohy (1)

Type: image/png
Staženo 111
Size: 112,90 KiB

Hi,if you have used 3d solids you can use the cut element command (see image).
If you need to combine the two HEB steel beam into a single element you can use the command for joining 3d solids (see image).
Sorry for my bad English

Přílohy (2)

Type: image/jpeg
Staženo 153
Size: 386,14 KiB
Type: image/jpeg
Staženo 98
Size: 187,39 KiB

Hi, Thanks for your response.

But ,i used the Structural Framing Beam command. See attached image2.

Přílohy (1)

Type: image/png
Staženo 33
Size: 7,07 KiB

Hi, in my Allplan version i don't have structural beams and i don't know how they work.
One solution may be to turn beams into 3d solids.

Ok. Thank you for your help.

Hi,

I have the same question.
I bought ALLPLAN 2022.
I'm new user and I have a lot of questions about steel frame trim.
How to make mitre cut or cut to any surface for steel frame components such as beams and columns?

And if it is impossible to do, than I have another question.
How to make steel frame members to 3D solid? How I understand there is option to cut 3D solid elements like in Autocad with subtract command.

Přílohy (1)

Type: image/png
Staženo 54
Size: 42,60 KiB

Hi,
not the answer you may expect, but so far, I have used roof structures (timbebr/metal) for such, as it is more flexible, you may use the beam, post, or even free element there with respective profile and id does ! accept 3d operatios like cut with plane, boolean etc very well . Or for simpler things, simple beam , column .

So far I had a hard time with the metalic structures dedicated module, . I'll see how that works when I have the time to deal with it more

Citoval MartinsMusa
How to make steel frame members to 3D solid? How I understand there is option to cut 3D solid elements like in Autocad with subtract command.

may use the 3d HEA etc from the lib directly, or use the convert function (convert arh to 3d in submenu..)


https://connect.allplan.com/ používá cookies  -  Více informací

Souhlasím